For an overhead brush lettering lesson, an adjustable ring light is a good fit if it lights the page without getting in the way of the camera or your writing hand. If you need to position the light and camera independently, or shadows and reflections remain, a separately positionable diffused panel light could be a useful alternative. TechSmith Academy recommends assessing the lighting through the camera view, while Adobe points out that white balance also affects the colours of the paper and ink.
Who this lighting matters to
Instructors filming overhead
If you’re filming the pen tip, your hand and the lettering as it takes shape on the desk, the light needs to reach the writing surface without obstructing your movements. TechSmith Academy recommends assessing your setup through the camera view.
Teachers using coloured templates
If you’re showing paper and ink colours under room lighting, check the light colour and camera white balance together. Adobe explains that white balance affects not only white areas, but also the colours in the image.
Teachers working at a small filming desk
If space is limited, the mount needs to suit the desk edge and your preferred camera position. Hama describes one ring light with a tabletop tripod; Elgato specifies a desk clamp for most desks up to 6 cm thick for a separate light.
What to look for when buying
Adjustable ring light on a desk or tripod
A good fit if: You can position the ring and camera so the pen tip and lettering remain visible.
Consider: A smartphone holder alone doesn’t guarantee a suitable overhead view. Check the angle, distance and space for your writing hand.
Separately positionable LED panel light
A good fit if: You want to position the camera and light independently, or a ring light leaves distracting shadows or reflections.
Consider: The mount and light angle need to suit your desk edge or tripod, and you’ll need to adjust them to your setup.
Existing room lighting
A good fit if: The writing surface is already well lit and you want to start by adjusting the position and white balance.
Consider: Different light colours can make paper and ink look discoloured; artificial light sources can also cause banding in your video.
| Buying priority |
What to check before buying |
Who it matters most to |
| Keep the pen tip in view |
Check the angle and distance; film a writing test from the intended camera position. |
If I need to show the pen tip and hand movements from above, I position the light so the writing surface stays clear. Around 36% of consumers put a clearly visible pen stroke first. |
| Assess paper and ink colours |
Check the light colour and brightness on the specific model; test it with the paper and camera you’ll be using. |
If coloured templates need to look natural in the video, I match the lighting and white balance to the actual paper. Reliable paper and ink colours are a priority for around 29% of consumers. |
| Mount the light and camera |
Check the desk edge or tripod surface, mount, angle and cable routing against your planned setup. |
When space on the filming desk is limited, I want to mount the light and camera in a way that suits the writing surface. A suitable desk mount is the top priority for around 21% of consumers. |
| Flicker and power supply |
Film with the camera you’ll actually use and the room lights switched on; check the connection and power source required. |
If I want to record longer takes without visible banding, I test the lights and power supply with the camera. Around 14% of consumers prioritise flicker-free footage and a suitable power supply. |
Ring light buying pitfalls
-
Assuming a phone holder is suitable for overhead filming
The connections and tripod height don’t tell you whether you can position the camera, ring and writing hand correctly at the same time.
Plan the positions above the actual page and check the angle, connections and space required before buying.
-
A larger ring won’t automatically eliminate hand shadows
Light position and writing movements also affect the image. If shadows remain, a separately adjustable panel light can give you another way to arrange the lighting.
Compare the lighting setups with a short writing test through the camera view.
-
Confusing colour temperature with flicker-free video
White balance and potential flicker artefacts are separate filming considerations. Adjustable light colour doesn’t prove that your video will be free of banding.
Test the paper colour and moving pen tip in a short video with the room lighting you plan to use.
Visible banding or inaccurate colours may mean you need to film again.
Brands and models to consider
Hama
Ring light kits for smartphone filming; the SpotLight FoldUp 102 II is documented as an adjustable desktop setup.
- For model 00004658, Hama lists ten brightness levels, three colour temperature settings, and smartphone and accessory connections.
- The manufacturer’s stated tripod height of 52 to 138 cm doesn’t confirm that the desired overhead view will work at every writing desk.
NEEWER
Ring light kits for use with a separate tripod; the RL-18 is a larger setup positioned beside your work table.
- The manufacturer lists a 45 cm ring diameter, an adjustable angle and an included tripod for the RL-18.
- According to the manufacturer, the 3200 K and 5600 K light colours are achieved using colour filters; the tripod setup needs enough space.
Godox
Ring lights with adjustable light colour; the LR160 is documented as a model for a separately planned lighting setup.
- The LR160 manual specifies stepless dimming from 10–100% and a colour temperature range of 3300–8000 K.
- Two compatible NP-F970 batteries are an optional extra that must be bought separately; these details don’t automatically apply to other Godox models.
Elgato
Separately positionable LED panel lights are an alternative if you want to position the light and camera independently.
- Elgato specifies a desk clamp for the Key Light Air MK.2 that fits most desks up to 6 cm thick.
- This model isn’t a ring light; check that the clamp fits your desk and that you can achieve the desired light angle. According to the manufacturer, brightness depends on the USB-C power output.
Joybuy products for your desk setup
This selection includes ring lights for raised desktop filming and for mounting directly on your recording device.
No image available
3-in-1 ring light tripod with 10000mAh power bank, black
For overhead filming, the tripod can provide an elevated setup. Check in a test recording that the camera and light stay above the page without obscuring your writing movements.
The tripod is described as suitable for smartphone and camera filming and extends to 178 cm. Features listed include a 360° adjustable head, ten brightness levels and three colour temperatures.
Use only compatible chargers with the lithium-ion battery. Keep it away from water, fire and high temperatures, and don’t open or damage it.
Joybuy
No image available
ULANZI 4-inch ring light for smartphone
If you want the light to sit directly on your recording device, this compact ring light is an option. According to the product description, it attaches to a smartphone, laptop or tablet.
Features listed include three colour temperatures from 3000–7000 K and five brightness levels. Check beforehand that the mount suits your recording device and the light angle you want.
Joybuy
Frequently asked questions
Where should the light be positioned while I’m writing?
Position it by checking the camera view: try writing a few strokes and adjust the angle or distance if the pen tip, your hand or the paper shows distracting shadows. Indirect or diffused lighting can help with harsh light.
Is adjustable colour temperature enough to show ink colours accurately?
No, the setting alone isn’t enough. Match your light sources as closely as possible and check the white balance with your paper and camera; colour temperature figures don’t tell you what the finished image will look like.
What can I do about banding in video under artificial light?
Test a recording with the lights you’ll actually have switched on. Changing the shutter speed may reduce flicker artefacts; which features and settings help will depend on your camera and light sources.
What should I check about the power supply and accessories?
Check the power source required and the mounts included with the specific kit; also see whether a mains adaptor is included if you need one. If you buy from a business seller, an additional manufacturer’s guarantee doesn’t replace your statutory rights if the goods are faulty.
Can I return a ring light bought online?
For a qualifying online consumer purchase from a business seller, you generally have 14 days from delivery to cancel; statutory exceptions may apply. Check the terms and any return postage costs before ordering. The right to cancel is separate from your rights if the goods are faulty.