Which scanning method is right for you?

Collectors of bound sheet music

If you scan volumes of scores or delicate manuscripts, a suitably sized flatbed is important. Check that its usable area can accommodate the whole page.

People with large sheet music

For large originals, the key is the scan size the device actually supports. Also consider whether your pages are loose or bound in a book.

People digitising loose parts

If you want to scan lots of individual pages and print them at home, an automatic document feeder and the cost of consumables may influence your choice.

What should you look for when buying?

Bound or delicate originals

A good fit if: you want to scan books, bound parts or individual delicate sheets on the flatbed.

The trade-off: You need to position each page individually, and the whole original must fit on the usable glass area.

Large, loose sheets of music

A good fit if: you regularly want to scan loose originals up to the large format you need.

The trade-off: A3 printing, A3 scanning through the feeder and an A3 flatbed are different features.

Lots of loose pages up to A4

A good fit if: most of your originals are loose and no larger than the A4 scan size you need.

The trade-off: An ADF makes it easier to scan suitable loose sheets, but it cannot replace a flatbed for bound originals.

Your priority What to check before buying Who values this?
Bound and delicate originals Compare the flatbed’s usable area with the largest bound page you need to scan. If I scan delicate sheet music, I want to be able to place it on the flatbed rather than feed it through a document feeder. That’s why around 36% of consumers put a suitable flatbed first.
Large sheets of music Check the print size, flatbed scan size and ADF scan size separately. When scanning large sheets of music, I want to capture the whole original without splitting it up. Around 29% of consumers therefore prioritise the large format the scanner actually supports.
Lots of loose pages Check the ADF capacity, supported original size and whether you need single- or double-sided scanning. If I digitise lots of suitable loose sheets, I want to avoid placing them on the scanner one by one. That’s why around 21% of consumers pay particular attention to the document feeder.
Printing and maintenance costs Compare consumables and maintenance costs against your own printing volume. For regular printing, I want to estimate the ongoing costs based on how much I print. Around 14% of consumers put this first.

Pitfalls when buying a sheet music scanner

  • Assuming ‘prints A3’ means ‘scans bound A3 pages on the flatbed’

    Print size, ADF size and usable flatbed area answer different questions. An A3 print specification alone does not tell you whether a bound A3 page can be scanned in full on the glass.

    Measure your largest original and check the usable glass area and feeder scan size for the exact model.

    If you have to scan a page in sections, it can take more time. Some originals may require a different scanner.

  • Assuming the document feeder is suitable for every sheet music original

    An ADF is designed for suitable loose sheets. Its benefits do not automatically extend to bound or delicate originals.

    For books and delicate originals, plan to use a suitable flatbed and check that the whole page will fit on the glass.

  • Assuming protected sheet music qualifies for a private-copying exception

    Section 53(4) of the German Copyright Act (UrhG) places a specific restriction on the reproduction of graphic musical works. According to the Federal Ministry of Justice and the Federal Office of Justice, reproduction is generally permitted only with permission or under the exceptions set out in the law.

    Before reproducing someone else’s protected sheet music, check the rights, any existing licence and the applicable legal exceptions.

  • Treating your scanner choice and cost per print as the same decision

    A device may suit your originals, while its printing system may require a separate assessment based on your actual printing volume.

    First work out which scanning method is right for you, then compare ongoing printing costs on the same basis of use.

Brands and suitable product ranges

Epson

The WorkForce WF-7830DTWF is worth considering for A3 scans of loose originals; A3+ is listed as a print size for the EcoTank ET-8550. Epson points out that the A3+ print specification does not confirm an A3 flatbed scan area.

  • Epson lists a 50-sheet A3 ADF for the WF-7830DTWF.
  • The ET-8550 is specified as supporting A3+ printing.
  • The WF-7830DTWF’s ADF specification does not confirm a usable A3 flatbed area for bound originals.

