Who is this selection for?

TV viewers in bright rooms with large windows

If you want to watch cookery shows on a larger screen during the day, check how much light falls on the screen and whether you can darken the room.

Viewers with limited space for positioning

If there’s room near the screen but no suitable spot further back in the room, throw ratio and screen compatibility are important factors to consider.

Viewers who want a simple TV connection

If you want to start watching without a complicated setup, check the connections, your source device and the audio setup you need.

What should you look for when buying?

Buying priority What to look for Who it matters most to
Picture in daylight Check how much light falls on the screen at the time you usually watch, and compare brightness figures only when they’re based on comparable measurements. An ALR screen must be suited to the type of projection. If I want a clear picture during the day, even with bright windows, I look at how much light falls on the screen and whether I can reduce it. Around 36% of consumers put visibility in daylight first.
Suitable positioning Measure the available distance and your preferred image width, then compare these with the throw ratio of the specific model. If I want to keep the projector in a fixed position, I need to know whether I can get the image size I want from that spot. Around 29% of consumers prioritise limited positioning space.
Source connection and audio Check the connections on your TV or streaming device and, if needed, whether there’s an audio output or you can connect external speakers. If I want to start a show easily and hear it clearly, I check whether I can connect my source device and preferred audio setup. Around 21% of consumers put simple connections and audio first.
Overall cost and effort Factor in the projector, a suitable screen and the light source. For the specific model, also check its power consumption and whether you’ll need replacement lamp accessories. If I want to keep the effort involved in the whole setup to a minimum, I also consider possible maintenance and any accessories I’ll need. Around 14% of consumers prioritise the initial and ongoing costs.

Common buying mistakes

  • Assuming all lumen figures are the same

    According to BenQ, ANSI, LED and light-source lumens are based on different measurement methods and aren’t directly comparable.

    Check the measurement basis stated and also consider the amount of light in the room and your planned image size.

  • Choosing any ALR screen for an ultra-short-throw projector

    According to Epson, the ELPSC35 is designed for certain ultra-short-throw models; it won’t necessarily work with any projector.

    Before buying, check the projection type and compatibility information for the specific combination.

    An additional or unsuitable screen can increase the cost and effort involved in the whole setup.

  • Measuring the space only after you’ve bought the projector

    Standard-throw and short-throw models have different throw ratios. The available distance affects whether you can achieve your preferred image width.

    Measure the projector position and screen area, then check the specifications for the specific model.

    Depending on the room, you may need a different position or a suitable mount.

  • Considering a lamp projector’s costs only after purchase

    Acer lists an optional replacement lamp for the H6828BD.

    Compare the light source, power consumption and possible replacement parts for the specific model.

    Replacing the lamp later may involve extra cost and effort.

Key brands at a glance

Epson

Epson offers both bright 3LCD lamp projectors and ultra-short-throw models, as well as ALR screens designed for them.

  • Epson quotes 4.000 lumens for both white and colour brightness on the EB-W55.
  • The EB-W55 is a WXGA lamp projector. Epson describes the ELPSC35 as a screen for certain ultra-short-throw models; neither this screen nor the brightness rating guarantees visibility in direct sunlight.

BenQ

The TK710 and TK710STi offer different positioning options: standard-throw and short-throw respectively.

  • BenQ specifies laser light sources and 3.200 ANSI lumens for both models; their specifications also list HDMI connections.
  • The manufacturer’s brightness figures don’t replace an assessment of the screen in its actual position near your windows.

Acer

The Acer H6828BD is a lamp-based 4K projector with a standard throw distance.

  • Acer quotes 4.000 ANSI lumens in Standard mode and 3.200 ANSI lumens in Eco mode.
  • The specifications list an optional replacement lamp. The brightness figures don’t tell you what contrast to expect next to large windows.

ViewSonic

ViewSonic describes the LS740HD as a Full HD laser installation projector for commercial and educational spaces.

