Which type of scanner is right for you?

People with hard-bound sketchbooks

If you often scan bound pages, you’ll want to protect the binding and capture drawings clearly right up to the spine. CZUR and VIISAN describe their overhead scanners as suitable for bound materials; Plustek specifies a 2 mm book edge for the OpticBook 4800.

Artists working with fine lines and areas of colour

If you need to assess fine strokes, edges and colour gradations, check one of your own drawings in the export format you plan to use. Manufacturer claims about resolution or correction features alone don’t show how your particular artwork will be reproduced.

People with large double-page spreads

If you want to capture an open double-page spread in a single pass, compare the actual capture area with your open book. CZUR specifies A3 for the ET series, VIISAN specifies A2 for the S21, and Canon gives the LiDE 400 a maximum capture area of 216 × 297 mm.

What should you look for when buying?

What matters What to check before buying Who it matters most to
Binding and spine Test it with one of your own books to see whether the drawing remains visible right up to the spine, and how far you need to open the book. Plustek’s stated 2 mm book edge for the OpticBook 4800 is a manufacturer specification, not a guarantee of shadow-free scans. If I often scan hard-bound pages, I want to capture the spine without pressing the book too flat. Around 36% of consumers put the binding and spine first.
Lines, colours and export Check a page with fine lines and areas of colour in the export format you intend to use. VIISAN describes the S21’s resolution of up to 600 dpi as software-interpolated; optical sensor specifications and interpolated output are not the same thing. If I want fine strokes and areas of colour to remain clear in my file, I want to assess them using one of my own drawings. Around 29% of consumers prioritise how their drawings are reproduced.
Size of the original Measure your largest open page and compare it with the capture area of the specific model. Canon specifies a maximum of 216 × 297 mm for the LiDE 400; CZUR specifies A3 for the ET series and VIISAN specifies A2 for the S21. If I want to scan a large double-page spread as fully as possible in one pass, the measurements of the open book matter to me. Around 21% of consumers prioritise the size of the original.
Space, computer and workflow Allow space for the scanner and for turning pages, and check the software and system requirements for the exact model and operating system. Epson specifies an integrated stand for the Perfection V39II; CZUR lists software downloads for specific models, including the ET24 Pro. If my hobby room is short on space and I want to export files easily, a suitable setup matters. Around 14% of consumers prioritise space and workflow.

Common misconceptions when choosing a scanner

  • Confusing page size with the size of an open double-page spread

    An individual page may fit on an A4 flatbed scanner, while an open double-page spread may exceed its capture area. Canon specifies a maximum of 216 × 297 mm for the CanoScan LiDE 400.

    Before buying, measure your largest open page, including the margins you need, and compare it with the capture area.

    If the whole original doesn’t fit on the scan area, you may need to take several scans and stitch them together afterwards.

  • Mistaking interpolated dpi or output pixels for optical image detail

    VIISAN describes the S21’s resolution of up to 600 dpi as software-interpolated. Its brochure distinguishes the 20.1 MP sensor from an interpolated output of 27 MP; these figures don’t describe the same thing.

    For detailed drawings, consider the sensor and output specifications separately, and assess a representative file.

  • Assuming automatic book correction reproduces the original exactly

    CZUR and VIISAN describe correction features for bound pages. This doesn’t mean that the lines, proportions and colour transitions in every individual drawing will remain unchanged.

    Check the spine, straight lines, colours and margins using one of your own test pages, and compare the corrected output with a scan that has had as little processing as possible.

    If the scan doesn’t look the way you want, you may need to do more image editing.

A guide to the key brands

CZUR

The ET series is a range of overhead scanners for bound materials. CZUR specifies A3 capture and automatic page correction as manufacturer features.

  • Contactless scanning may be useful for bound materials; these features are based on CZUR’s own specifications.
  • An overhead scanner needs space for laying out the book and turning pages. Correction features don’t independently guarantee accurate colour or line reproduction for your own sketches.
  • Check the software requirements for the specific model and operating system before buying.

VIISAN

According to VIISAN, the S21 is an A2 overhead scanner for large bound materials.

  • VIISAN specifies a 20.1 MP sensor and software-interpolated resolution figures.
  • VIISAN’s brochure distinguishes the optical 20.1 MP sensor from an interpolated 27 MP output. Sensor pixels and interpolated output are not the same thing.
  • Check the capture area and scan one of your own pages rather than assuming an interpolated resolution will capture fine details in your drawings.

Plustek

According to Plustek, the OpticBook 4800 is a book-edge flatbed scanner for individual bound pages positioned against the glass.

  • Plustek lists a 2 mm book edge and automatic cropping as features of this model.
  • Whether a sketch close to the spine can be captured without distracting shadows depends on the original and how it is positioned.
  • You’ll need to position the book carefully for each scan.

Canon

According to Canon, the CanoScan LiDE 400 is an A4 flatbed scanner for individual pages that lie flat.

  • Canon specifies a maximum scan area of 216 × 297 mm, USB power and an optical resolution of 4,800 × 4,800 dpi.
  • A larger open double-page spread won’t fit entirely on this scan area.
  • Check that drivers are available for your operating system.

Epson

According to Epson, the Perfection V39II is an A4 flatbed scanner for photos and documents, with an integrated stand.

  • Epson says the integrated stand lets you position the scanner flat or on its side.
  • Consider larger double-page spreads and book spines that won’t lie flat when choosing a scanner.

Joybuy products for sketchbook pages

Related products coming soon.

Frequently asked questions about sketchbook scanners

Is A4 enough if my sketchbook has A4 pages?

An A4 flatbed scanner may be enough for a single page that fits. Canon specifies a maximum scan area of 216 × 297 mm for the LiDE 400. If you want to capture the whole double-page spread in one pass, measure the book when it’s open rather than relying on the page size alone.

Should I use automatic book correction for drawings?

If the software offers the option, compare the corrected scan with an output of the same page that has had as little processing as possible. CZUR and VIISAN describe correction features for their overhead scanners, but this doesn’t prove that the fine lines in your original will remain unchanged.

What should I check before installing the software and using the scanner regularly?

Check that the download is for your exact model and operating system, and choose an export format that works for your drawings. CZUR lists software downloads for specific models, including the ET24 Pro; Canon provides a driver check for the LiDE 400. Check a test file before scanning a batch of pages.

What are my rights if a scanner bought online is faulty?

According to the Verbraucherzentrale, consumers can generally assert their statutory warranty rights against the seller for a new faulty product within two years of delivery; this is separate from a manufacturer’s guarantee. The Verbraucherzentrale also notes that online purchases generally come with a 14-day right to cancel, although the conditions and exceptions should be checked for each individual case.

Can I scan pages from someone else’s sketchbook for my own use?

Under the conditions set out in § 53 Abs. 1 UrhG, individuals may make individual copies for private, non-commercial use. In particular, the source must not have been obviously made or made available to the public unlawfully. This private-copying rule is not blanket permission to publish or sell someone else’s drawings.