Brother

The MFC-J6955DW is listed for A3 printing and scanning; the DCP-L2620DW is a monochrome laser alternative for a different printing profile. These specifications apply to the individual models, not the entire range.

  • Brother lists A3 scanning and an A3 duplex ADF for the MFC-J6955DW.
  • The A3 ADF specification alone does not confirm an A3 flatbed area.
  • The DCP-L2620DW prints in black and white only.

Canon

The MAXIFY GX7150 is described as an A4-focused all-in-one ink tank printer with a duplex ADF.

  • Canon lists a 50-sheet duplex ADF and refillable ink tanks.
  • For large sheet music, check the scan size the device actually supports. The manufacturer’s claims about printing costs are not independent evidence of what it will cost you to run.

HP

The Smart Tank 7605 is described as an A4 ink tank printer with an ADF for loose documents.

  • HP lists scanning, faxing and an ADF; A4 is specified as the paper size.
  • The manufacturer’s information about the supplied ink does not show whether this model will be cost-effective for your personal printing volume.

Joybuy products for scanning at home

The following Joybuy all-in-one printers have been selected for scanning at home. Depending on the model, the focus is on the flatbed or on feeding loose pages; check that the device supports the original size you need.

PANTUM BM2300AW A4 Mono Laser Multifunction Printer

PANTUM BM2300AW A4 Mono Laser Multifunction Printer

With an ADF, this printer may suit suitable loose pages. The feeder cannot replace a flatbed of the right size for bound sheet music.

A4 mono laser all-in-one printer; 22 ppm; Wi-Fi; ADF.

View at Joybuy
PANTUM BM2300NW A4 Mono Laser Multifunction Printer

PANTUM BM2300NW A4 Mono Laser Multifunction Printer

For scanning at home, check before buying that the scan area and supported original size are suitable for your sheet music.

A4 mono laser all-in-one printer; 22 ppm; dual-band Wi-Fi; Ethernet.

View at Joybuy
HP Envy 6520 All-in-One Wireless Inkjet Printer

HP Envy 6520 All-in-One Wireless Inkjet Printer

If you have lots of loose pages, the document feeder is useful for scanning multiple pages. Check which original size the exact model supports.

Wireless all-in-one inkjet printer.

View at Joybuy
HP Envy 6120 All-in-One Wireless Inkjet Printer

HP Envy 6120 All-in-One Wireless Inkjet Printer

A suitably sized flatbed is important for bound or delicate originals. Before buying, compare the usable area with the largest page you need to scan.

Wireless all-in-one inkjet printer.

View at Joybuy

Frequently asked questions

Can I simply scan sheet music I’ve bought and that’s protected by copyright at home?

No, not simply because the scan is for personal use. Section 53(4) of the German Copyright Act (UrhG) expressly restricts the reproduction of graphic musical works. Except for copying by hand, reproduction is generally allowed only with the rights holder’s permission or under the exceptions set out in the law. The Federal Ministry of Justice and the Federal Office of Justice list, among other things, the statutory conditions for works that have been out of print for at least two years. Check the rights before scanning someone else’s protected sheet music; works of your own and public-domain material should be considered separately under the relevant rules.

Can an A3 printer automatically scan a bound A3 sheet music book?

No. The stated print size does not tell you that. Even a listed A3 ADF is intended for suitable loose originals; for a bound book, you need a flatbed that is specifically large enough.

How do I set up scans so I can edit the sheet music later?

An image scan alone does not produce an editable score. You’ll need separate music recognition software, known as Optical Music Recognition (OMR). The Audiveris documentation recommends greyscale images for its OMR process and describes converting scanned sheet music into MusicXML. This recommendation applies to that software workflow and is not a guaranteed printer feature.

What should I check after buying, including drivers and ongoing costs?

Check the support page for your exact model to make sure compatible drivers are available for your computer, and compare the specific ink, toner or maintenance supplies before buying. The stated yield of a consumable does not tell you how many of your own sheet music prints you’ll get from it.