Which racing pedals are right for you?

Practising braking points with a fixed rig

If you do lots of practice laps and want to make your braking pressure and release consistent, an adjustable load-cell brake could be a good choice. A securely mounted seat and a firm pedal plate are essential.

Driving without a fixed cockpit

When practising at a desk or on a moving stand, it’s especially important that your seat and pedals stay in place when you brake. Check how securely the pedal set you choose can be attached to your existing setup.

Upgrading an existing system

If you’re keeping your wheel or console, the pedal set’s connection must work with your specific wheelbase and platform. A PC USB connection alone doesn’t mean the set will work with your console too.

What should you look for when buying?

Position-sensing brake

A good fit if: You’re starting out on a moving setup and can’t brace against high pedal forces.

The trade-off: The Fanatec CSL Pedals base set measures pedal position; the load-cell kit is a separate upgrade.

Adjustable load-cell brake

A good fit if: Your setup is stable and you want to practise pressure-based braking inputs consistently.

The trade-off: Resistance and calibration vary by model; the sensor type alone won’t guarantee a personal lap-time improvement.

Highly adjustable pedal set

A good fit if: You have a rigid rig and want to fine-tune pedal angle, resistance or output curves.

The trade-off: These adjustment options are no substitute for a suitable seating position or checking what’s included; some versions don’t include a clutch pedal.

Buying priority What to check Who it matters most to
Consistent braking input Compare the sensor type, brake resistance and calibration for the exact model. If I want to practise braking points with pressure inputs that are as consistent as possible, I look at how the brake and axis can be adjusted. Around 36% of consumers prioritise consistent braking input.
Secure mounting Check the pedal plate, seat and floor together; the manufacturer describes the Heusinkveld Sprint as having a very rigid base. During long practice sessions, I want to prevent my seat or pedals shifting under braking force. Around 29% of consumers prioritise a stable setup.
Connection to your gaming system Check the pedal model, cables, wheelbase, platform and, where relevant, the game for compatibility. If I’m keeping my wheel or console, the connection needs to work with my specific system. Around 21% of consumers prioritise system connectivity.
Pedal position that suits you Compare the adjustment range for spacing and angle, as well as resistance and what’s included. For longer sessions, I want to position the pedals to suit my seat and footwell. Around 14% of consumers prioritise adjustable pedal positioning.

Common buying mistakes

  • Confusing the sensor range with the foot force you need

    Sensor range and actual maximum braking force don’t necessarily refer to the same thing. A study involving experienced sim racers also doesn’t prove a guaranteed training benefit for everyone or for long sessions.

    Only compare figures that refer to the same measurement, and check whether the braking force can be adjusted to suit your setup and seating position.

  • Assuming a base set or two-pedal set is fully equipped

    The load-cell kit for the Fanatec CSL Pedals base set is a separate upgrade; the MOZA CRP2 two-pedal set doesn’t include a clutch pedal.

    Check the full model name and what’s included before planning to buy any extra accessories.

    Depending on the configuration you want, you may need a separate load-cell upgrade or a compatible clutch pedal.

  • Buying a high-force adjustable brake without a suitable base

    Heusinkveld requires the Sprint to be mounted on a very rigid base. If your seat or pedal plate moves, the brake pedal’s position may shift while you practise.

    Before buying, check that your seat and pedal plate are securely mounted and won’t move under braking force.

    If your current setup doesn’t provide a firm enough pedal mount, you may need a suitable pedal plate or a sturdier rig.

  • Assuming a PC USB connection proves console compatibility

    Using PC USB and connecting through a compatible wheelbase are two different ways to use the pedals. For consoles, Thrustmaster says the T-LCM connects through a supported wheelbase.

    Check how the exact pedal model connects, along with your wheelbase, console and game.

Key brands to consider

Fanatec

The CSL Pedals base set and CSL Elite Pedals V2 are different sets: one measures pedal position, while the other comes with a load-cell brake.

  • Fanatec says the braking resistance on the CSL Elite Pedals V2 can be changed using elastomers; the set can be used independently on PC via USB.
  • The load-cell kit for the CSL Pedals base set is a separate upgrade. For a console, check that the full connection setup is compatible.

Thrustmaster

The T-LCM is a three-pedal load-cell set with adjustable springs and pedal positions.

  • Thrustmaster lists six springs and calibration software, and describes different ways to adjust pedal position.
  • For consoles, Thrustmaster distinguishes between connecting through a compatible wheelbase and using PC USB. Check that your specific wheelbase and game work together.

MOZA Racing

The CRP2 is a two-pedal set with force and angle sensors on the brake, plus adjustment options for a fixed setup.

  • MOZA describes pedal curves, angle adjustment and a USB connection for PC use with other wheelbases.
  • The clutch pedal isn’t included with the two-pedal set mentioned here. The manufacturer’s stated sensor range of 0–200 kg is not a recommended foot force.

Heusinkveld

The Sprint is aimed at PC users with a fully assembled, rigid rig who want to adjust their brake and pedal position.

  • Heusinkveld lists an actual maximum braking force of 65 kg for the Sprint, as well as options to adjust pedal angle and output curves.
  • The manufacturer requires a very rigid mounting base. The two-pedal version doesn’t include a clutch pedal.

Logitech G

The PRO Racing Pedals are a three-pedal set with modular pedal positioning and interchangeable resistance elements.

  • Logitech says the pedal modules can be repositioned sideways, while the springs for the accelerator and clutch and the elastomers for the brake can be swapped.
  • The installation guide limits how far the M6 mounting screws can be inserted into the pedal housing to 10 mm. Also check that the connection works with your system.

Joybuy products

Similar products will be available soon.

Frequently asked questions

Do I need a load-cell brake to practise braking points?

No. It’s one option if you have a fixed setup and want pressure-based input; a position-sensing pedal may be a better fit for a setup that can’t support a high-force brake. The sensor type alone doesn’t guarantee faster laps.

What should I adjust after installation?

First set your pedal position and resistance, then calibrate the axes according to your model’s instructions. Thrustmaster requires the T-LCM to be recalibrated after changing the braking resistance; game settings don’t automatically carry over to other games.

Is a USB connection enough to use racing pedals with my console?

No, a USB connection alone doesn’t confirm console compatibility. For the T-LCM, Thrustmaster describes a PC USB connection and, for consoles, a connection via a supported wheelbase using RJ12. Check that your specific pedals, wheelbase, console and game are compatible.

What are my cancellation and faulty-goods rights when buying online from a trader?

For most goods bought online, you generally have a 14-day right to cancel, starting from the day after delivery; exceptions and the relevant returns conditions apply. If goods are faulty, you have statutory rights against the seller, regardless of any voluntary manufacturer’s guarantee. Under EU rules, the statutory guarantee period is generally at least two years.