Which pedals are right for you?

Drivers practising consistent braking points

You want to fine-tune when you brake and how you release the pedal over many laps, and can securely brace against the resistance you want. An adjustable load-cell brake could suit you, but it doesn’t guarantee better training results. Thrustmaster and Heusinkveld describe relevant braking and adjustment features.

Drivers without a dedicated cockpit

You set up at a desk and need to stop your pedals and seat from sliding. Look for suitable support and make sure the whole setup stays in place; Fanatec and Logitech G describe support solutions for their respective pedal models.

Upgraders with an existing wheelbase

You want to keep your current steering wheel, so you’ll need to check the pedal model, connection cable, wheelbase and PC or console as a complete setup. Thrustmaster documents different connection options for the T-LCM on PC and console.

What should you look for when buying?

For longer virtual endurance stints, start by checking the brake type and how stable your setup is. Then make sure the connection suits your existing PC, console and wheelbase.

What matters What to check before buying Who should pay particular attention?
Adjustable braking control Check the brake type on the specific set, along with the springs or elastomers included and the available calibration options. If I want to fine-tune consistent braking points, I need a brake signal and resistance that suit my input. Around 33% of consumers therefore put braking control first.
Stability and seating position Check the support or mounting, how securely the seat stays in place, and the pedal angle and spacing together. For long sessions at a desk, I want to position my pedals and seat securely. Around 27% of consumers therefore prioritise the stability of their setup.
Connection to existing equipment Check the exact pedal and wheelbase models, your PC or console, and the intended USB or RJ12 connection. If I want to keep using my existing wheelbase or console, the connection needs to suit my setup. Around 20% of consumers therefore put device compatibility first.
What’s included and upgrade options Check whether the set includes an accelerator, brake and, if applicable, clutch, along with your preferred mounting and connection components. If you want to expand your set over time or start with a clutch included, check the contents of the exact variant. Around 20% of consumers first look at what’s included and future upgrade options.

Common misconceptions

  • The Fanatec CSL Pedals starter set already includes a load-cell brake

    The starter set measures pedal position. The Load Cell Kit is a separate upgrade, not part of the starter configuration described here.

    Before buying, check the full model name and what’s included. Fanatec specifies additional hardware for standalone USB use with a PC.

  • A USB connection to a PC automatically means it’s compatible with consoles

    Thrustmaster describes different connection options for the T-LCM: on consoles, it connects via RJ12 to a Thrustmaster wheelbase; direct USB connection is intended for PC.

    Check the pedal model, platform and specific wheelbase together before choosing a set.

  • The sensor’s rated load is the same as the foot pressure you need to apply

    For the three-pedal Sprint set, Heusinkveld distinguishes between a 120 kg load cell and a maximum actual braking force of 65 kg. These are different measurements and can’t be compared directly.

    Compare force figures only on a like-for-like basis, and check that the mounting and settings suit your setup.

  • A two-pedal set includes a clutch

    The Fanatec CSL Pedals starter set includes two pedals; the MOZA CRP2 variant described as “Accelerator+Brake” is also a two-pedal set.

    If you need a clutch, check whether it’s included in your chosen variant or needs to be added separately.

Key brands to consider

Fanatec

The CSL Pedals starter set is a two-pedal configuration that measures pedal position, with upgrades available separately.

  • Fanatec describes Hall sensors for measuring pedal position and a way to brace the pedals.
  • The starter set doesn’t include a load cell or clutch; Fanatec specifies additional hardware for standalone USB use with a PC.

Thrustmaster

The T-LCM is an adjustable three-pedal set with a load-cell brake.

  • Thrustmaster specifies six brake springs, as well as adjustable height, angle and spacing.
  • On consoles, the documented connection method requires RJ12 to a Thrustmaster wheelbase; direct USB connection is specified for PC.

Logitech G

The RS Pedals are a two-pedal load-cell set with components for a desk setup.

  • Logitech G specifies a Hall sensor on the accelerator, adjustable brake dampers and wall spacers for the RS Pedals.
  • The support doesn’t remove the need to check that the pedals, seat and floor remain stable in your setup.

Heusinkveld

Sprint is an adjustable pedal range available in two- or three-pedal configurations.

  • The manufacturer’s instructions describe several adjustment options for a fixed rig.
  • Heusinkveld requires the pedals to be mounted on a very rigid base, so bear this in mind when planning your setup.

MOZA Racing

The CRP2 variant reviewed here is an adjustable load-cell set with accelerator and brake pedals.

  • MOZA specifies a 200 kg sensor rating and tool-free adjustment.
  • The sensor rating doesn’t prove how much foot pressure is required or offer an advantage on long stints; the variant described doesn’t include a clutch.

Suitable products at Joybuy

Related products will be available soon.

Frequently asked questions

Do I need a load-cell brake for long virtual stints?

No, a load-cell brake isn’t essential. The Fanatec CSL Pedals starter set measures pedal position, while the T-LCM measures braking force with a load cell. Choose based on the input you want, adjustability and the stability of your setup; manufacturer specifications don’t demonstrate a performance advantage on long stints.

How do I connect T-LCM pedals?

According to Thrustmaster Support, T-LCM pedals connect to a console via RJ12 to a Thrustmaster wheelbase. On a PC running Windows 10 or later, Support describes either an RJ12 connection to a compatible wheelbase or a direct USB connection to the PC, and recommends connecting only one of the two pedal cables at a time.

What should I consider when mounting and calibrating before a long stint?

Mount Heusinkveld Sprint on a very rigid base in line with the manufacturer’s instructions, and adjust the pedal position and angle to suit your seat. For the T-LCM, Thrustmaster recommends not pressing the pedals while connecting them for calibration; always follow the instructions for your specific model.

Does a racing pedal set include a clutch?

It depends on the specific variant. The Fanatec CSL Pedals starter set includes two pedals, and the MOZA CRP2 variant described is listed as “Accelerator+Brake”; the Thrustmaster T-LCM is described as a three-pedal set. Check the contents of the exact model if you need a clutch.