Who are these solutions for?

Editing existing recordings

You’re comparing files you already have and want to match their perceived loudness without buying recording hardware you don’t need. The Audacity manual explains how to do this with loudness normalisation in the software.

Solo recording with changing levels

You record your own voice or instrument and need suitable inputs, as well as a way to monitor recording levels and spot potential clipping. Depending on the model, Focusrite User Guides and MOTU document different level-monitoring features.

Monitoring multiple signal paths

You switch between headphones, speakers or other line-level sources, so you need to plan your connections and, where necessary, separate signal paths. Focusrite User Guides and MOTU document the connections and controls for each model.

What should you look for when buying?

Editing existing files only

A good fit if: You’re only comparing digital recordings and already have suitable audio output.

Trade-off: This won’t give you any extra analogue inputs or outputs, or new hardware controls.

A suitable recording path

A good fit if: You occasionally want to record a voice or another single source; the Audient iD4 MKII has separate microphone and instrument paths.

Trade-off: Two analogue input channels don’t automatically mean you can use two XLR microphones at the same time.

Two channels with level monitoring

A good fit if: You want to record two suitable sources or monitor input and output levels on the device. MOTU documents level meters on the M2, while Focusrite offers Auto Gain and Clip Safe on the fourth-generation Scarlett 2i2.

Trade-off: These features support recording, but they don’t automatically match the loudness of finished files.

Extra line-level connections

A good fit if: You want to connect line-level sources as well as microphones, or plan to use extra outputs – for example, with the fourth-generation Focusrite Scarlett 4i4 or the MOTU M4.

Trade-off: Extra line inputs aren’t extra microphone preamps. Also check that the signal routing you need is possible.

The key question is whether you’re editing files or recording as well. These needs involve different things: software loudness, recording levels, monitoring and additional signal paths.

Need What to check before buying Who is it most relevant to?
Loudness of existing files Check your software’s loudness function and choose a target suited to how you’ll use the files. Consider whether you need any new inputs or outputs at all. When I compare recordings I already have, I want to match their loudness in software rather than buy new hardware for the job. Around 36% of consumers put the loudness of existing files first.
Setting levels for new recordings Check that you have the right microphone, line or instrument input, and test the loudest section you expect to record before you start. When I record a voice or instrument, I want to monitor the input level and keep an eye out for potential clipping. Around 29% of consumers prioritise recording-level monitoring.
Headphones and speakers Check the connection types and compare separate headphone and monitor controls with the equipment you already own. When I switch between headphones and speakers, I want to be able to set the levels for each monitoring path. Around 21% of consumers prioritise monitoring-level control.
Additional signal paths List the microphone, instrument and line-level sources and monitoring paths you need to use at the same time, then check the connections on the specific model. When I need to connect several sources at once, I need suitable inputs and the right outputs. Around 14% of consumers put additional signal paths first.

Avoid common buying mistakes

  • Confusing recording level, monitoring volume and file loudness

    Loudness normalisation processes files; hardware level controls manage other signal paths. Turning up your headphones won’t make saved recordings any louder.

    First decide whether you’re recording or just comparing files. Then choose the right software function or the hardware connections you need.

  • Assuming every socket is the same type of connection

    On the MOTU M4, two of the four analogue inputs are extra line inputs. On the fourth-generation Scarlett 2i2, plugging into a front jack input disables the XLR input on the same channel.

    Check the input types, channel assignments and output signals you need in the manual for the exact model.

  • Confusing recording compression with loudness matching

    Universal Audio describes the Volt 276’s “76 Compressor” feature as processing for recorded signals; it isn’t evidence that the device can match the loudness of finished files.

    Choose tonal or dynamics features only if you want to use them while recording, and check the finished files separately in your software.

Key brands to consider

Focusrite

The fourth-generation Scarlett 2i2 is designed for two recording channels, while the fourth-generation Scarlett 4i4 adds extra line connections.

  • Focusrite User Guides describe Auto Gain and Clip Safe on the fourth-generation Scarlett 2i2 as features for setting recording levels.
  • Focusrite User Guides note that plugging into a front jack input disables the XLR input on the same channel.

MOTU

The M2 is suited to a compact two-channel setup with level meters; the M4 adds extra line inputs and outputs.

  • MOTU documents input and output level meters on the M2.
  • The M2’s RCA outputs carry mirrored signals. On the M4, two of the four analogue inputs are extra line inputs, not four microphone preamps.

Audient

The iD4 MKII combines a microphone path and an instrument path in a compact setup.

  • Audient’s technical specifications list two analogue input channels.
  • The two channels are designed for different uses. If you want to connect two XLR microphones at the same time, “two inputs” alone isn’t enough to help you choose.

Solid State Logic

According to Solid State Logic’s product description, the SSL 2 MKII offers different line, instrument and microphone modes, as well as stereo loopback.

  • These connection and loopback features may be useful for different recording and monitoring tasks.
  • The product description isn’t an independent performance test. The “Legacy 4K” feature isn’t documented as a way to match the loudness of finished files.

Universal Audio

The Volt 276 is described as having a switchable vintage preamp function and an analogue “76 Compressor” function.

  • These features are for recording and are separate from adjusting the loudness of files afterwards.
  • Check the exact model generation before choosing. A recording feature doesn’t guarantee that finished files will have the same loudness.

Suitable products at Joybuy

For recording or livestreaming together with two microphones connected to a computer or phone.

Yinkaer G10-P17-P17 podcast kit with two microphones

Yinkaer G10-P17-P17 podcast kit with two microphones

For recording or livestreaming together with two microphones connected to a computer or phone.

According to the product name, the kit includes two 3.5 mm condenser microphones and a sound card or audio mixer with effects.

You’ll still need a suitable software function to match the loudness of finished files; the kit doesn’t replace this step.

Joybuy

Frequently asked questions

Can an audio interface automatically make saved recordings equally loud?

Not just by using its input or headphone controls. The Audacity manual describes loudness normalisation with an adjustable LUFS target; the right target depends on how you’ll use the files.

How should I count inputs if I want to connect several sources?

Check the signal type and the number of channels you can use at the same time in the manual for the exact model. On the fourth-generation Scarlett 2i2, plugging into a front jack input disables the XLR input on the same channel, so plan to connect a microphone and a jack source to different channels.

What should I keep in mind when setting up and maintaining my interface?

Choose connections to suit your sources and monitoring equipment, then start by checking levels with a test section. For MOTU M-Series audio interfaces, the manufacturer’s manual recommends disconnecting the device from the computer before cleaning it and using only a dry cloth.

What return costs might apply to an online purchase?

According to the EU consumer information service Your Europe, online purchases from a trader generally come with a 14-day withdrawal period from the date of delivery. You may have to pay return costs if you were told about them before buying and the trader doesn’t cover them. For faulty goods, the same information says the trader pays the return costs.

What are the rules on CE marking and disposal in Germany?

The European Union requires a CE mark only for product types covered by relevant harmonised legislation that specifically requires one. Check the applicable marking for the specific product listing. The German Environment Agency advises that electrical appliances must not be disposed of with household waste.