A DC mini UPS is a good fit for a home-office router if the voltage, connector, polarity and power output are compatible. If you already have power supplies, a Schuko UPS is easier to connect, while a power station may be more suitable if you need a larger energy reserve. Make sure you back up the entire connection chain: with an FTTH connection, a separate modem may need power as well as the router. No local power reserve can guarantee that your provider’s network will remain available during a power cut.
Who would benefit from a router UPS?
Home workers who rely on an uninterrupted connection
If you rely on your router during a call or work session, check whether your devices will keep running when the UPS switches to battery power. The connections and changeover behaviour of the specific device are key.
Households with a separate fibre modem
With FTTH, a separate modem may need power as well as the router if the router doesn’t have a built-in fibre modem or a compatible plug-in modem. Telekom explains this requirement for a separate fibre connection.
Anyone planning for a longer backup period
If you want to keep network devices powered beyond brief interruptions, consider the runtime against the combined load of your devices. A device’s stated capacity and power output don’t remove the need to check this.
What should you look for when buying?
DC mini UPS
A good fit if: you want to power a router and other devices with compatible DC connections.
Consider: The voltage, connector, polarity and total power output must suit all connected devices; it won’t power 230 V devices.
Schuko UPS
A good fit if: you want to connect your router and, where necessary, modem using their existing power supplies.
Consider: Not every socket provides battery backup during a power cut. Also check the runtime under the combined load.
Power station with backup function
A good fit if: you need a larger energy reserve or want to power other compatible devices, as well as cover short interruptions.
Consider: A stated changeover time doesn’t guarantee that your particular router will keep running without restarting.
| Requirement |
What to check before buying |
Who it matters most to |
| Keep running without the router restarting |
Check the changeover behaviour and continued operation with your specific router. |
If I rely on a live connection while working from home, I don’t want the router to restart when it switches to battery power. Around 36% of consumers are likely to prioritise uninterrupted router operation. |
| Power the entire connection chain |
List the devices you need; check the battery-backed outputs and total load. |
If my FTTH connection needs a separate modem, that device needs power as well as the router. Around 29% of consumers are likely to prioritise powering several network devices. |
| Runtime under your own load |
Compare manufacturer figures alongside the relevant load, and take the combined power consumption of your devices into account. |
If I’m planning for a longer backup period, I want to know how long the entire connected setup will stay powered. Around 21% of consumers are likely to prioritise a longer runtime. |
| Battery replacement and maintenance |
Check which replacement battery is suitable for the specific model and read the replacement instructions. |
If I want to use the device for longer, I need to know whether its battery can be replaced. Around 14% of consumers are likely to prioritise ease of maintenance and battery replacement. |
Common selection mistakes
-
Backing up only the router
A separate modem may be part of the connection chain with FTTH. If it loses power, keeping the router connected on its own won’t be enough.
Trace the connection from the fibre entry point to the router and make a note of every device along the way that needs power.
-
Assuming every UPS socket has battery backup
On the Eaton 3S550D, three Schuko outputs provide surge protection only; they won’t keep the router running during a power cut. Other models may also have a mix of battery-backed and surge-protection-only outputs.
Only connect essential power supplies to outputs marked for battery backup.
-
Taking the rated power or runtime as the router’s runtime
A runtime figure applies under specific load conditions: CyberPower gives the BR700ELCD a runtime of six minutes at 50% load. The Salicru SPS 700 ONE’s ‘up to 20 minutes’ figure can’t be applied to a particular router without checking the load.
Compare runtimes only alongside the load they’re based on and the load of your connected devices.
-
Assuming a UPS guarantees an internet connection
A UPS powers the devices connected to it on your premises; it doesn’t automatically power the communications infrastructure outside your home. Germany’s Federal Office of Civil Protection and Disaster Assistance points out that internet and mobile phone services can also be disrupted during power cuts.
Assess your local power supply separately from the availability of your provider’s network.
Key brands at a glance
Salicru
The SPS NET2 is a DC mini UPS for compatible network devices; the SPS 700 ONE is a Schuko UPS.
- Salicru says the SPS NET2 has 5, 9 and 12 V DC outputs, as well as 5 V USB; the total load must not exceed 18 W.
- The SPS 700 ONE’s ‘up to 20 minutes’ figure isn’t a guaranteed router runtime unless you check the load of the connected devices.
APC by Schneider Electric
The Back-UPS BE650G2-GR is a 230 V UPS with Schuko sockets for devices with existing power supplies.
- Schneider Electric Germany lists this model at 650 VA/400 W and says its battery can be replaced by the user.
- Having eight sockets doesn’t automatically mean all eight outputs have battery backup; check the markings on the specific model.
Eaton
The 3S Gen2 3S550D is a Schuko UPS for a small group of network and office devices.
- Eaton says it offers three battery-backed Schuko outputs at 550 VA/330 W; the battery is replaceable.
- Three additional Schuko outputs provide surge protection only and won’t power the router during a power cut.
CyberPower
The BR700ELCD is a line-interactive UPS with Schuko outputs and an LCD display for network and office devices.
- CyberPower gives the BR700ELCD a rating of 700 VA/420 W and a runtime of six minutes at 50% load.
- The runtime figure at 50% load can’t be directly applied to a much lower router load; also check which outputs have battery backup.
EcoFlow
The RIVER 3 is a power station alternative if you need a larger energy reserve for compatible devices.
- EcoFlow lists 245 Wh and a rated output of 300 W, with changeover times of under 20 or 10 ms.
- The product page lists several variants. Check that the power and changeover specifications apply to the variant you’re considering, and make sure your router will keep running during changeover.
UPS options for your router
Similar products will be available soon.
Frequently asked questions
Does the modem also need to be connected to the UPS for fibre broadband?
If your FTTH connection needs a separate modem that requires power, you should include it alongside the router. Telekom says a separate modem is needed for FTTH if the router doesn’t have a built-in fibre modem or a compatible plug-in modem.
Does a router UPS guarantee internet or phone service during a power cut?
No. A UPS powers the devices connected to it on your premises; it can’t guarantee that your provider’s network will stay available. Germany’s Federal Office of Civil Protection and Disaster Assistance points out that internet and mobile phone services can also be disrupted during power cuts.
What should I check when connecting a DC mini UPS?
The DC UPS’s output voltage, connector, polarity and current output must match the requirements of your specific router. For the Salicru SPS NET2, the manufacturer also specifies a maximum total load of 18 W.
What should I check about battery replacement and maintenance?
Check whether a suitable replacement battery is available for the specific model and follow the replacement instructions. Schneider Electric Germany says the battery in the APC Back-UPS BE650G2-GR can be replaced by the user; Eaton also describes the 3S550D battery as replaceable.
Can I put a used UPS in the household waste in Germany?
No. Under Section 10 of the Electrical and Electronic Equipment Act (ElektroG), electrical and electronic waste must be collected separately from unsorted municipal waste. For removable used batteries, the Federal Environment Agency recommends returning them to collection points at retailers or local authorities.