Who needs to make this decision?

Household with a Wi-Fi dead spot by the TV

The internet connection works near the router, but Wi-Fi is weak where you watch on another floor. The location and connection of an additional Wi-Fi point matter more than the router’s maximum data rate alone.

Household with Ethernet between floors

Existing network sockets make it possible to use distributed Wi-Fi points with a wired connection. Ethernet backhaul and the operating mode need to suit your setup, as the information from TP-Link Germany explains.

Household without Ethernet between floors

If you want wireless coverage on several floors, each additional node needs a usable connection to the main unit or another node from its intended location. FRITZ!, ASUS and NETGEAR describe relevant extension or mesh solutions, although the actual wireless connection depends on your home.

What should you look for when buying?

First check your internet connection and reception where you watch, then see what Ethernet connections are available. Only then decide whether it’s better to extend your existing network or add several new Wi-Fi points.

For a three-floor home, you can compare options by what matters most to you. The proportions below are a rough guide.

Priority What to check before buying Who is it important to?
Reception where you watch Check the connection by the TV and at possible locations for additional Wi-Fi points; don’t rely on coverage claims alone. If the picture streams smoothly near the router but stutters by the TV on another floor, I want to improve reception right there rather than choose a product based on its maximum data rate. That’s why around 36% of consumers put coverage where they watch first.
Wired connection between floors Check your existing cables, Ethernet backhaul and the wiring required for router or access point mode. TP-Link Germany describes different connection options depending on the operating mode. If there are network cables between floors, I want to connect the Wi-Fi points using them and make sure I choose the right operating mode. Around 29% of consumers prioritise a wired connection between floors.
Wireless connection without cables Check possible node locations and their connection to the main unit; refer to tri-band specifications for the relevant model only. If there’s no network cable, I need to find a location where the additional node can still get a usable wireless connection. Around 21% of consumers focus on the wireless connection between floors.
Existing network and ongoing costs Check your router model, mesh compatibility, connection type and any services sold separately. Don’t assume FRITZ! Mesh features will work in the same way with routers from other manufacturers. If only one area has poor coverage, I want to keep using the equipment I already have where possible, rather than replace everything unnecessarily. Around 14% of consumers prioritise reusing existing equipment and checking for potential additional service costs.

Which buying mistakes should you avoid?

  • A high Wi-Fi data rate will automatically fix a dead spot

    Advertised model speeds and coverage figures don’t show how well the connection will work by your TV, through the floors in your home.

    Check reception where you watch, then decide how many Wi-Fi points you need and where to put them.

    An additional Wi-Fi point or new cabling may mean more equipment and installation work.

  • Placing the wireless node right in the dead spot

    A wirelessly connected node needs a usable connection to the network upstream. It can’t reliably provide one if you place it somewhere with no reception.

    Check the wireless signal at your planned location and take any existing Ethernet between floors into account.

  • Assuming a repeater, mesh router and modem are the same thing

    A repeater extends a network, while a mesh system can be used with your existing modem or router, depending on the setup. A repeater doesn’t automatically replace your internet modem.

    Before buying, check the connection type, the modem you already have and how you want the device to operate.

  • Assuming additional services are included indefinitely

    Additional security or management features may be sold separately. NETGEAR includes one year of Armor with the RBK763S; advanced features for the eero 6+ require a separate subscription.

    Check which features you can use without an additional subscription.

Key brands at a glance

FRITZ!

A good option for extending an existing FRITZ! home network in a specific area.

  • The FRITZ!Repeater 3000 AX is a tri-band repeater with two Gigabit LAN ports; the 1200 AX is a more compact dual-band option with one Gigabit LAN port.
  • According to FRITZ!, a FRITZ!Box and connected FRITZ!Repeaters work together as a mesh. Check compatibility with routers from other manufacturers separately; a repeater doesn’t replace a DSL, cable or fibre modem.

TP-Link

Deco X50 is an expandable dual-band mesh system with Wi-Fi points you can place around your home.

  • The German product sheet lists three Gigabit ports per unit and optional Ethernet backhaul.
  • The wiring options depend on whether you use router or access point mode. A manufacturer’s coverage figures don’t prove how well the wireless connection will work in a particular home.

