Which scanner is right for you?

Students with sketchbooks that have a spine

If you often scan artwork close to the spine, first check how the book sits on the scanner without having to force it flat. Plustek describes the OpticBook 4800 as a scanner for books and bound materials. A raised lid on its own does not mean it can scan right up to the book’s edge.

Students with large drawings

Measure your largest drawing and, if relevant, the open double-page spread before choosing an A4 scanner. Canon Germany gives the CanoScan LiDE 400 a maximum scan area of 216 × 297 mm, while Plustek Europe lists an area of 297 × 431,8 mm for the OpticSlim 1180.

Students with small desks

If space is limited, make sure there’s room for the scanner and book, as well as space to turn the pages. Also check the power supply and computer connection: Canon Germany says the LiDE 400 is powered via USB, while the Plustek OpticSlim 1180 needs a separate power supply.

What should you look for when buying?

Start with the usable scan area, then check how easy the book is to handle and how much space you’ll need. Finally, test the detail and software using a representative drawing.

Buying priority What to look for Who is this most important for?
Bound pages and book spines Try a typical page to see how far the book opens and how it sits on the glass. A raised lid does not automatically mean the scanner can scan right up to the book’s edge. If I want to capture artwork close to the spine, I need to be able to open the book without pressing down hard. Around 33% of consumers say scanning close to the book’s spine is their top buying priority.
Capturing the full page Measure your largest drawing and, if relevant, the open double-page spread in both directions. Compare the measurements with the usable scan area. If I want to capture a large page or double-page spread in a single scan, the size of the glass matters. Around 27% of consumers put page size first.
Space, power and computer connection Measure the space available, including room to turn the pages. Check the USB connection, power supply and operating system support for the exact model. If my desk is short on space, the scanner and book need to fit in my work area, and the scanner needs to connect to my computer. Around 20% of consumers say a small workspace is their top priority.
Lines, colours and editing Compare the optical resolution with the selectable resolution, then scan a representative drawing using your preferred colour settings. Check the software and output format for your computer, too. If fine lines and colours matter for how I’ll use the image later, I want to judge the results using my own artwork. Around 20% of consumers put drawing detail first.

Common buying misconceptions

  • “A4” means every sketchbook page will fit on the scanner

    According to Canon Germany, the Canon CanoScan LiDE 400 has a maximum scan area of 216 × 297 mm. A larger drawing or double-page spread may exceed this.

    Measure the area you actually want to capture, not just the book’s printed format.

    If your artwork is larger, you may need to scan it in sections and edit the images afterwards.

  • A Z-hinge or raised lid will automatically capture the book’s spine

    These lid designs are not the same as a scanner specifically designed for bound materials. On their own, they don’t guarantee that the page will be captured right up to the spine.

    Try a typical page on the scanner. If your artwork often reaches the spine, consider a model specifically described as suitable for bound materials.

    Repeatedly positioning the book can take extra time, and this type of design won’t automatically capture every area next to the spine.

  • The highest dpi figure is the only thing that determines image quality

    Canon distinguishes between optical and selectable resolution. A technical maximum is not an independent measure of how well a scanner will reproduce your drawings.

    Compare the optical resolution and try the settings you need on a representative piece of artwork.

    The wrong settings could create larger files or mean extra work to adjust lines and colours.

  • An older model in a comparison list is automatically the current replacement

    Epson Germany says the Perfection V39 is no longer available and lists the V39II as the new model. These are two different model names, not the same device.

    Check the full model name in the listing and don’t assume the V39 and V39II share the same specifications.

Brands worth considering

Canon

The CanoScan LiDE 300 and LiDE 400 are compact A4 flatbed scanners for suitable originals, connected to a computer via USB.

  • Canon Germany lists a scan area of 216 × 297 mm, USB power, a Z-hinge and dimensions of 250 × 367 × 42 mm for the LiDE 400.
  • A Z-hinge doesn’t guarantee that the scanner can capture right up to the book’s edge. LiDE 400 specifications do not automatically apply to the LiDE 300.

Epson

The Perfection V39II is an A4 flatbed scanner for photos and documents, with a stand.

  • Epson Germany describes it as USB-powered, with a design that lets you use it either flat or on its side.
  • Check that your sketchbook sits properly in the position you plan to use. The V39II’s features are not necessarily the same as those of the older V39.

Plustek

The models mentioned here take different approaches: the OpticBook 4800 is described as suitable for bound materials, while the OpticSlim 1180 offers a larger scan area.

  • Plustek Europe lists a maximum scan area of 297 × 431,8 mm for the OpticSlim 1180.
  • Allow for a footprint of 589 × 407 mm and a separate power supply for the OpticSlim 1180. The OpticBook 4800’s description does not guarantee it will suit every sketchbook.

Avision

The FB10 is a slim A4 alternative with a raised lid for thicker originals.

  • Avision Europe lists a height of 46 mm, a weight of 1,4 kg, USB power and a raised lid.
  • The product description is aimed mainly at documents. That doesn’t automatically mean it’s suitable for scanning detailed artwork or capturing right up to the book’s spine.

Suitable products on Joybuy

Related products will be available soon.

Frequently asked questions

Do I need to press my sketchbook firmly against the glass?

No. First check how far you can open the book without damaging it. A raised lid can be useful for thicker originals. For drawings close to the spine, you could also consider a design described as suitable for bound materials. Try it with a typical page to make sure it works with your book.

Can I use a USB scanner straight away with any laptop I use for studying?

Not just because it has a USB connection. Check the drivers, operating system and available interface for the exact model. The Plustek OpticSlim 1180 also needs a separate power supply.

What’s the difference between a guarantee and statutory warranty rights when buying in Germany?

Statutory warranty rights cover claims against the seller for faulty goods. A guarantee is an additional voluntary service subject to its own terms. The consumer advice centre recommends checking who the seller is and what guarantee, if any, is explicitly offered with the specific product.

Can I scan my own drawings and share them online?

The German Patent and Trade Mark Office explains that a drawing may be protected by copyright if it represents an original intellectual creation; this protection applies without registration. If a page includes someone else’s protected work, whether you can publish it needs to be considered separately. This does not mean every sketchbook page is automatically cleared for publication.

What should I do with an old scanner in Germany?

Do not put an old device in household or packaging waste. The German Environment Agency lists recycling centres and retailer take-back options. Which take-back arrangements apply depends on the circumstances.