For a few loose school certificates, an A4 flatbed scanner is usually the obvious choice. A book or overhead scanner is better suited to bound pages or documents that cannot be laid flat. If you have lots of loose sheets that are suitable for feeding, a duplex document feeder can save you from placing each one on the scanner individually, provided the paper size and condition are compatible. For application documents, it’s also important to make sure scans are complete and legible, and to follow the requirements of the organisation receiving them.
Which type is right for you?
If you have a few original certificates
If you want to scan a few loose certificates without using a paper feeder, a flatbed scanner is a good choice. Canon Germany lists an A4 scanning area for the CanoScan LiDE 400, while Epson Germany describes the Perfection V39II as an A4 flatbed scanner too.
If you have bound documents
If your certificates are in a folder or alongside book pages, a book or overhead scanner can save you from having to place them on a glass scanning bed. CZUR describes its ET series as suitable for bound documents, while Plustek describes the OpticBook 4800 as a flatbed book scanner.
If you have lots of loose documents
If you regularly scan stacks of suitable individual sheets on both sides, a duplex feeder can make the process easier. Brother lists an automatic 20-sheet feeder and duplex scanning for the ADS-1800W.
What to look for when buying
First, decide whether your certificates are loose or bound. A feeder is mainly worth considering if you regularly scan lots of individual sheets that are suitable for feeding.
| Priority |
What to check before buying |
Who it matters most to |
| Loose originals without a feeder |
Compare the scanning area with the actual size of your documents. Canon Germany states that the Canon CanoScan LiDE 400 has a maximum scanning area of 216 × 297 mm. |
If I’d rather place individual, delicate certificates on the scanner than feed them through, the scanning area needs to be right for me. Consumers whose main priority is handling loose originals are likely to account for around 29%. |
| Bound documents |
Check the binding, document size and space required to set up the scanner. CZUR states that its ET series can scan documents up to A3 without touching them. |
If my certificates are bound, I want to scan them without having to remove them from the binding. Consumers whose main priority is scanning bound documents are likely to account for around 22%. |
| Application documents |
Check the scan for completeness, text, margins and, if relevant, the reverse side. The required file format and size depend on the organisation receiving it. |
If I’m submitting certificates digitally with an application, all the information needs to be legible and the files complete. Consumers who particularly value application-ready files are likely to account for around 21%. |
| Stacks and duplex scanning |
Check the feeder, duplex function, and the size and condition of the sheets. Brother lists a 20-sheet feeder and a paper weight range of 51,8–128 g/m² for stack and long paper on the ADS-1800W. |
If I often scan lots of loose sheets, I want to capture both sides without having to turn over each sheet individually. Consumers whose main priority is processing stacks are likely to account for around 14%. |
| Local storage |
Check that your computer, connection and preferred storage method are compatible with the model, then back up important files. The Federal Office for Information Security recommends making backup copies and provides guidance on encrypting storage media. |
If I want to save certificate files on my own device, I look for a suitable local workflow and make a backup copy. Consumers whose main priority is local storage are likely to account for around 14%. |
Common buying mistakes
-
Buying a book scanner when you’ll mostly scan loose A4 certificates
Book and overhead scanners are designed for bound documents. For loose sheets, an A4 flatbed scanner may be the simpler option.
Before you buy, count your loose and bound documents and compare their dimensions with the scanner’s scanning area.
-
Assuming a resolution figure guarantees legible certificates
Resolution alone doesn’t tell you whether a particular scan is complete, correctly aligned or suitable for the upload you have in mind.
Scan a representative document and check the margins, text, reverse side and file size.
-
Planning to use a feeder for bound or unsuitable originals
A document feeder is designed for suitable loose paper; bound pages need to be scanned differently.
Check the size and condition of each original, and only use the feeder if the sheet meets the stated media requirements.
-
Assuming a scan is the same as an officially certified copy
According to the Federal Portal, the relevant authority in Bremen certifies that a copy matches the original; scanning alone does not provide this certification.
Ask the school, university or authority concerned whether a standard upload is enough or a certified copy is required, and keep the original available.
Scanner brands to consider
Canon
The CanoScan LiDE 400 is an A4 flatbed scanner for individual documents in a home office.
- Canon Germany lists a scanning area of 216 × 297 mm, USB power and PDF buttons.
- With a flatbed scanner, you place each document on the scanner individually; an automatic document feeder is not listed for this model.
Epson
The Perfection V39II is an A4 flatbed scanner with an integrated stand.
- Epson lists USB operation, 4.800 dpi and text enhancement in ScanSmart.
- These manufacturer specifications don’t guarantee a particular level of legibility for individual certificates.
CZUR
The ET series is designed for bound documents, while CZUR says the Shine800 Pro is intended for flat, individual sheets.
- CZUR lists contactless scanning up to A3 and curve flattening for the ET series. For the Shine800 Pro, it lists 8 MP and 270 dpi.
- CZUR says the Shine800 Pro isn’t designed as a book scanner, so the two product ranges aren’t interchangeable.
Brother
The ADS-1800W is a compact duplex document feeder scanner for regularly scanning stacks of loose documents.
- Brother Germany lists an automatic 20-sheet feeder and duplex scanning.
- Bound originals, or documents that aren’t suitable for feeding, need to be scanned another way.
Plustek
Plustek describes the OpticBook 4800 as a flatbed book scanner for bound pages.
- The manufacturer lists a 2-mm book edge and the ability to create searchable PDFs.
- These product specifications come from the US manufacturer’s website and don’t confirm availability or specifications in Germany.
Suitable products at Joybuy
Suitable products coming soon.
Frequently asked questions
Is a scan I’ve made myself enough to count as a certified school certificate?
No. Official certification confirms that a copy matches the original; a scanner can’t provide this. The organisation receiving your application decides whether a standard upload is enough or a certified copy is required. The Federal Portal describes a regional service for this in Bremen.
Which file format should I choose for a digital application?
First, check the requirements for the application route you’re using. In its JOBBÖRSE help section, the Federal Employment Agency recommends PDF and sets a total limit of 3 MB for that portal. This limit doesn’t automatically apply to other submissions.
Which software and connections should I check before buying?
Check that the drivers and software work with your operating system, and find out which connection the scanner needs. Canon provides model-specific drivers and software for the LiDE 400; for other models, check the relevant manufacturer’s specifications.
How should I store digital certificates after scanning them?
Check the saved file and make an extra backup of important documents. The Federal Office for Information Security recommends making backup copies and provides guidance on encrypting storage media.