Who is this relevant to?

Uploading design files from a Wi-Fi dead spot

If you send large files from a home office behind solid internal walls, first check whether the wireless connection is slowing down your upload. Telekom Deutschland points out that a single router won’t reach every part of a home and that building materials can affect Wi-Fi.

A home office where you could run a LAN cable

If you can connect an additional access point at your workplace via Ethernet, the connection between access points won’t need to pass through walls wirelessly. NETGEAR Support describes Ethernet as a wired backhaul connection for an Orbi system.

Replacing a router while keeping your existing connection

If you want to replace your router as well as improve Wi-Fi coverage, consider your connection type and any mesh devices you already have. Features vary by model: a router with a DSL modem serves a different purpose from a device with Ethernet WAN.

What should you look for when buying?

Keep your router and move it

A good option if: Uploads work well near the router and you can find a better place for it.

Bear in mind: Wall construction and the location of your broadband connection may limit where you can put it.

Add an access point with a LAN connection

A good option if: You can run an Ethernet cable to your home office or the additional node.

Bear in mind: You’ll need a suitable cable route and devices that work with your planned network setup.

Add a wireless mesh node

A good option if: You can’t run a cable but can find a spot with a good connection to the router.

Bear in mind: The wireless connection between the nodes remains part of the upload route.

Replace your router

A good option if: Your current device isn’t suitable for your connection type, the ports you need or your preferred mesh system.

Bear in mind: A new router on its own won’t guarantee reliable uploads through thick walls.

Telekom explains that building materials such as stone and concrete can affect wireless connections. The Bundesnetzagentur provides a measurement method to check the actual upload and download speeds available on your broadband connection.

Buying priority What to check before buying Who is it important to?
Wi-Fi through internal walls Check upload speeds where you work and possible locations for a node; plan for a wired LAN backhaul if you can run a cable. If my home office is behind thick walls, I want to know whether an access point with LAN can bypass the wireless connection. Around 36% of consumers are most concerned about getting a connection through walls.
Usable upload speed in practice Compare upload speeds at the broadband connection and in your home office before using the router’s peak Wi-Fi speeds as a benchmark. I want to find out whether my broadband connection or Wi-Fi is limiting file uploads. Around 29% of consumers are most concerned about the upload speed available to them.
Connection type and mesh compatibility Check whether you have DSL, cable or fibre with a separate device in front of the router; make sure it’s compatible with your existing mesh devices. When replacing my router, I want to keep using my existing connection and mesh devices. Around 21% of consumers prioritise connection type and mesh compatibility.
Setup and maintenance Consider how many nodes you’ll need and check for update information for the specific hardware version. Before buying, I want to understand what equipment I’ll need to set up and maintain the version. Setup and maintenance are the main priority for around 14% of consumers.

Avoiding buying pitfalls

  • Confusing total Wi-Fi speed with file upload speed

    The Wi-Fi data rate advertised by a router doesn’t measure your actual upload speed to the internet. Your broadband connection may also limit file uploads.

    Compare measurements at the broadband connection and in your home office before replacing your router for a higher advertised Wi-Fi speed.

  • Putting a wireless mesh node behind the heaviest shielding

    A wireless node needs its own connection to the router. If you put it somewhere with little or no reception, that wireless link will still be part of the connection.

    Check reception at the potential node location or, if possible, plan for an Ethernet backhaul.

  • Assuming the same model name means the same version and features

    The LAN port information in Joybuy’s FRITZ!Box 7690 listing differs from AVM’s data sheet. TP-Link’s support notice specifically applies to hardware version 1.0 of the Archer BE550 for the EU; don’t assume it applies to other versions without checking. The Bundesnetzagentur explains that CE marking and accompanying documentation apply to products covered by the relevant EU regulations.

    Check the hardware version, ports and required product documentation for the specific device. CE marking alone isn’t proof of Wi-Fi performance.

A guide to suitable brands

FRITZ!

According to AVM, the FRITZ!Box 7690 combines an integrated DSL modem with mesh and LAN ports. It could be a good fit if you’re looking to replace a DSL router as well as improve Wi-Fi.

  • AVM’s data sheet lists two 2.5 Gbit/s ports and two Gigabit ports.
  • The Joybuy product description instead lists four Gigabit LAN ports for the FRITZ!Box 7690. Check the specifications of the exact version before buying.

TP-Link

According to TP-Link, the Archer BE550 is a router with Ethernet WAN, several LAN ports and EasyMesh. It may be suitable if you already have a compatible device for your connection.

  • TP-Link lists four 2.5 Gbit/s LAN ports for the Archer BE550.
  • A router with Ethernet WAN doesn’t replace an integrated DSL modem. The support notice specifically applies to EU hardware version 1.0.

