Which pedals are right for you?

Drivers practising their braking points

If you drive the same corners repeatedly, you’ll want to fine-tune your braking pressure and pedal feel. Also check that your setup can handle the force applied when braking.

Drivers without a permanent rig

If you race at a desk or put your pedals away after each session, look for suitable support, a comfortable seating position and a braking resistance that works with your setup.

Drivers with an existing wheelbase

If you want to keep using your wheel or console, check the entire connection setup, including any adapters needed for your specific equipment.

What should you look for when buying?

First, check how your setup is mounted and connected. Then choose the brake feel, number of pedals and upgrade options that suit your practice goals.

Priority What to look for when buying Who is it important to?
Modulating your braking Check the sensor type, adjustable resistance and calibration options for the specific model. Thrustmaster lists adjustable springs for the T-LCM. When I drive the same corners repeatedly, I want to control my braking pressure and adjust the resistance to suit me. Around 33% of consumers say braking control is their top priority.
Stability and seating position Check the mounting, the stability of your seat and pedal plate, and whether the spacing and angles can be adjusted. Thrustmaster describes adjustable pedal positions for the T-LCM; Heusinkveld requires a very rigid base for the Sprint. During long sessions, I want to position my seat and pedals so nothing shifts when I brake. Around 27% of consumers say stability and seating position are their top priorities.
Connecting to existing equipment Check the pedal model, wheelbase, platform and any required cables or accessories as one complete connection setup. Thrustmaster says the T-LCM connects to consoles via RJ12 through a Thrustmaster wheelbase; direct USB is listed as a PC connection. If I want to keep my wheelbase or console, the connection needs to work with my existing system. Around 20% of consumers prioritise continuing to use their existing equipment.
Total cost and upgrade options Compare what’s included in the box, not just the product range, and budget separately for any kits, adapters and pedal mounting hardware you need. Fanatec lists load-cell and clutch kits for the CSL Pedals as sold separately. If I want to build up the features over time, I want to plan for any extra parts and mounting requirements in advance. Around 20% of consumers say total cost and upgrade options are their main priorities.

Common buying mistakes

  • Assuming SR-P and SR-P Lite are the same because their names are similar

    MOZA distinguishes between the product ranges: the SR-P base set is not compatible with the SR-P Lite clutch or SR-P Lite brake kit.

    Before choosing accessories, compare the full pedal name and what’s included with the manufacturer’s specifications.

  • Choosing a load-cell brake without checking the mounting

    Heusinkveld requires a very rigid pedal base for the Sprint. A sensor type alone won’t tell you whether your seat and pedal plate will stay stable when you brake.

    Check your seat and pedal mounting first, then choose the braking resistance you want.

  • Confusing PC USB with direct console compatibility

    Thrustmaster recommends connecting T-LCM pedals to consoles via RJ12 through a Thrustmaster wheelbase. Direct USB is described as a PC connection.

    Before buying, check the complete connection setup for your platform and wheelbase.

  • Comparing a base set with an upgraded version

    The load-cell brake and clutch aren’t included in the Fanatec CSL base set.

    Compare the features actually included and check which accessories you’ll need for your setup.

Key brands and product ranges

Fanatec

The CSL Pedals are an upgradeable base set for a compatible Fanatec wheelbase. With an additional component, they can also work as a standalone PC USB device.

  • Fanatec lists adjustable pedal spacing and pedal plates.
  • The load-cell brake, clutch and, where needed, USB connection must be checked or purchased separately.

Thrustmaster

The T-LCM is a three-pedal set with a load-cell brake. The key thing is to check that the connection setup works with your PC or console system.

  • Thrustmaster lists adjustable springs and pedal positions.
  • For consoles, the manufacturer recommends connecting via RJ12 through a Thrustmaster wheelbase; direct USB isn’t listed as a connection option for consoles.

MOZA Racing

The SR-P is a two-pedal load-cell set with a direct USB connection to a PC. The SRP2 is a separate product range.

  • MOZA lists an adjustable pedal layout for the SR-P.
  • The SR-P base set doesn’t include a clutch and isn’t compatible with the SR-P Lite clutch or SR-P Lite brake kit.

Logitech G

The PRO Racing Pedals are designed for drivers looking for a three-piece load-cell set that connects to their existing Logitech equipment.

  • Logitech lists replaceable springs and elastomers, as well as pedal modules that can be adjusted horizontally.
  • Some setups require a separate Racing Adapter. Logitech notes that using one may limit game compatibility.

Heusinkveld

The Sprint is an option for a fixed PC rig if you want adjustable brake feel and software profiles.

  • The manufacturer’s documentation describes adjustable pedal angles and resistance, as well as SmartControl.
  • Heusinkveld requires a very rigid pedal base. A clutch is only included in the three-pedal set.

Pedals on Joybuy

Related products coming soon.

Frequently asked questions

Can I connect T-LCM pedals directly to a console via USB?

No. Thrustmaster recommends connecting T-LCM pedals to consoles via RJ12 through a Thrustmaster wheelbase; direct USB is described as a PC option.

What should I do after changing the T-LCM brake springs?

Then adjust the braking resistance using the PC calibration software. Thrustmaster says you can adjust settings such as electronic braking force there, and the settings are saved to the pedal set.

Do I need a pedal plate for the Heusinkveld Sprint?

You need a very rigid base, but not necessarily a specific pedal plate. Heusinkveld describes mounting the Sprint with screws to the Sprint Baseplate or another very rigid base. So check that your existing plate is rigid enough and securely mounted.