Who should consider this decision?

Cookery class in a Wi-Fi dead spot

If the kitchen and router are on different floors, what matters is the reception where you watch, as well as finding a suitable spot for an additional unit.

Home with network cabling

If you can use network cables between floors, check whether you can connect multiple units this way rather than relying solely on Wi-Fi.

Household with an existing router

If you want to keep your existing FRITZ!Box or Speedport, check which extender is compatible with your specific router model before you buy.

What should you look for when buying?

First, check your internet connection and Wi-Fi reception separately. This will help you work out whether a suitable extender will do the job or whether you need several units.

Concern What to check before buying Who is this important to?
Reception in the kitchen and across floors Check reception where you watch and consider where additional units could be placed. If I watch my cookery class in the kitchen while the router is on another floor, reception right where I watch is what matters to me. Around 36% of consumers share this main concern.
Connection for streaming Consider your internet connection speed, Wi-Fi reception in the kitchen and the connection between units separately. TP-Link describes Ethernet backhaul for Deco as connecting the units via a network cable. I want to make sure the stream isn’t let down by an unsuitable connection between the units. Around 29% of consumers put streaming stability first.
Compatibility with your router and internet connection Check the full router model and whether you have DSL, cable or fibre broadband. If you’re replacing your router, also check whether you need a modem. If I want to keep using my router or find a suitable replacement for my connection, I check compatibility carefully. Around 21% of consumers prioritise this concern.
Set-up and ongoing maintenance Factor in additional units, possible cable routes, set-up and the work involved in keeping the system up to date. I want to know how much set-up and ongoing maintenance I’ll need to take on before I buy. For around 14% of consumers, this is the main consideration.

Common buying mistakes

  • Assuming the advertised mesh coverage guarantees reception in your kitchen

    Ceilings and walls can make it harder to get Wi-Fi coverage between floors. A manufacturer’s figures for coverage or data rates can’t predict what reception will be like where you actually watch.

    Check reception in the kitchen and possible positions for the units before deciding how many to buy.

  • Confusing a LAN port with wired backhaul

    A LAN port for a device on its own doesn’t tell you how a mesh unit connects to the rest of the network.

    Check how the units are designed to connect to each other, and what the cabling requirements are for the operating mode you choose.

  • Overlooking your connection type and ongoing maintenance when replacing your router

    A new router must be compatible with your type of connection. According to the consumer advice centre, buying your own device also means taking care of set-up, configuration and updates yourself.

    Before switching, check your connection type and whether you need a modem. Also find out what set-up and updates you’ll need to handle yourself.

Key brands to consider

FRITZ!

A possible option for extending a compatible FRITZ! home network if you want to keep using your existing router.

  • FRITZ! lists three wireless units and two Gigabit LAN ports for the FRITZ!Repeater 3000 AX.
  • These model specifications don’t guarantee reception across all three floors or compatibility with every router.

TP-Link

Deco mesh systems are worth considering if you need several units to provide coverage in different areas of your home.

  • TP-Link describes Ethernet backhaul for Deco, as well as router and access point modes.
  • Cabling and connection requirements depend on the operating mode. Advertised Wi-Fi speeds and coverage areas aren’t measurements taken in your home.

Deutsche Telekom

The Speedport Smart 4 with Speed Home WLAN is a mesh combination designed for use with specific products from the same manufacturer.

  • Telekom describes how to extend this router’s coverage across several floors.
  • For the Speedport Smart 4 on a fibre-only connection, Telekom specifies an additional modem. This doesn’t automatically apply to other Speedport models.

NETGEAR

The Orbi Pro SXK80 is a tri-band system aimed at businesses. For a cookery class at home, it’s mainly worth considering if you need its additional networking features.

  • The manufacturer’s datasheet lists separate Wi-Fi networks and a backhaul band.
  • According to NETGEAR, the Orbi Pro Wi-Fi 6 router can’t be paired with Orbi Home or older Orbi Pro Wi-Fi 5 satellites.

eero

The eero 6+ is a mesh system set up using an app.

  • The product page describes a three-pack of the eero 6+.
  • According to the provider, advanced security and management features are available through a separate subscription.

Suitable products on Joybuy

This selection includes mesh kits for covering several areas, a FRITZ!Box DSL router and Wi-Fi extenders for an existing network.

TP-Link Deco BE22 mesh system, 2-pack

TP-Link Deco BE22 (2-pack)

Could suit you if you need Wi-Fi coverage in several areas and are considering a mesh system for streaming.

Wi-Fi 7, dual-band and Gigabit WAN/LAN ports on each unit; router or access point mode.

View on Joybuy
TP-Link Deco S4 mesh system, 3-pack

TP-Link Deco S4 (3-pack)

Could be an option if you need a single mesh network to cover several rooms or floors.

AC1200, dual-band and Gigabit ports. The description lists operation with a router or modem.

View on Joybuy
FRITZ!Box 7590 AX DSL router

FRITZ!Box 7590 AX

Could suit you if you’re replacing a DSL router and want to set up a FRITZ! mesh network with compatible FRITZ!Repeaters.

Wi-Fi 6, built-in VDSL Supervectoring 35b modem and four Gigabit LAN ports. For cable or fibre broadband, the product description specifies an external modem connected to the WAN port.

View on Joybuy
MERCUSYS ME80X Wi-Fi 6 range extender

MERCUSYS ME80X

Could extend your existing Wi-Fi if you can place the extender somewhere that still receives a signal from the router.

Wi-Fi 6, AX3000 dual-band and a Gigabit port. The instructions recommend placing it between the router and the area with a weak signal.

View on Joybuy
MERCUSYS Halo H25BE mesh system, 2-pack

MERCUSYS Halo H25BE (2-pack)

Could be an option for Wi-Fi in several areas; the second unit needs to be within range of the first.

Wi-Fi 7, BE3600 dual-band and three Gigabit ports on each unit.

View on Joybuy

Frequently asked questions

How can I tell whether my internet connection or Wi-Fi is disrupting the cookery class?

Check your internet connection speed and Wi-Fi reception in the kitchen separately. The German Federal Network Agency’s broadband measurement tool lets you compare your connection’s actual data rate with the rate agreed in your contract. For your buying decision, you’ll also need to check reception where you’ll actually use the service.

How do I set up Deco units with a wired connection?

According to TP-Link, first set up the units on the same network using the app, then connect them with a cable. In router mode, the manufacturer says to connect the satellite unit to the main Deco’s LAN port or to a switch connected to it. TP-Link describes other connection options for access point mode.

What’s involved in buying your own router?

According to the consumer advice centre, you’ll need to take care of set-up, configuration and updates yourself. Before switching, also check that the router and modem are compatible with your connection, and find out what changing routers means for your internet and phone contract.