ASUS

ASUS lists router, access point and AiMesh node modes for the RT-BE88U. This matters if you need a particular operating mode for your planned setup.

  • The German data sheet lists several Ethernet ports and 2.4 and 5 GHz wireless connectivity.
  • Maximum Wi-Fi speeds aren’t a measure of performance in a home office behind concrete walls.

NETGEAR

According to NETGEAR, the Orbi RBE772 set includes an RBE771 router and an RBE770 satellite to create a network with multiple access points.

  • NETGEAR describes both wireless and Ethernet backhaul options.
  • Suitability depends on the specific set, where you place it and whether you can run a cable. General guidance isn’t a test of this model’s ability to transmit through walls.

Telekom

Speedport routers and Speed Home WLAN offer a mesh setup documented by Telekom, which may be especially relevant if you already have compatible devices.

  • Telekom describes mesh extensions for compatible Speedport models.
  • According to Telekom, older models such as Speedport Smart and Smart 2 don’t support mesh. Check the exact router model and firmware.

Routers and mesh systems at Joybuy

The products below are routers and mesh systems to consider if you’re replacing your router or improving Wi-Fi coverage across several rooms. Before buying, check that the connection type and the mesh setup you want are compatible with your network.

TP-Link Deco M4 AC1200 Mesh Wi-Fi System, 3-pack

TP-Link Deco M4 AC1200 Mesh Wi-Fi System, 3-pack

Could be a good fit if you need coverage in several rooms and want router or access point mode.

Wi-Fi 5, AC1200 and two Gigabit LAN/WAN ports per unit.

The product description lists three units for the mesh system.

View at Joybuy
FRITZ!Box 7530 AX, Wi-Fi 6 DSL router

FRITZ!Box 7530 AX, Wi-Fi 6 DSL router

Could be a good fit if you’re replacing your router and need a DSL modem and mesh support.

According to the product description, it supports ADSL and VDSL, including VDSL Supervectoring 35b.

The description lists four Gigabit LAN ports and mesh support.

View at Joybuy
FRITZ!Box 7590 AX, Wi-Fi 6 DSL router

FRITZ!Box 7590 AX, Wi-Fi 6 DSL router

Could be a good fit if you need a DSL router with mesh master functionality and wired connections.

The product description lists an integrated VDSL modem and four Gigabit LAN ports.

According to the description, this model can act as a mesh master to support an expandable home network.

View at Joybuy
MERCUSYS Halo H1200G AC1200 Mesh Wi-Fi System, 2-pack

MERCUSYS Halo H1200G AC1200 Mesh Wi-Fi System, 2-pack

Could be a good fit if you need two mesh units to provide Wi-Fi coverage across several areas.

Wi-Fi 5, AC1200 and Gigabit Ethernet ports.

The description says to connect one Halo unit to the modem via Ethernet.

View at Joybuy
MERCUSYS Halo H25BE Mesh Wi-Fi Set, Wi-Fi 7 BE3600, 2-pack

MERCUSYS Halo H25BE Mesh Wi-Fi Set, Wi-Fi 7 BE3600, 2-pack

Could be a good fit if you’re looking for a mesh set with a router and repeater to provide multiple access points.

Wi-Fi 7, BE3600 and three Gigabit ports per unit.

The product description recommends placing the second unit in an open area within range of the first.

View at Joybuy

Frequently asked questions

How can I tell whether my broadband connection or Wi-Fi is slowing down my upload?

Compare your upload speed at the broadband connection with the speed where you work. The Bundesnetzagentur provides a measurement method to check the fixed-line speed agreed in your contract. If the connection is poor only in a room further away, you should also check the Wi-Fi signal.

Where should I put a wireless mesh node?

Don’t place it where there’s no usable reception, as the node also needs a connection to the router. Check the signal at the potential location. If you can run a cable, Ethernet backhaul could be an alternative.

Should I replace my router or extend my Wi-Fi?

Extend your Wi-Fi in a targeted way if the problem mainly affects a room further away and your connection works well near the router. Replacing the router is more appropriate if your current device isn’t suitable for your connection type, the ports you need or your preferred mesh system.

Can I use a suitable router I’ve bought myself in Germany?

Yes. The Bundesnetzagentur explains that you’re free to choose a suitable router and that your provider must give you the access details you need. However, ‘suitable’ doesn’t mean that every model works with every connection type.

Which product markings and documents should I check?

The Bundesnetzagentur explains that products covered by the relevant EU regulations must have CE marking and the required accompanying documentation. Check the specific device version and its documentation; a general product description doesn’t prove that an individual listing complies with the requirements.