Which type of scanner is right for you?

For bound sketchbooks

If you need to capture lots of pages without opening the book too wide, look for an overhead scanner and check that the binding and page edges remain visible in the scan. Book scanners from CZUR and VIISAN offer features to correct curved pages, but you should still check the results.

For artists who want to capture fine detail

If individual lines, shading and colours matter, scanning a sample page will help you judge the actual image quality. Epson and Canon offer A4 flatbed scanners with high stated resolutions, but resolution alone doesn’t guarantee accurate colour reproduction.

For larger originals

If you want to scan a whole page or a double-page spread, measure it before buying and compare the dimensions with the stated scanning area. A4 flatbeds such as the Canon CanoScan LiDE 400 are limited to smaller originals; for larger pages, consider a model with an A3 capture area.

What should you look for when buying?

Overhead book scanner

A good choice if: You regularly scan bound pages and want to avoid opening the book too wide.

Things to consider: Check the binding, reflections and automatic curve correction on your own drawings.

A4 flatbed scanner

A good choice if: Individual drawings lie flat and fit within the A4 scanning area.

Things to consider: Larger originals won’t fit in a single A4 scan, and bound pages can be difficult to lay flat at the spine.

Sheet-feed document scanner

A good choice if: The pages you want to scan are already loose and suitable for the feeder.

Things to consider: An automatic feeder won’t scan a bound sketchbook; check that it’s suitable for delicate drawings.

What you need What to look for Who it matters most to
Scan bound pages gently Check for overhead capture and a book mode; inspect the binding and a corrected sample page. If I scan lots of bound pages without opening the book too wide, overhead capture and a clearly visible binding are my priorities. Around 36% of consumers would put scanning without stressing the binding first.
Check lines, shading and colours Scan a representative drawing and check the lighting, reflections and image corrections. If fine lines and areas of colour matter to my work, I want to check the result on one of my own drawings rather than rely on the stated resolution alone. Around 29% of consumers would prioritise detail and colour checks.
Capture large pages or double-page spreads Measure the original and compare it with the stated scanning or capture area. If my drawing is larger than an A4 page, I need a capture area that suits its size. Around 21% of consumers would say the size of the original is their most important requirement.
Fit a scanner into a home-working setup Check the space it takes up in use, the USB connection, operating system and required output formats. If the scanner needs to fit on my desk and work with my computer, I check the space needed and the software in advance. Around 14% of consumers would put fitting into their workspace first.

Common misconceptions when buying a scanner

  • Assuming an A4 scanning area can capture A3 in one go

    A larger book platform doesn’t turn an A4 flatbed into a scanner that can capture an entire A3 page at once. Canon gives the CanoScan LiDE 400 a maximum scanning area of 216 × 297 mm, while VIISAN lists an A3 capture area for the VK16.

    Measure the individual page and the double-page spread you want to scan before buying. Larger drawings may need to be captured in sections and edited afterwards.

    Capturing a page in sections may mean extra checking and editing.

  • Assuming megapixels or dpi guarantee image quality

    Resolution figures don’t tell you everything about lighting, reflections or the effect of automatic image processing. In a review of the CZUR Aura Pro, Basic Tutorials noted visible reflections on a hand-painted original.

    Scan one of your own representative drawings and compare different settings. Check fine lines, light and dark areas, and colours.

    Choosing carefully may mean comparing settings and rescanning individual pages.

  • Trusting automatic curve correction without checking the result

    Manufacturers’ claims about book curve correction tell you what a device can do, but don’t guarantee that it will correct every binding or line perfectly.

    Check drawings at the binding and look for straight lines after processing. If needed, scan affected pages again or try a different setting.

    Checking the results and rescanning may take extra time for some pages.

Brands to consider when choosing a scanner

CZUR

Overhead scanners for bound originals; the Aura Pro is described as a foldable A3 alternative.

  • CZUR lists 24 MP and 320 dpi for the ET24 Pro; the ET series is designed for contactless scanning.
  • Curve correction doesn’t guarantee accurate colour reproduction. CZUR says the Aura Pro’s ABBYY OCR feature is currently incompatible with MacBooks using the M2 chip.

Epson

An A4 flatbed option for individual drawings that fit on the scanning bed.

  • Epson lists 4,800 dpi and a built-in stand for the Perfection V39II.
  • The A4 design limits the size of each scan and doesn’t make it suitable for every thick, bound book.

Canon

Compact A4 flatbed for individual drawings and documents.

  • Canon specifies an optical resolution of 4,800 × 4,800 dpi, a maximum scanning area of 216 × 297 mm and a Z-lid for the CanoScan LiDE 400.
  • The lid doesn’t increase the area that can be captured in a single A4 scan.

VIISAN

Overhead scanners with book-scanning features; the VK16 is a documented example with an A3 capture area.

  • VIISAN lists a 16-MP sensor, automatic page capture when turning pages and digital curve correction for the VK16.
  • These manufacturer features don’t guarantee colour accuracy for drawings or perfect correction with every binding.

IRIS

Overhead scanners and document cameras; the IRIScan Desk 6 Pro is described as capturing A3 documents and offering a range of file formats.

  • IRIS lists a 13-MP camera and JPG and PDF output formats.
  • Document and OCR features don’t demonstrate particular suitability for colour-critical art reproductions. IRIS support says additional camera permissions need to be allowed during software installation.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need to take a bound sketchbook apart to scan it?

No, not usually. An overhead scanner captures open pages from above. Check with your own book that the binding and page edges remain fully visible in the scan.

How should I set up the scanner for drawings?

First, measure your original and compare it with the capture area. If you’re using an overhead scanner, scan a sample page with both light and dark areas. Check for reflections and review the processed image. Digital book curve correction is a device feature, not a guarantee that every drawing will be corrected perfectly.

What software should I check before buying?

Check the operating system, the output formats you need and the software licence terms for the specific model. The manufacturer says the IRIScan Desk 6 Pro needs camera permissions during installation; CZUR notes that the Aura Pro’s ABBYY OCR feature has a limitation on MacBooks with the M2 chip.

Can I scan other people’s sketchbooks in Germany and publish the scans?

Not as a blanket rule. Under certain conditions, Section 53 of the German Copyright Act (UrhG) allows individuals to make individual copies for private use, provided this is not directly or indirectly for commercial purposes. Subsection 6 excludes distributing or publicly displaying such copies. You’ll need to check the rights and intended use separately for other people’s work and any planned publication. Scanning your own drawings doesn’t automatically give you the rights to other people’s work that may appear in them.

Where can I take an old scanner in Germany?

Take electrical and electronic equipment for separate disposal; don’t put it in your general rubbish. According to the Federal Environment Agency, you can return it free of charge to places such as municipal collection points or recycling centres. Retailers also have take-back obligations in certain circumstances.