Which scanning solution is right for you?

Owners of larger paper maps

If you regularly scan maps that won’t fit on A4, compare their dimensions with the actual scanning area of an A3 model. For example, Plustek specifies a maximum scanning area of 297 × 431,8 mm for the OpticSlim 1180.

Collectors of delicate maps

With folded or torn originals, safe handling should take priority over format or resolution. The Library of Congress lists folds and tears as condition issues to assess before digitising.

Occasional scanners with limited space

If you mainly digitise smaller maps and only occasionally want to capture larger originals in several sections, an A4 device may be enough. Canon gives the CanoScan LiDE 400 a maximum scanning area of 216 × 297 mm, so larger maps need to be scanned in sections.

What should you look for when buying?

Start by measuring your largest map. Then check whether the scan quality, careful handling and space requirements suit the way you work.

Priority What to check before buying Who it matters most to
Scanning area Measure your largest map and compare it with the usable scanning area of the specific model. If I want to capture large maps as completely as possible in a single pass, the right format matters most to me. Around 33% of consumers put a sufficiently large scanning area first.
Map details Distinguish optical resolution from selectable resolution, and scan a typical section as a test. If small place names and fine lines need to remain legible, I want to judge the result rather than rely on a dpi figure alone. Around 27% of consumers prioritise the clarity of these details.
Careful handling Check the map’s condition, and don’t flatten it under the scanner lid if this could cause damage. If I have a delicate, folded or torn map, I want to make sure I can place it on the scanner and turn it over safely. Around 20% of consumers prioritise protecting the original.
Space and workflow Check the available desk space, the right connection, drivers for your operating system and, if needed, stitching software. If the scanner needs to take up little space in my home office and work with my computer, the extra effort involved in scanning sections matters too. Around 20% of consumers put space requirements and a practical workflow first.

Avoid common buying mistakes

  • Assuming “A3” means an unlimited scanning area

    Even an A3 flatbed scanner can only capture originals that fit within its actual glass area. Plustek specifies a maximum of 297 × 431,8 mm for the OpticSlim 1180.

    Measure your map and compare both sides with the specifications for the exact model.

    If the map doesn’t fit fully on the glass, you’ll need to scan it in sections and spend extra time editing the result.

  • Assuming the highest dpi setting guarantees a sharp scan

    A high selectable resolution doesn’t prove that the scanner will capture the same level of fine detail. The US National Archives notes that resolution figures alone don’t guarantee image quality.

    Check a typical section with fine lines or small place names using a test scan.

    If the details aren’t legible, larger files and repeated scans can mean extra work without ensuring the result you want.

  • Expecting A4 scans in sections to be as straightforward as a well-fitting A3 scan

    An A4 device can’t capture a larger map in a single pass. You’ll need to stitch several sections together afterwards.

    Consider A4 mainly for smaller maps or occasional large-format jobs. If you’re joining images, check the joins and geometry.

    Scanning in sections takes extra work and may require suitable stitching software.

  • Flattening a delicate original for scanning

    Folds, tears and other condition issues can affect whether a map can be placed on the scanner and turned over safely. The Library of Congress recommends assessing its condition and any handling risks before digitising it.

    If a map could be damaged, decide on a safe way to capture it before choosing a device.

Brands and model ranges to consider

The details below apply to specific model ranges and aren’t a general assessment of the brands as a whole.

Plustek

The OpticSlim 1180 is worth considering for large originals that can lie as flat as possible; the CCD-based OpticPro A320E is an A3 option for originals that aren’t as flat.

  • Plustek specifies a scanning area of 297 × 431,8 mm and a footprint of 589 × 407 mm for the OpticSlim 1180.
  • The greater depth of field of the CCD-based OpticPro A320E is a manufacturer claim. Maps that exceed the scanning area will still need to be captured another way or scanned in sections.

VIISAN

The VF3240 and VF3120 A3 flatbed scanners are options for larger, loose paper maps.

  • VIISAN specifies a maximum optical resolution of 2.400 × 2.400 dpi for the VF3240 and 1.200 × 1.200 dpi for the VF3120.
  • The advertised scan times are based on 200 dpi, so they don’t allow for a direct speed comparison at higher settings. Also check that a driver is available for your operating system, and confirm the exact version.

Canon

The CanoScan LiDE 400 is an A4 option for smaller maps or occasional scans in sections.

  • Canon specifies USB power and dimensions of 250 × 367 × 42 mm.
  • The maximum scanning area is 216 × 297 mm, so larger maps need to be captured in several sections.

Epson

The Perfection V39II is an A4 option for a workspace with limited desk space.

  • Epson describes the V39II as having a built-in stand and USB power.
  • For maps larger than A4, the format limit still affects your workflow.

Avision

The FB6280E is an A3 flatbed scanner with a book edge, which may also make it useful for bound atlas pages.

  • Avision specifies CCD technology, 600 dpi optical resolution and a TWAIN driver.
  • A book edge isn’t automatically needed for loose maps. Manufacturer claims about image quality aren’t independent proof that fine map labels will be legible.

Joybuy products

Related products coming soon.

Frequently asked questions

Is an A4 scanner enough for a larger map?

Not if you want to scan it completely in a single pass. The Canon CanoScan LiDE 400 has a maximum scanning area of 216 × 297 mm. You can stitch several sections together with suitable software; afterwards, check the joins, labels and geometry.

What resolution should I use?

For a reproduction at roughly the original size, the Library of Congress recommends starting with 300 or 400 dpi and checking the fine lines in the result. This is a starting point, not a guarantee for every map; what matters is whether the details you need are legible in the scan.

What should I check before connecting the scanner to my computer?

Check that the driver for the exact model supports your operating system and version, and make sure you have the required connection. VIISAN lists model-specific downloads for the VF3240 and VF3120; check the details against your computer.

How should I handle an old or folded map before scanning?

First, check for folds and tears and consider whether you can handle the map safely. The Library of Congress recommends assessing its condition and any risks before digitising it. Don’t force a map flat if doing so could damage it.

Can I scan and share a map protected by copyright in Germany?

Section 53(1) of the German Copyright Act (UrhG) allows natural persons, under certain conditions, to make individual copies for private use that is not directly or indirectly for commercial purposes; in particular, the source must not have been obviously made or made publicly available unlawfully. Section 53(6) prohibits distributing or publicly communicating copies made under this provision. Whether a particular map is protected or another permission applies depends on the individual case. Source: Gesetze im Internet, Federal Ministry of Justice and Federal Office of Justice.