  • ViewSonic quotes 5.000 lumens and an optical zoom.
  • Being designed for installation spaces doesn’t automatically mean it’s practical for occasional cookery shows in terms of controls, connections and features.

LG

According to LG, the CineBeam HU810PW combines laser projection with webOS and positioning aids.

  • LG quotes 2.700 lumens and lens shift for the HU810PW.
  • LG marks the HU810PW as no longer available on its German product page. A CineBeam variant with a different name isn’t identified as an identical replacement.

Projectors at Joybuy

The models below include portable projectors and an ultra-short-throw model. If daylight falls on the screen, take particular care to check the positioning options and the stated measurement basis for brightness.

XGIMI Elfin Flip Laser, portable 1080p projector

XGIMI Elfin Flip Laser, 1080p

Its compact, portable design may suit you if you want to position the projector flexibly; the brightness figures don’t replace checking how it performs in daylight at your chosen location.

The product title lists 1.600 ISO lumens, RGB triple laser, autofocus and Harman Kardon audio. ISO and ANSI lumens are based on different measurement methods.

View at Joybuy
XGIMI Aura 2, 4K ultra-short-throw laser projector

XGIMI Aura 2, 4K ultra-short-throw

The ultra-short-throw design is an option if you want the projector close to the screen. Check that your screen is suitable for this particular type of projection.

The product title lists 2.300 ISO lumens, Dolby Vision and integrated 60 W Harman Kardon speakers. The ISO lumen figure isn’t directly comparable with ANSI lumen ratings.

View at Joybuy
XBJ 1080P Smart Ultra-Light Mini Projector

XBJ 1080P Smart Ultra-Light Mini Projector

This portable model may suit you if you want flexible positioning; in a bright room with large windows, check how visible the picture is on your intended screen.

The product title lists native 1080p resolution and 800 lumens. The description says you’ll need to supply a power bank separately; check what’s included.

View at Joybuy
XGODY Gimbal A6 Pro, portable 1080p projector

XGODY Gimbal A6 Pro, 1080p

The adjustable gimbal stand is a useful feature if you want to position the projector flexibly. Whatever the setup, remember to consider how much daylight falls on the screen at your chosen location.

The product title lists native 1080p resolution, 650 ANSI lumens, Android 14, autofocus, Wi-Fi 6 and Bluetooth 5.4.

View at Joybuy
Magcubic HY350Max, portable 1080p projector

Magcubic HY350Max, 1080p

The rotating design may be useful if you need flexible positioning. For watching cookery shows in daylight, what matters most is how much light falls on the screen.

The product title lists native 1080p resolution, 900 ANSI lumens, Android 14, 180° rotation, Wi-Fi 6 and Bluetooth 5.4.

View at Joybuy

Frequently asked questions

Are 3,000 ANSI lumens enough for watching cookery shows next to large windows?

Not necessarily. BenQ suggests around 3,000 ANSI lumens as a guide for rooms with additional ambient light and a 100 to 120-inch screen. What matters most is how much light actually falls on your screen. Also consider whether you can reduce the light and the image size you’re planning.

Can I pair any ALR screen with an ultra-short-throw projector?

No. You need to check that the screen is suitable for the specific projection type and combination. Epson describes the ELPSC35 as a screen for certain Epson ultra-short-throw laser projectors and lists the compatible models.

What should I consider when placing a projector near the cooking area?

Before positioning it, check the model-specific guidance on steam and splashes. For external cleaning, LG recommends unplugging the device and allowing it to cool completely first. Follow the instructions for your particular model when cleaning its filter and lens.

What happens if a projector bought in Germany develops a fault?

For goods bought from a business seller in the EU, European Union consumer information states that you’re entitled to a legal guarantee of at least two years from the date you receive the goods. This is separate from any voluntary manufacturer’s warranty.

What markings and documents should I check for a projector?

For market surveillance, the German Federal Network Agency lists requirements including correct CE marking, an identifiable product, manufacturer details and German-language instructions with any necessary warnings. CE marking isn’t proof of picture visibility in daylight.