Who are these scanning options for?

35 mm photographers short on PC storage

If you want to capture compatible landscape negatives as JPEGs without first storing scans on your computer, a scanner with direct SD card output could be a good fit. Remember to back up your files separately afterwards; the Federal Office for Information Security recommends making regular backups.

Photographers with 120 film negatives

Check the image size and film holder before choosing a storage option: a 35 mm scanner won’t take roll film just because it’s described as a negative scanner. For the x66-Scan, reflecta lists specific Type 120 sizes from 6 × 4.5 to 6 × 9 cm.

Panoramic photographers who want to edit their scans

If you want to scan a panoramic format and then edit it on your computer, first check whether a suitable holder is available and will work with your workflow. Plustek says the OpticFilm 135i supports panoramas with an optional film holder.

What should you look for when buying?

First, decide which negatives you want to scan. Then choose a storage and file output option that suits the way you plan to edit them.

Buying consideration What to look for Who will find this especially important?
Scan storage Check for SD card output, supported card types, file format and how you’ll transfer files later. If I don’t want to use up limited PC storage while capturing scans, saving them directly to a card matters to me; around 33% of consumers put a storage-friendly scanning workflow first.
Film format and holder Check the film type, actual image dimensions and scan area against the supplied or optional holder. If my negatives include 35 mm, panorama or Type 120, I mainly want to make sure the image size and holder are compatible; around 27% of consumers prioritise film format compatibility.
File format and detail Check the native sensor resolution separately from the interpolated output; confirm the file format and which software you’ll need. For the x66-Scan, reflecta specifies a 14 MP sensor and interpolated output of 22 MP. If I want to edit my scans later, the file format and clear details about how images are captured are essential to me; around 20% of consumers put this need first.
Batch scanning Compare your own film strips with the number of frames scanned per pass and the PC requirements. Plustek says the OpticFilm 135i can scan up to six frames from a film strip per pass; reflecta describes the RPS 10S as automatically transporting 3 to 40 frames. If I want to scan lots of compatible negatives one after another, it matters to me how often I’ll need to reload the strips and whether a PC-based workflow is suitable; around 20% of consumers prioritise throughput.

Common buying pitfalls

  • Assuming “22 MP” means native sensor resolution

    According to the manufacturer, the reflecta x66-Scan has a 14 MP sensor and interpolated output of 22 MP. The higher output figure doesn’t mean the sensor captures a corresponding amount of extra detail from the film.

    Compare native sensor or hardware figures separately from the output resolution.

  • Treating the SD card as your permanent archive

    A card on its own isn’t a separate backup. The Federal Office for Information Security recommends making regular backups and checking that you can restore your files.

    Transfer your scans to another suitable storage device and check that the files open correctly.

    You’ll also need another storage device and time to transfer and check your files.

  • Assuming the holder or memory card is included

    An optional panoramic holder or an SD card that’s needed but not included can affect your planned scanning workflow.

    Check the film format and the full list of items included against your planned storage workflow.

    Depending on the offer, you may need extra accessories, such as an optional panoramic holder or a compatible SD card.

Key brands at a glance

reflecta

The models covered here suit different workflows: the x33-Scan and x66-Scan save JPEGs directly to an SD card, while the RPS 10S is a PC-based option with DNG output.

  • For the x66-Scan, reflecta lists specific Type 120 sizes from 6 × 4.5 to 6 × 9 cm, as well as Type 127 at 4 × 4 cm.
  • According to reflecta, the x66-Scan’s 22 MP output is interpolated. The manufacturer specifies at least 40 GB of free hard-drive space for the RPS 10S.

Plustek

The OpticFilm 135i is a PC-based scanner for 35 mm film. The OpticFilm 8300i SE is a different model variant with its own software package.

  • Plustek says the OpticFilm 135i supports panoramas with an optional film holder.
  • The panoramic workflow depends on having the right holder. Also check that the requirements for the device and software version on offer are compatible with your computer.

KODAK Photo Plus

The SLIDE N SCAN is described as offering direct SD card storage for Type 135, 110 and 126 negatives.

  • The supplier lists compatible adapters and support for SD and SDHC cards up to 32 GB.
  • According to the supplier, an SD card is required for use but isn’t included. Also check whether the specific supplier delivers to the UK.

Related products on Joybuy

Related products coming soon.

Frequently asked questions

Can I scan landscape negatives without free space on my computer?

With a suitable standalone device, such as the reflecta x33-Scan or x66-Scan, JPEGs are saved directly to an SD card, according to reflecta. This takes care of storage while you capture your scans, but it doesn’t replace a separate backup or the space you’ll need for later editing on your computer.

Will a panoramic negative fit in any 35 mm scanner?

No. Holder compatibility depends on the specific model. Plustek says the OpticFilm 135i supports panoramas with an optional film holder. Check your negative’s dimensions against the scan area and the accessories on offer.

How can I protect files that are initially stored only on an SD card?

Transfer your scans to another suitable storage device and check that you can open them again. The Federal Office for Information Security recommends regular backups and checking that you can restore your files; a single SD card isn’t a substitute for a separate backup.

Which extra items should I check before buying?

Check whether the required SD card and the right film holder are included. For the SLIDE N SCAN, the supplier says the required SD card isn’t included; the panoramic holder for the Plustek OpticFilm 135i is optional. Also compare the contents and software of the specific offer with your planned workflow.