Which pedals are right for you?

Practising wet lines and braking points

If you want to practise taking a different line and braking consistently, look for pedals that let you control both braking and release. For iRacing, the operator explains that the usual, heavily used line can be particularly slippery in the rain; this doesn’t necessarily apply to other games.

Driving without a permanent rig

If you use your pedals on the floor, both the pedals and your seat need to stay stable at your chosen braking force. Logitech G describes support features for the RS Pedals, while Heusinkveld requires a very rigid mounting surface for the Sprint.

Upgrading existing hardware

If you want to keep using your existing wheel or console, check the full connection setup and which parts are actually included in the set. Fanatec, Thrustmaster and Logitech G specify different connection requirements depending on the model.

What should you look for when buying?

Travel-sensor pedals with an upgrade option

A good fit if: You want to practise without a load-cell brake to begin with, with the option to upgrade later.

Bear in mind: The CSL Load Cell Kit is sold separately and is compatible only with the CSL Pedals.

Load-cell set for consistent braking

A good fit if: You want to practise applying brake pressure and releasing the brake in a controlled way.

Bear in mind: Your floor, seat and pedals need to suit your chosen braking force; on consoles, you may need a compatible wheelbase.

Pedals for rigid or adjustable mounting

A good fit if: You already have a sufficiently rigid pedal mount and want to fine-tune the settings.

Bear in mind: Heusinkveld requires a very rigid base for the Sprint; additional features may depend on the model or specification.

Priority What to check before buying Who is this important to?
Controlling your braking Check the sensor technology and adjustment options of the specific set; don’t assume the sensor’s rated load is the same as the force applied at the pedal plate. If I want to practise braking and releasing consistently without assuming that a high rated load means better driving, the brake is my main priority. Around 33% of consumers share this priority.
A stable setup Check the floor, seat, mounting and achievable foot position together. If the pedals or seat move when braking, they become harder to use. Around 27% of consumers put a stable setup first.
Connectivity and compatibility Check the pedal model, PC or console, wheelbase and connection method as one complete setup. If I want to keep using my existing hardware, the whole connection needs to work—not just the USB port. Around 20% of consumers put connection compatibility first.
Controlling your throttle Check whether pedal position or throttle input can be adjusted, and whether the game recognises the axis as required. On corner exit, I want to apply the throttle in a controlled way rather than focus only on the brake. Around 20% of consumers prioritise this.

Avoiding common buying mistakes

  • Assuming a sensor’s rated load equals the foot force needed or guarantees faster times

    Manufacturers may specify sensor values and forces at the pedal plate differently. A technical figure doesn’t prove that you’ll improve with practice.

    Compare only figures measured on the same basis, and consider the brake feel, calibration and your setup.

  • Buying a stiff brake pedal without suitable mounting

    Heusinkveld explicitly requires a very rigid base for the Sprint. A seat or surface that gives way can also make the pedals harder to use.

    Before buying, check that the pedal mount and seat suit your setup. If you use a floor-based setup, consider the support features of the specific set.

    A sufficiently rigid pedal mount may require additional parts or changes to your setup.

  • Assuming optional parts are included as standard

    The Fanatec CSL Load Cell Kit is a separate accessory; the documented two-pedal MOZA SR-P configuration doesn’t include a clutch.

    Before deciding, check the full model name, what’s included and the connection setup you’ll need.

    Depending on the configuration you choose, you may need to buy a Load Cell Kit, USB adapter or clutch separately.

Key brands at a glance

Fanatec

The CSL Pedals can be upgraded with a compatible Load Cell Kit; the CSL Elite Pedals V2 are a separate set with a load-cell brake.

  • Fanatec says the CSL Pedals can be upgraded with the kit designed for them. The CSL Elite Pedals V2 have an adjustable brake and a dedicated USB connection for PC.
  • The CSL Load Cell Kit is compatible only with the CSL Pedals. The features of the Elite Pedals V2 don’t automatically apply to the standard set.

Logitech G

The RS Pedals are a two-pedal load-cell set with described floor and wall supports.

  • Logitech G describes support features and adjustable damper elements.
  • The information doesn’t prove that the pedals will stay put on every floor. According to the setup guide, they connect to a compatible console via a supported Logitech wheel.

Thrustmaster

The T-LCM is a three-pedal load-cell set with adjustable pedal positions.

  • Thrustmaster describes interchangeable brake springs and adjustable height, angle and spacing for all three pedals.
  • According to Thrustmaster, the pedals connect to consoles via the wheelbase. Check that your specific setup is supported.

MOZA Racing

The SR-P is a two-pedal load-cell set with a USB connection for PC.

  • MOZA describes adjustable pedal spacing and software features; the manufacturer specifies a direct USB connection to a PC.
  • The documented two-pedal configuration doesn’t include a clutch. A USB connection for PC doesn’t mean the pedals are approved for consoles; SR-P accessories shouldn’t be confused with similarly named SR-P Lite parts.

Heusinkveld

The Sprint is an adjustable pedal set designed for a very rigid mounting surface.

  • The manufacturer describes adjustable pedal settings.
  • According to the installation guide, the Sprint must be fitted to a very rigid base. This won’t necessarily suit a free-standing desk setup.

Joybuy product selection

A racing pedal set for practising controlled braking and throttle inputs on a securely mounted pedal plate.

MOZA Racing RS082 racing pedals

MOZA Racing RS082

The load-cell brake has an adjustable feel, making this set suitable for repeated braking practice when it can be securely mounted to a racing rig.

This three-pedal set offers adjustable pedal angles and pedal plate height; spring options are specified for the throttle and clutch.

View at Joybuy

Frequently asked questions

Will better pedals automatically teach me the ideal wet-weather line?

No. For iRacing, the operator describes the usual, heavily used line as particularly slippery in the rain. Pedals help you control braking and throttle inputs, but you’ll still need to judge where your car can find grip in the game you’re playing, based on the track and how the car responds. The behaviour in iRacing doesn’t necessarily apply to other games.

How should I set up the brake for practice?

First, make sure your seat and pedals don’t move at your chosen braking force. Then use the mechanical adjustments designed for your model and calibrate the axis. For the T-LCM, Thrustmaster describes interchangeable springs and calibration software. Where possible, change one setting at a time so you can assess its effect as you practise.

Can I connect USB pedals directly to a console?

Not simply because the pedals have a USB connection. Thrustmaster specifies that its pedals connect to consoles via the wheelbase; the setup guide for Logitech G RS Pedals also calls for a compatible Logitech wheel. Check that your specific combination of pedals, wheel and console is supported.

What rights do I have when buying racing pedals online?

For a qualifying distance purchase, you generally have 14 days from delivery to cancel; exceptions and conditions apply. Your Europe, the European Union’s information portal, says that for faulty goods bought from a trader in the EU, you have at least two years of legal protection from the seller. An additional manufacturer’s guarantee doesn’t replace these rights.