Which setup is right for you?

People comparing finished recordings

If you listen to several files in the same place, don’t confuse perceived loudness with peak level. The EBU recommends measuring programme loudness; for matching levels, you may need software such as the Loudness Normalizer described by Steinberg.

People who take turns recording

If you share a microphone and workspace, you need a clear way to set the input level for each new take. Focusrite describes features such as Auto Gain and Clip Safe for the Scarlett 2i2 4th Gen, while MOTU says the M2 displays input and output levels on the unit.

Teams listening together

If two people want to listen on their own headphones during a session, separate sockets and controls are important. Solid State Logic says the SSL 2+ MKII has two independent headphone outputs with separate volume controls.

What should you look for when buying?

For finished files, the EBU recommends measuring programme loudness; Steinberg describes normalisation as software analysis followed by processing. Interface meters show signal levels in the recording and monitoring paths, but don’t match the levels of saved files.

What you need What to check Who is this important to?
Compare finished files Check whether your audio software can measure programme loudness and normalise it if needed. A hardware meter can’t replace this file-level comparison. When I compare finished recordings, perceived loudness matters to me, not just peak level. Around 40% of consumers put loudness matching for finished files first.
Set levels for new takes Look for easy-to-read input meters and controls that let you adjust the gain for each source. When different voices or instruments are recorded at a shared workstation, I want to be able to set the input level clearly for each take. Around 30% of consumers prioritise setting levels for new recordings.
Listen together Check how many physical headphone sockets there are and whether each output has its own volume control. When we listen together, I want to be able to adjust our headphone levels independently. Around 20% of consumers put shared headphone monitoring first.
Connect more sources later Count the microphone and line sources you need to connect at the same time, and check whether an ADAT converter is included or planned. If I want to expand the recording setup later, I need to plan for the additional hardware required. Around 10% of consumers prioritise expanding the number of inputs later.

Common misconceptions

  • Assuming the same peak level means the same perceived loudness

    Similar peak levels don’t necessarily mean that two finished recordings will sound equally loud. The EBU recommends measuring programme loudness; peak-only normalisation can leave differences in loudness intact.

    Compare finished files using loudness metering in your software, and use the interface display to monitor the signal path.

  • Counting two headphone sockets as extra recording inputs

    According to Solid State Logic, the SSL 2+ MKII has two recording input channels and two independently controlled headphone outputs. The outputs don’t increase the number of sources you can record.

    List the sources you’ll record simultaneously and the people who’ll be listening at the same time separately before comparing connections.

  • Assuming ADAT expansion gives you microphone inputs straight away

    According to Audient, the Audient iD14 MKII has two microphone preamps and an optical ADAT input. You’ll need compatible external hardware to use additional ADAT channels. Audient also specifies a minimum USB power supply requirement of 0.9 A at 5 V from a USB 3.0 port.

    Allow for the additional hardware and check the connection on your computer before counting the expanded setup as available recording capacity.

    ADAT expansion may require a compatible additional device.

Key brands to consider

MOTU

The MOTU M2 is worth considering if you want to see input and output levels directly on the unit.

  • MOTU lists LCD meters for the M2’s inputs and outputs, as well as two combination microphone, line and instrument inputs.
  • The functions described don’t match the perceived loudness of finished files. The M2 has one headphone output.

Focusrite

The Scarlett 2i2 4th Gen is worth considering if people take turns recording and need help setting gain, along with an adjustable direct monitor mix.

  • Focusrite describes Auto Gain, Clip Safe and a direct monitor mix adjustable in Focusrite Control 2 for this model.
  • Focusrite says the mixer faders don’t affect the sources currently being recorded. The 48 V phantom power is switched on for both microphone inputs together.

Solid State Logic

The SSL 2+ MKII is worth considering if two people want to listen at the same time using independently controlled headphones.

  • Solid State Logic lists two independent headphone outputs with separate controls, as well as a monitor mix control.
  • According to the manufacturer, this model has two recording input channels; extra headphone outputs aren’t extra microphone inputs.

Audient

The Audient iD14 MKII is worth considering if you’re thinking of expanding beyond your current two-channel setup via ADAT later on.

  • Audient lists two microphone preamps, an ADAT input, a monitor mix and two headphone sockets.
  • The additional ADAT inputs require compatible external hardware. Audient specifies at least 0.9 A at 5 V from a USB 3.0 port for bus power.

Audio interfaces to consider

Suitable products coming soon.

Frequently asked questions

Is an audio interface’s level meter enough to make finished recordings sound equally loud?

No. You need to measure programme loudness to compare it; Steinberg describes loudness normalisation as software analysis followed by processing. The EBU recommends measuring programme loudness, not using a particular hardware meter.

Why does the microphone input sound louder or quieter in my headphones even though the recording hasn’t changed?

With the Scarlett 2i2 4th Gen’s direct monitor mix, Focusrite says the mixer faders control the monitor path and don’t affect the sources currently being recorded. So check the input gain and monitor mix separately.

What should I check when connecting a second pair of headphones?

If both people want to adjust their levels independently, check that there are two physical sockets and separate level controls. According to Solid State Logic, the SSL 2+ MKII has these connections; they don’t provide any additional recording inputs.

What marking should I look for on a new audio interface in Germany?

According to guidance from the German Federal Network Agency, a new electrical or electronic device covered by the rules may only be offered for sale in Germany once the retailer has checked, among other things, that it has the correct CE marking, manufacturer details and a unique device identification. The Agency also specifies German-language instructions for devices supplied to non-commercial users. Requirements depend on the specific product listing.

Who should I contact if a newly purchased interface is faulty?

Your statutory consumer rights generally apply against the seller and are separate from any voluntary guarantee. In its September 2026 guidance, the Verbraucherzentrale explains that retailers are responsible for newly purchased goods for two years and lists repair or replacement as remedies. The rights available in an individual case depend on the circumstances.