Which scanning workflow is right for you?

Owners of negatives in mixed formats

If you find negatives in formats other than 35 mm while packing, check the film formats and compatible holders for the specific device. For the x66-Scan, reflecta lists 135, 127 and certain 120 formats; KODAK Photo Plus lists 135, 110 and 126 for the Slide N Scan.

Moving with lots of 35 mm film strips

If you want to look through lots of 35 mm photos before packing, check how easy it is to reload and how the film is fed through. Plustek says the OpticFilm 135i scans six frames from a strip per pass; reflecta describes the RPS 10S as having automatic film transport for longer 35 mm strips.

Preserving important individual shots

If you want to edit selected negatives again later, consider the output format and how you’ll back up your files. reflecta lists DNG output for the RPS 10S, and the German Federal Office for Information Security recommends backing up important files.

What should you look for when buying?

Buying criterion What to check before buying Who is this important to?
Film format and holder Compare the stated formats and what’s included with the negatives you have. For the x66-Scan, reflecta lists 135, 127 and certain 120 formats; KODAK Photo Plus lists 135, 110 and 126 for the Slide N Scan. If I find negatives in different formats while packing, I want to know in advance which holders will fit. Around 28% of consumers put compatibility with their existing film formats first.
Work involved Check how many frames the holder takes, whether the film is fed through automatically and whether you need a computer. Plustek lists six frames per strip per pass for the OpticFilm 135i; reflecta describes the RPS 10S as transporting between three and 40 frames. If I only have occasional access to a scanning space while moving, I want to minimise interruptions to reload. Around 22% of consumers prioritise the work involved.
Editable image files Check the output formats for the exact model variant. reflecta lists DNG for the RPS 10S; the x66-Scan has a 14 MP sensor resolution and interpolated output of 22 MP. For important individual shots, I want to be able to edit the tones later rather than keep only a finished preview. Around 22% of consumers put editable files first.
Dust correction Identify the film type and check the specific software for correction tools that don’t use infrared. LaserSoft Imaging explains that infrared correction cannot be used with silver-based black-and-white film. For traditional black-and-white negatives, I want to know which dust-correction options will actually work. Around 17% of consumers prioritise dust and scratch correction.
Back-up and organisation Open your test files, match them to the film sleeves and make a separate back-up before packing. If the originals are about to disappear into moving boxes, I want to be able to find my scans again and not keep them on just one storage device. Around 11% of consumers put back-ups and organisation first.

Which mistakes should you avoid?

  • Assuming infrared dust removal works with all black-and-white film

    Infrared correction is not a reliable dust-removal solution for silver-based black-and-white film. LaserSoft Imaging explains that the emulsion blocks the infrared light required for this process.

    Check the film type and find out which non-infrared correction tools are actually available in the specific software version.

    Depending on the condition of the negatives, you may need to clean them further or correct the images manually.

  • Confusing interpolated megapixels with captured sensor detail

    According to reflecta, the x66-Scan has a 14 MP sensor resolution and interpolated output of 22 MP. A larger output file does not, on its own, mean that more detail has been captured by the sensor.

    Assess the sensor specification and output format separately, and check a test image for detail and tonal definition in both light and dark areas.

  • Overlooking holders, memory cards and data back-ups

    Having the right format support also depends on the holders. The European KODAK Slide N Scan requires an SD card to operate, but one is not included.

    Before buying, check what’s included against your film formats and open test files before packing the originals.

    Depending on the device and your collection, you may need compatible holders or an extra storage device for back-ups.

Which brands are worth considering?

Plustek

The OpticFilm 135i is a computer-based 35 mm scanner for film strips and slides, with a small automatic feeder.

  • Plustek says it scans six frames from a strip or four slides per pass. The F.A.Z. Kaufkompass gives this model a positive rating for scan quality.
  • The F.A.Z. Kaufkompass considers the feeder capacity limited for large volumes. Infrared correction is not a reliable reason to buy it for silver-based black-and-white film.

reflecta

According to the manufacturer, the standalone x66-Scan handles 135, 127 and certain 120 formats; the computer-based RPS 10S is designed for longer 35 mm film strips.

  • reflecta says the x66-Scan saves JPEG files directly to an SD card. For the RPS 10S, the manufacturer lists DNG output and transport for three to 40 frames.
  • The x66-Scan’s 22 MP output is interpolated; its sensor is 14 MP. The RPS 10S’s infrared correction is not a reliable dust-removal solution for silver-based black-and-white film.

KODAK Photo Plus

The standalone Slide N Scan, with its 5-inch display, is specified for black-and-white negatives in 135, 110 and 126 formats.

  • KODAK Photo Plus lists a 14 MP sensor and compatible adapters for the formats shown.
  • An SD card is required to operate the scanner but is not included. The product specifications listed do not confirm availability from any particular retailer.

Epson

The Perfection V850 Pro shows the range of film and print formats a flatbed scanner with a transparency unit can handle.

  • Epson lists holders for 35 mm and 120/220, as well as TIFF output.
  • Epson marks the model as no longer available on its German product page; this does not indicate whether it can currently be bought elsewhere.

Rollei

The DF-S 1300 SE is a standalone slide and negative scanner with a display, designed for straightforward viewing.

  • Rollei lists an effective resolution of 13 MP and output upscaled to 25 MP.
  • The German manufacturer’s shop marks the model as sold out; this does not confirm whether it is currently available elsewhere.

Matching products at Joybuy

Related products coming soon.

Frequently asked questions

Where should I start if I find negative strips in different formats while packing?

Sort the negatives by film format and note which sleeves or envelopes they belong to. Try a compatible holder for each format, as the term ‘film scanner’ alone does not guarantee support for 120, 127, 110 or 126.

Will an infrared feature remove dust from my black-and-white film?

You shouldn’t assume it will work with traditional silver-based black-and-white film: LaserSoft Imaging explains that its emulsion blocks infrared light. Instead, check the condition of your negatives and which non-infrared correction tools are actually available.

What else should I factor into my scanning workflow?

Depending on the device and film format, you may need compatible holders, a memory card or a separate storage device for back-ups. The SD card required to operate the European KODAK Slide N Scan with its 5-inch display is not included.

What are my rights if a scanner I bought online is faulty?

For a consumer purchase in Germany, your statutory rights against the seller are separate from any voluntary guarantee. You’ll generally also have a 14-day right to cancel an online order, starting from the day you receive the goods; you must notify the seller that you wish to cancel. The type of contract and any exceptions should be considered in each case, as explained by the Verbraucherzentrale.

Can an old film scanner go in the general waste when I move?

No. The German Environment Agency describes the separate collection of waste electrical and electronic equipment, including at local collection points or recycling centres and suitable retailer take-back points. Which retailers are required to accept returns depends on the statutory conditions.