Who the camera needs to suit

Detail photographers

You want to show tiny inclusions, edges or surface details clearly, so you focus on magnification ratio and depth of field rather than megapixels alone. Canon Germany and Sony Germany explain what to consider when taking close-ups in their macro photography guides.

Photographers using window light

You want to capture shine and transparent areas clearly, while leaving enough room to control the light and reflections beside the camera. Canon Academy and Nikon Germany explain how reflections and changing light affect your shots.

Photographers just starting out with pendants

You want to photograph whole pendants and try your first close-ups without changing equipment too often. A close-up mode or kit zoom can be a good starting point, but check that it can frame your details as closely as you need.

What to look for when buying

Compact camera with close-up mode

A good fit if: You want to get close to small pendants without changing lenses. OM Digital Solutions says the Tough TG-7 can take close-ups from as close as 1 cm.

The trade-off: The minimum focusing distance alone doesn’t tell you how large the pendant will appear in the frame or how much room there is in front of the lens.

System camera with kit zoom

A good fit if: You want to photograph whole pendants and try different compositions. Canon says the RF-S 18–45 mm offers up to 0.25x magnification with manual focusing at close range.

The trade-off: This isn’t the same as 1:1 magnification, so you may need another lens to capture very small inclusions.

System camera with macro lens

A good fit if: You want small inclusions or surface details to take up a large part of the frame. Sony and Nikon specify a 1:1 magnification ratio for their respective macro lenses.

The trade-off: The lens needs to be compatible with your camera. At high magnifications, precise focusing and lighting become even more important.

Start by deciding how you want to frame your shot. Then check how the lens distance, window light and desired depth of field will work together in your shooting space.

Priority What to check before buying Who it matters most to
Capture fine details Compare the magnification ratio of the specific lens with the composition you want, and consider the working distance. If I want small inclusions or edges to fill the frame, the lens’s magnification ratio matters to me. Around 33% of consumers prioritise capturing details that fill the frame.
Control reflections and colours Check there’s room to reposition your subject or use a reflector. Consider white balance and, where appropriate, a suitable polarising filter. With shiny resin, I want to be able to move reflections and assess the colours even when the window light changes. Around 27% of consumers prioritise controlling reflections and colour.
Get started easily For a compact camera, check the framing in close-up mode. For a kit, compare the exact lens name and magnification. If I want to start by photographing whole pendants and taking my first close-ups without changing lenses, an easy set-up matters more than maximum magnification. Around 20% of consumers prioritise getting started simply.
Keep more of the subject in focus Check that you can control the aperture and focus, and that there’s room for a tripod in your shooting space. Capturing multiple focus points may require extra shots. When photographing a three-dimensional pendant, I want as much of its depth in focus as possible and don’t mind spending longer on the shoot. Around 20% of consumers prioritise sharpness throughout the subject’s depth.

Common buying mistakes

  • Assuming “macro” or a short focusing distance guarantees a certain level of detail

    Magnification ratio describes how large the subject appears on the sensor. A short focusing distance isn’t the same as a particular magnification ratio.

    First decide whether you want the whole pendant or a tiny inclusion to fill the frame, then compare the specifications for the specific lens.

    You may need an additional macro lens later if you want significantly higher magnification.

  • Budgeting for the camera body alone

    The 1:1 magnification of the Sony and Nikon combinations mentioned comes from a separate macro lens in each case, not from the camera body alone.

    Before ordering, check exactly what’s included and whether the lens fits your camera’s mount.

    An additional compatible lens and, possibly, a tripod will take up space in your shooting area.

  • Expecting a different camera to solve reflections on its own

    The position of the window light affects reflections on shiny resin. A polarising filter can reduce reflections on suitable non-metallic surfaces, but Canon Academy notes that it also reduces the amount of light.

    First change the position of the subject and the light. Only consider a filter that fits your lens if the reflections are still distracting.

    Changing the lighting set-up or adding a suitable polarising filter may mean extra equipment.

Relevant brands at a glance

Canon

Canon offers a kit option with the EOS R50 and RF-S 18–45 mm. The RF 85 mm F2 MACRO IS STM is another lens option for EOS R cameras.

  • Canon specifies up to 0.25x magnification for the RF-S 18–45 mm when focusing manually at close range.
  • The RF 85 mm F2 MACRO IS STM offers 0.5x magnification, according to Canon. These figures describe the respective lenses, not the image quality they’ll deliver for resin pendants.

Sony

The α6400 is an APS-C E-mount camera body that can be paired with the APS-C SEL30M35 macro lens, which needs to be considered separately.

  • Sony specifies a 1:1 magnification ratio for the SEL30M35.
  • At the closest focusing distance, Sony says there’s just 2.4 cm between the front of the lens and the subject, which can make it harder to light the subject from the side.

Nikon

The Z50II can be paired with the separately available NIKKOR Z MC 50 mm 1:2,8 for macro photography.

  • Nikon specifies a 1:1 magnification ratio for the lens.
  • If you want more of the subject in focus, focus stacking may require several shots taken at different focus points.

OM SYSTEM

The Tough TG-7 is a compact camera with a fixed lens and close-up function, so you can avoid changing lenses.

  • OM Digital Solutions specifies close-ups from as close as 1 cm and around 12 million effective pixels.
  • The minimum focusing distance alone doesn’t tell you the magnification ratio or how large the pendant will appear in the frame.

Products at Joybuy

Related products will be available soon.

Frequently asked questions

Does a short minimum focusing distance prove that a lens is a true macro lens?

No. You should also compare the maximum magnification ratio. Sony Germany explains that 1:1 means the subject appears life-size on the sensor. The minimum focusing distance and the clear working distance in front of the lens are two different measurements.

What can I do if only the front edge of my pendant is in focus?

Try a different aperture and focus carefully. If the depth of field still isn’t enough, you can combine several shots taken at different focus points into a focus stack. The subject needs to stay still while you take the shots.

How can I keep colours consistent when the window light changes?

Check the white balance using a test shot and adjust it if the light changes. Nikon Germany points out that different light sources within the same frame can have different colour temperatures.

What rights apply when buying a camera privately in Germany?

If you buy as a consumer from a business seller, your statutory rights relating to faulty goods apply against the seller. Your Europe, the European Union’s consumer portal, states that this protection lasts for at least two years from the date you receive the goods. For a distance sale, you generally have a 14-day right to cancel from delivery, subject to legal exceptions. An additional manufacturer’s guarantee doesn’t replace these rights. These consumer rights don’t apply when you buy as a business.