Which pedal setups are right for you?

Oval racing beginners at a desk

If you want to do longer practice sessions without a dedicated rig, look for a stable setup, the right connection and the option to upgrade later. Fanatec says the CSL Pedals can be securely mounted or braced against a hard surface.

Drivers focused on consistent braking

If you’re practising repeatable braking inputs and can secure your pedals and seat, compare the brake resistance, calibration and connection. Thrustmaster describes different spring options for the T-LCM, while MOZA says the SRP2 has adjustable pedal positions.

Endurance practice on a fixed rig

If you want to fine-tune the throttle feel, pedal spacing and foot position over longer sessions, you’ll need a suitable mounting base. Logitech G describes its pedal modules as adjustable, while Heusinkveld requires a very rigid base for the Sprint.

What matters for oval practice?

Basic set that measures pedal position

A good fit if: you’re starting out by practising throttle and brake inputs at a desk with a stable setup, and already have a suitable Fanatec base or plan to upgrade later.

Keep in mind: The CSL basic set measures pedal position; a load-cell brake isn’t included as standard.

Adjustable load-cell set

A good fit if: you can practise repeatable braking inputs and securely mount your pedals and seat.

Keep in mind: The connection method varies by model and platform. According to Thrustmaster, using the T-LCM with a console requires a Thrustmaster wheel base.

Adjustable set for a fixed rig

A good fit if: you want to adjust pedal spacing, angle or resistance to suit your setup during longer sessions.

Keep in mind: Heusinkveld requires a very rigid mounting base for the Sprint. This requirement doesn’t necessarily apply to other pedal sets.

What you need What to check before buying Who is this important to?
Repeatable braking pressure Compare the sensor type, adjustable brake resistance and mounting options for the specific model. If I want to practise repeatable inputs when braking, I want to be able to adjust the brake resistance to suit me. Around 33% of consumers put repeatable braking inputs first.
Throttle control on corner exit Check whether the throttle resistance and pedal spacing can be adjusted. When accelerating out of an oval corner, I want to apply the throttle smoothly and adjust my foot position to suit me. Around 27% of consumers prioritise throttle control on corner exit.
Stable setup and pedal position Check the mounting options and make sure your setup has enough room for your seat and feet. For a long session, I want to secure my pedals and seat so that slipping doesn’t affect my foot position. Around 20% of consumers prioritise a stable setup and suitable pedal position.
Connection and upgrade options Check the pedal model, platform, wheel base, cables and any required upgrades together. If I want to keep using my existing hardware or upgrade later, the connection needs to work with my system. Around 20% of consumers prioritise connection and upgrade options.

Common misconceptions when buying pedals

  • Assuming a high sensor rating gives you a training advantage

    Manufacturer specifications may refer to different measurements and designs. A sensor reading doesn’t prove that you’ll gain lap time or that the pedal will be securely mounted in your setup.

    Try out the adjustable brake feel in your own setup, then calibrate the input in the game you’re using.

  • Assuming the CSL basic set can be upgraded

    The CSL basic set doesn’t have a load-cell brake. Fanatec sells the Load Cell Kit and USB adapter separately for the relevant connection setups.

    Before buying, check the exact set name and the connection method you’ll need.

  • Assuming PC USB means a direct console connection

    For the T-LCM, Thrustmaster distinguishes between a direct USB connection to a PC and a console connection via RJ12 to a Thrustmaster wheel base.

    Check the pedals, platform, wheel base and cables as one complete connection setup.

  • Choosing stiff pedals without suitable mounting

    Heusinkveld specifically requires a very rigid base for the Sprint. Fanatec, by contrast, says the CSL Pedals can also be braced against a hard surface.

    Before choosing a model, decide how you’ll keep your pedals and seat in place throughout the session.

Key brands to consider

Fanatec

The CSL Pedals are a basic two-pedal set that measures pedal position and can be upgraded separately. The CSL Elite Pedals V2 are a different set and shouldn’t be confused with the basic model.

  • Fanatec says the CSL Pedals can be securely mounted or braced against a hard surface.
  • The basic set doesn’t have a load-cell brake. For a direct USB connection to a PC, Fanatec lists a separate adapter or the Load Cell Kit.

Thrustmaster

The T-LCM is a three-pedal load-cell set with adjustable pedal positions.

  • Thrustmaster includes six springs to let you adjust the pedal feel.
  • For consoles, Thrustmaster specifies an RJ12 connection to a Thrustmaster wheel base. Direct USB connection is for PC.

MOZA Racing

MOZA describes the SRP2 as connecting directly to a PC, with adjustable pedal positions.

  • MOZA lists two settings for adjusting throttle preload.
  • These specifications aren’t the result of a comparative test, and they don’t confirm console compatibility.

Logitech G

The PRO Racing Pedals are a three-pedal set with sliding modules and adjustable throttle and brake feel.

  • Logitech G describes replaceable springs for the throttle and clutch, and elastomers for the load-cell brake.
  • Before choosing the set, check that it will connect to your specific PC or console setup.

Heusinkveld

The Sprint is designed for a fixed setup, with an individually adjustable pedal angle.

  • The Heusinkveld instructions explain how to adjust the angle.
  • The manufacturer requires a very rigid base. According to the instructions, the two-pedal set doesn’t include a clutch.

Suitable products on Joybuy

Suitable products coming soon.

Frequently asked questions about sim racing pedals

How do I set up new pedals for practice in iRacing?

iRacing requires you to calibrate your controls when setting them up for the first time and whenever you connect new controllers. For the load-cell pedals listed in its guide, iRacing specifies a Brake Force Factor of 0.00; for the position-sensing pedals listed, the guide gives a range of 1.60 to 2.00. These settings are for iRacing and aren’t general recommendations for other games.

Can I connect the T-LCM via USB and RJ12 at the same time?

No. Thrustmaster recommends using only one cable at a time. For consoles, use RJ12 to connect to a Thrustmaster wheel base. On PC, you can use either RJ12 to the base or USB directly to the PC. Leave the cable you’re not using disconnected.

Do I need extra accessories to use CSL Pedals on PC?

Only if you want to connect the CSL basic set directly to a PC via USB without a compatible Fanatec wheel base. Fanatec lists the separately available ClubSport USB Adapter or CSL Pedals Load Cell Kit for this. This additional USB requirement doesn’t apply if you connect via RJ12 to a compatible Fanatec base.

Who should I contact if a product develops a fault after purchase?

If you buy from a retailer as a consumer in the EU, you have at least two years of statutory legal protection against the seller, starting from the day you receive the goods. Your Europe, the European Union’s information portal, explains these rights. An additional manufacturer’s warranty doesn’t replace them.