ASUS

ZenWiFi XT9 is a tri-band Wi-Fi 6 system with router and access point modes.

  • The German specification sheet lists a 2.5 Gbit/s WAN port.
  • Specifications may vary by country and package. The technical details alone can’t tell you how well the wireless signal will work in your home.

NETGEAR

Orbi RBK763S is a tri-band Wi-Fi 6 package comprising a router and two satellites.

  • NETGEAR lists a dedicated connection between the router and satellites, plus one year of Armor included.
  • Advertised coverage and speed figures don’t prove how well the connection will work across three specific floors. Check the terms for features after the included year.

eero

eero 6+ is an app-based dual-band mesh system that can be expanded, according to the manufacturer.

  • A three-pack is available for this system.
  • Advanced security and management features are offered separately by subscription. Advertised coverage doesn’t replace checking how the system works in your own home.

Joybuy products for whole-home Wi-Fi

The Joybuy products below are mesh systems with distributed Wi-Fi units for households looking to improve reception across several rooms or floors. Whether a wireless node gets a usable connection at your planned location depends on your home and where you place it.

TP-Link Deco BE22 Wi-Fi 7 mesh system, 2-pack

TP-Link Deco BE22 Wi-Fi 7 mesh system, 2-pack

This two-unit set is worth considering if you want to place several Wi-Fi points around your home; the wireless connection through floors depends on where you position them.

Wi-Fi 7, dual-band, Gigabit Ethernet.

View at Joybuy
TP-Link Deco M4 AC1200 mesh system, 3-pack

TP-Link Deco M4 AC1200 mesh system, 3-pack

Three units let you extend a Wi-Fi network across several rooms; whether the connection is strong enough by your TV depends on where you place them in your home.

Dual-band, AC1200, Gigabit ports.

View at Joybuy
TP-Link Deco S4 AC1200 mesh system, 3-pack

TP-Link Deco S4 AC1200 mesh system, 3-pack

This three-unit set is an option if you plan to place Wi-Fi points in several rooms; check coverage between floors at each location.

Dual-band, AC1200, Gigabit ports.

View at Joybuy
MERCUSYS Halo H1200G AC1200 mesh system, 2-pack

MERCUSYS Halo H1200G AC1200 mesh system, 2-pack

This two-unit mesh set could suit a setup where you plan to add a Wi-Fi point in another room; check that it can connect to the network from there.

Dual-band, AC1200.

View at Joybuy
MERCUSYS Halo H25BE Wi-Fi 7 BE3600 mesh system, 2-pack

MERCUSYS Halo H25BE Wi-Fi 7 BE3600 mesh system, 2-pack

This two-unit set is designed for a setup with distributed Wi-Fi points; wireless reception where you watch depends on where you place them.

Dual-band, 3 × Gigabit ports per unit.

View at Joybuy

Frequently asked questions

Do I need a new router to watch a 4K nature documentary?

No. First check your streaming service, subscription and playback device. If the film already stutters near the router, the cause may be your internet connection or playback conditions. The requirements of the service you’re using are what matter.

How can I tell the difference between an internet problem and a Wi-Fi problem?

Compare the connection where you watch with the one near your router. The German Federal Network Agency offers a desktop broadband speed test to check a fixed-line internet connection. A good result from that test alone doesn’t prove that Wi-Fi coverage by your TV is good.

How do I connect Deco units using existing network cables?

The wiring depends on the operating mode. TP-Link Germany explains that in router mode, satellites connect via the LAN side of the main Deco or a switch connected to it; additional connection options are available in access point mode. Before connecting everything, check which mode is set up.

Can I connect a router I’ve bought myself in Germany?

Yes. According to the German Federal Network Agency, you can choose a router that’s available to buy and suitable for your connection; your provider must supply the necessary access details. Check that a particular device is compatible with your connection before buying.

What should I look for in a Wi-Fi device sold in Germany?

Check the labelling and documentation for the specific device. For radio equipment, the German Federal Network Agency lists CE marking, device identification, manufacturer details, a German-language instruction manual and a declaration of conformity among the requirements. CE marking is the manufacturer’s declaration that the product meets relevant requirements; it doesn’t prove how well Wi-Fi will work in your home.