Which type of scanner is right for you?

Artists with bound sketchbooks

If you want to digitise pages regularly without cutting the binding or pressing every spread down onto a glass surface, the book-page features of overhead scanners are worth considering. CZUR, VIISAN and IRIS describe these features for selected models.

Artists with loose or flat sheets

If you mainly scan individual drawings and can place them fully on a suitable glass surface, a flatbed scanner could be a good option. Epson and Avision offer A4 flatbed models; check that the scanning area is large enough for your originals.

Artists short on desk space

If you need to put the scanner away after use, consider its compact design separately from the capture area. IRIS describes the Desk 7 Pro as compact, while Epson lists a storage stand for the V39II. You’ll also need space for the open book while scanning.

What should you look for when buying?

First decide whether you’ll mainly scan bound pages or loose sheets. Then compare the format, scan quality and space needed for your workflow.

Overhead book scanner

A good fit if: You want to capture bound pages without pressing them down onto a glass plate.

Keep in mind: Lighting and positioning affect the results. Book-page correction doesn’t prove that colours in drawings will be reproduced accurately.

Flatbed scanner

A good fit if: You scan individual, loose or flat sheets that fit on the glass surface.

Keep in mind: Each original needs to be positioned correctly, and bound pages may not lie completely flat.

Buying priority What to look for Who it matters most to
Detail and colour Compare a sample featuring fine lines and typical paper colours; megapixels and dpi aren’t directly comparable. If I want to assess fine lines, shading and paper colours, I need a sample scan of my own drawings. Around 31% of consumers put detail and colour first.
Bound pages Test an open spread to see how the scanner handles the gutter, edges and book-page correction. If I don’t want to cut the binding or press my sketchbook down hard, it’s important to capture the bound book as fully as possible. Around 31% of consumers prioritise gentle book scanning.
Capture area Measure your largest original and check it against the full capture area of the specific model. If my open sketchbooks are larger, I want to capture the whole page, including the margin I need, in one go. Around 23% of consumers prioritise finding the right format.
Space and workflow Allow for the scanner and book support; check the software, operating system and permissions required. If desk space is limited, the setup needs to work in practice, even with an open book. Around 15% of consumers put space requirements and workflow first.

Common pitfalls when buying a sketchbook scanner

  • Comparing megapixels directly with dpi

    VIISAN lists a 16-MP sensor for the VK16, while Epson gives the V39II a resolution of 4,800 dpi. These figures describe different things and, on their own, prove neither how well fine lines will be reproduced nor how accurately the colours in your original will be captured.

    Compare sample scans of the same type of drawing and check the lines, tonal range and page edges.

    Poor results may mean you have to repeat your scans.

  • Mixing up A4, A3 and similarly named models

    The capture area determines whether a whole page will fit in one scan. CZUR lists the Shine800 Pro as an A4 model; the Shine800A3 Pro is a different version. The Avision flatbed scanners mentioned here are also designed for A4.

    Measure your largest original and check the full model name against the capture area.

    Larger originals may need to be scanned in several sections per page.

  • Trusting automatic book-page correction without checking it

    CZUR and VIISAN describe features that correct curved pages. This doesn’t independently show how the lines and edges in your drawings will look after correction.

    Test a representative spread, checking both the unedited result, if available, and the corrected version.

    Some pages may need retouching or rescanning.

Notable scanner brands

CZUR

The ET24 Pro is part of the ET book scanner range; the Shine800 Pro is a differently positioned model, limited to A4.

  • CZUR describes the ET range as offering contactless capture up to A3 and automatic curve flattening.
  • The manufacturer says the Shine Pro range isn’t designed for books. The features listed don’t prove independently measured colour accuracy for drawings.

VIISAN

The VK16 is positioned as an overhead book scanner for bound pages, with capture up to A3.

  • VIISAN lists a 16-MP sensor, book mode, curve flattening and page separation for the VK16.
  • Check your drawings and page edges in the scan results; the listed features don’t prove colour accuracy for your originals.

IRIS

The IRIScan Desk 7 Pro is a compact document camera and desktop book scanner.

  • IRIS lists an 18-MP sensor, anti-glare lighting and page-turn detection.
  • According to IRIS, software installation requires camera permissions, among other things. The manufacturer’s specifications don’t prove measured reproduction accuracy.

Epson

The Perfection V39II is an A4 flatbed alternative for individual drawings that can be positioned to fit.

  • Epson lists a resolution of 4,800 dpi and a storage stand for this model.
  • The A4 glass surface and the need to position each original limit its usefulness for larger sketchbooks or those that are difficult to open flat.

Avision

The FB10 and PaperAir 10 are slim A4 flatbed scanners, not contactless book scanners.

  • Avision describes the FB10 as having a lift-up lid for thicker originals.
  • Both models mentioned are limited to A4. A lift-up lid doesn’t mean every bound sketchbook can be fully captured without pressing it down.

ScanSnap

The SV600 is designed as a contactless overhead scanner for books and originals up to A3.

  • ScanSnap lists a feature for correcting curved book pages.
  • The published optical resolution varies depending on the position. It shouldn’t be taken as a blanket claim of 600 optical dpi across the whole page or as proof of suitability for art reproduction.

Sketchbook scanners at Joybuy

Suitable products coming soon.

Frequently asked questions

Do I need OCR and searchable PDFs for drawings?

Only if you also want to search or edit text in your sketchbooks. VIISAN describes OCR for text and notes that recognition depends on the original and its layout. OCR doesn’t prove the visual quality of a scanned drawing.

What should I set up before my first batch of scans?

Start by testing your largest book and a page with fine lines, then check the gutter, edges and image corrections. IRIS describes an installer for Windows and macOS for the Desk 7 Pro, as well as the camera permissions required. Check the software version and its requirements for your computer.

What are my rights if I need to return an item or it’s faulty?

For online contracts in Germany, you generally have a 14-day right of withdrawal; the Verbraucherzentrale says the period starts from the conclusion of the contract or receipt of the goods. Your statutory rights against the seller are separate from any voluntary manufacturer’s warranty. Check the terms for your specific purchase.

Can I publish digitised sketches online?

That depends on who created the drawings and what usage rights apply. The German Patent and Trade Mark Office explains that creative drawings may be protected by copyright; this doesn’t give you blanket permission to publish other people’s work.

How should I dispose of an old scanner?

Old electrical equipment must be returned separately, not put in your household rubbish. stiftung ear lists recycling centres and suitable retail take-back points as free options; check in advance that your chosen collection point accepts the device.