Which pedals are right for you?

Drivers working on consistent braking

You practise braking at the same points again and again, and want to adjust braking force and pedal feel rather than focusing solely on the highest possible sensor rating. Fanatec, Thrustmaster and Heusinkveld provide details of different adjustment options and braking systems.

Cockpit and ergonomics planners

You’re setting up a permanent training space and want to plan pedal position, seating position and a mounting solution suited to the braking force. Thrustmaster describes adjustable pedal positions, while Heusinkveld requires a very rigid mounting base for the Sprint.

Setup upgraders

You want to connect your pedals to your existing wheelbase or console, or add a clutch and other modules later. Fanatec and Thrustmaster specify platform-specific connection requirements, while SIMAGIC describes different P1000 variants and optional upgrades.

What to look for when buying

For a permanent training setup, the main things to consider are adjustable brake feel, stable mounting, the right connection and what’s actually included in the box.

What matters to you What to look for Who should pay particular attention?
Consistent braking feel Check the calibration and mechanical adjustment options. For the Heusinkveld Sprint, distinguish between the 120 kg sensor rating and the maximum actual braking force of 65 kg. If I want to hit the same braking points over long stints, I need to be able to adjust pedal resistance in a controlled way rather than simply looking for a high sensor rating. Around 36% of consumers put consistent braking first.
Mounting and pedal position Check that the mounting points and pedal plate rigidity match the manufacturer’s specifications. Heusinkveld requires a very rigid base for the Sprint; Thrustmaster specifies adjustable pedal positions on the T-LCM. For a fixed cockpit, I want to plan my seating position, pedal angle and a sufficiently rigid plate together. This combination is the most important buying consideration for around 29% of consumers.
Platform connection Check the pedal version, target platform, wheelbase and connection method together. For console use with the T-LCM, Thrustmaster specifies an RJ12 connection to a Thrustmaster wheelbase; Fanatec makes console use of the CSL Pedals dependent on compatible hardware. If I need to connect the pedals to my existing PC or console setup, I want to check the connection method before buying. Around 21% of consumers prioritise platform connectivity.
Expandability and what’s included Check the number of pedals and included parts for the exact variant. According to SIMAGIC, some optional P1000 modules require an additional P-APS power supply. If I want to start with just an accelerator and brake, or add a clutch and modules later, the contents need to match my upgrade plans. Around 14% of consumers put expandability first.

Common misconceptions

  • Assuming the sensor’s kilogram rating is the foot force required

    According to the manufacturer, the Heusinkveld Sprint’s sensor is rated at 120 kg, while its maximum actual braking force is 65 kg. The sensor rating alone therefore doesn’t let you directly compare the force required to operate different pedals.

    Compare the sensor rating, adjustable brake resistance and actual operating force separately, using the specifications for each model.

  • Choosing a stiff brake pedal without a suitable pedal plate

    Heusinkveld requires a very rigid mounting base for the Sprint. Simply calling a setup a ‘cockpit’ doesn’t tell you whether its existing construction is suitable.

    Check the fitting instructions and mounting points against your rig, and make sure the pedal plate is sufficiently rigid.

  • Assuming a USB connection or platform logo means it works directly with a console

    For console use with the T-LCM, Thrustmaster specifies an RJ12 connection to a Thrustmaster wheelbase; the direct USB connection is intended for PC.

    Check the full connection chain — pedals, cable, wheelbase and platform — against the manufacturer’s specifications.

  • Assuming every modular set comes with the same accessories

    SIMAGIC offers different versions and optional upgrades in the P1000 range. The MOZA CRP2, in the version described, is a two-pedal set with an accelerator and brake; the clutch is optional.

    Make a note of the exact model name and what’s included before comparing offers.

Key brands at a glance

Fanatec

The CSL Pedals LC are a three-pedal bundle with a load-cell brake and connection options within the Fanatec ecosystem.

  • Fanatec says brake force sensitivity and pedal axes can be adjusted; PC use via USB is possible with the Load Cell Kit.
  • Console use requires a compatible wheelbase; Xbox use also requires a compatible steering wheel.

Thrustmaster

The T-LCM is a three-pedal set with a load-cell brake and interchangeable springs for fine-tuning.

  • Thrustmaster specifies up to 100 kg of pressure on the sensor and adjustable pedal positions.
  • For console use, the documented connection is via RJ12 to a Thrustmaster wheelbase; a direct USB connection is possible on a Windows PC.

Heusinkveld

The Sprint is a PC pedal set whose manufacturer describes mechanical and software adjustments for use with a rigid rig.

  • Heusinkveld distinguishes between a 120 kg load-cell sensor and a maximum actual braking force of 65 kg.
  • The manufacturer requires a very rigid mounting base, so check your existing pedal plate.

SIMAGIC

According to SIMAGIC, the P1000 range includes standard, inverted and hydraulic versions, as well as optional upgrades.

  • SIMAGIC describes different configurations, including the hydraulic P1000-FRS.
  • Optional components aren’t automatically included with every version; according to the manufacturer, some upgrades require an additional P-APS power supply.

MOZA Racing

The CRP2 version covered here is a two-pedal set with an accelerator and brake, for buyers who want to try different brake settings.

  • MOZA specifies a 200 kg load-cell sensor and tool-free adjustment options.
  • The sensor rating alone doesn’t indicate the foot force required or guarantee faster lap times; the clutch is optional.

Joybuy products

Related products will be available soon.

Frequently asked questions

Can I connect a USB pedal set directly to my console?

A USB connection alone doesn’t make a pedal set suitable for console use. For console use with the T-LCM, Thrustmaster specifies an RJ12 connection to a Thrustmaster wheelbase; Fanatec also makes console use of the CSL Pedals dependent on specific wheelbase or steering wheel combinations. Check the exact combination before buying.

How do I connect the pedals and adjust the brake?

According to Thrustmaster, use either the designated USB connection on PC or the RJ12 connection to the wheelbase with the T-LCM, but not both at the same time. Fanatec also warns against connecting the CSL Load Cell Kit via RJ12 and USB simultaneously. Then use the calibration for your model to set the brake to a level you can control comfortably.

What extra parts should I check for my fixed rig?

Check that your pedal plate is sufficiently rigid and whether you need a compatible wheelbase for the connection you want. Heusinkveld requires a very rigid base for the Sprint; some optional SIMAGIC P1000 modules also require an additional power supply.

What should I know about faults and end-of-life electronic pedals?

For a consumer purchase from a retailer in the EU, the statutory minimum guarantee is generally two years from receipt of the goods; a voluntary manufacturer’s warranty cannot limit these rights. The European Union explains these consumer rights on its ‘Your Europe’ portal. End-of-life electrical equipment is collected separately; the German Environment Agency notes that municipal collection points are generally free of charge.