Who are these scanners for?

People scanning with limited desk space

If you’re digitising individual recipe pages and need to clear your desk afterwards, you’ll need to consider both the scanning area and the space required for the open book. Canon lists a scanning area of 216 × 297 mm for the CanoScan LiDE 400, while Epson describes the Perfection V39II as having an integrated stand.

Collectors of bound recipes

With thicker notebooks or text close to the spine, how the particular book lies on the scanner matters. Canon describes a Z-lid, Avision a lift-up cover, and Plustek lists a book-edge design for the OpticBook 4800.

People creating a recipe archive

If you want to file lots of pages and find them again later, test the PDF and, where relevant, OCR workflow with pages of your own. Canon lists PDF scan buttons for the LiDE 400, while Plustek describes OCR and searchable PDFs for the OpticBook 4800.

Which buying factors matter most?

Start by checking the binding and the largest page you need to scan, then consider the space required. If you want a searchable archive, the software workflow matters too.

What matters What to look for when buying Who should pay particular attention?
Desk space and positioning Allow space for the scanner, open book and lid. Canon gives the LiDE 400’s dimensions as 250 × 367 × 42 mm; these don’t include the space needed for the book on the scanner. Epson describes the V39II as having an integrated stand. If I need to put the scanner away after use, I also need to consider the space required to place the book on it. Desk space is the top concern for around 31% of consumers.
Binding and text near the spine Check the binding thickness, where the text sits and how the particular book lies on the scanner. Plustek describes the OpticBook 4800 as having a book edge; its UK and Polish manufacturer pages give different measurements, so check they match the version on offer. If my recipes run close to the spine, I want to see how the page actually lies on the scanner. Capturing bound pages near the spine is the top concern for around 31% of consumers.
Capturing the whole page Measure the largest page or insert, including the margins you want to keep, and compare both dimensions with the scanning area. Canon lists 216 × 297 mm for both the LiDE 300 and LiDE 400; Avision gives the FB10’s maximum as 210 × 297 mm. If I want to capture a large insert in a single scan, I compare it with the usable area. Page size is the top concern for around 19% of consumers.
Filing and finding recipes again Check the PDF output, software requirements and operating system support for the exact model. Canon lists PDF scan buttons for the LiDE 400; Plustek describes OCR for the OpticBook 4800, but that doesn’t confirm how well it will recognise your handwriting. If I want to find specific recipes later, the workflow needs to work with my handwriting. Creating a searchable recipe archive is the top concern for around 19% of consumers.

Which buying mistakes should you avoid?

  • Assuming a stand means you’ll need less space to scan a book

    A stand describes one way to position the scanner, but it doesn’t tell you how much space an open notebook will take up during a scan.

    Measure the usable desk space with the book in place and the lid open, rather than measuring only the scanner when it’s stored away.

  • Assuming a Z-lid, lift-up cover and book edge are the same thing

    These designs aren’t interchangeable, and none on its own guarantees that text right by the spine will be captured in full. Plustek’s UK and Polish manufacturer pages also give different book-edge measurements for the OpticBook 4800.

    Check the design and measurements for the version on offer, and if possible, see how a typical densely written page lies on the scanner.

    A poorly captured page near the spine may need to be scanned again or have its image corrected.

  • Assuming A4 in the product name guarantees every insert will fit

    The maximum scanning area may be smaller than a loose insert or a page with important notes in the margins.

    Measure the largest page, including the margins you want to keep, and compare both dimensions with the stated scanning area.

  • Confusing OCR with accurate recognition of handwritten recipes

    Plustek’s claims about OCR and searchable PDFs don’t show how reliably it will recognise your handwriting.

    Keep a readable image scan, then check the searchable text and ingredient quantities against test pages of your own.

    Checking the searchable text and adding tags manually can take extra time.

Key brands at a glance

Canon

The CanoScan LiDE 300 and LiDE 400 are compact A4 flatbed scanners for scanning individual pages.

  • Canon lists a Z-lid and a maximum scanning area of 216 × 297 mm for both models; the LiDE 400 also comes with a stand.
  • The hinge doesn’t guarantee that text will be fully captured with every book binding. Larger inserts won’t fit in a single scan.

Epson

The Perfection V39II is an A4 flatbed scanner with an integrated stand.

  • Epson describes it as usable flat or on its side, with USB connectivity and USB power.
  • Check how your particular bound notebook lies on the scanner and how much desk space you’ll need. The older Perfection V39 is a different model from the V39II.

Avision

The FB10 combines a slim A4 flatbed design with a lift-up cover for thicker items.

  • Avision lists a height of 46 mm and USB power.
  • A lift-up cover doesn’t prove that text close to the spine will be captured in full; check how the book lies on the scanner.

Plustek

The manufacturer describes the OpticBook 4800 as suitable for bound books and notebooks, with a book-edge design.

  • Plustek lists OCR and searchable PDFs as features of this model.
  • The manufacturer’s UK and Polish pages give different book-edge measurements. Check the measurement for the specific version; OCR claims don’t confirm how well it will recognise handwritten recipes.

Joybuy products

Similar products will be available soon.

Frequently asked questions

Can I scan a thick recipe notebook with a compact flatbed scanner?

It may work if the page you need lies within the scanning area and doesn’t have to be pressed down unnecessarily. Canon describes the LiDE 400 as having a Z-lid, while Avision describes the FB10 as having a lift-up cover; neither guarantees a complete image right by the spine.

Can I use the scanner upright to save space when scanning a book?

Canon lists a stand for positioning and operating the LiDE 400 vertically, while Epson describes the V39II as capable of scanning in a vertical position. This doesn’t tell you whether your bound notebook will sit securely that way. So, to start with, allow space for scanning with the scanner flat.

What should I check before installing the scanner?

Select your operating system in the support section for the exact model, then check for compatible drivers and the scanning software you need. Epson asks you to select an operating system manually when searching for V39II support; Canon provides model-specific drivers and manuals.

Can OCR make handwritten recipes reliably searchable?

You can’t tell from an OCR feature claim alone. Plustek describes OCR and searchable PDFs for the OpticBook 4800; test how well it recognises your own pages and keep a readable image scan.

Can I scan an entire recipe book that belongs to someone else for my own use in Germany?

The fact that you want to use the file privately doesn’t automatically mean you have permission. The German Patent and Trade Mark Office notes that books generally cannot be copied for private use. Distinguish your own notes from someone else’s protected content, and check the rights and intended use before digitising an entire book.