Which scanner type might suit your group?

Groups with delicate, bound books

If you want to put as little strain as possible on your sketchbooks, an overhead scanner can capture a bound book without placing it on a glass surface to scan. CZUR and VIISAN describe this type of capture for their respective book scanners.

Groups with pages full of drawings

If lines, colours and image edges matter to your shared archive, check the exported image files using your own originals. OCR specifications won’t tell you how drawings will look in a scan.

Groups with large or varied formats

If your sketchbooks come in different sizes, measure the largest one when opened and compare it with the capture area of the specific model. Stated formats vary, for example, between A4, A3 and A2 devices.

What to look for when buying

First, decide whether the book needs to stay bound, then measure your largest open original. Next, compare sample scans and test the full process on the computer your group plans to use.

Consideration What to check before buying Who this matters most to
Protecting the binding Use a typical bound book to check that the gutter, page edges and straight lines look right in the exported image. If you’re digitising bound sketchbooks, you’ll want to avoid putting strain on the spine by laying it on glass, while still being able to check the gutter and edges. Around 36% of consumers put protecting the binding first.
Reproducing drawings Scan the same page with fine lines, light tones and coloured paper, then compare the saved image files. If your shared archive is all about the drawings, you’ll want to assess lines, colours and image edges in the actual scans. Around 29% of consumers prioritise how their drawings are reproduced.
Capturing the right format Compare the width and height of your largest open book with the capture area of the exact model. If you also want to capture large or varied sketchbook formats, the largest one needs to fit fully within the scanning area. Around 21% of consumers focus primarily on the capture area they need.
Setting up a group workflow Test the process with several pages, from turning them to saving the files with clear names, and check the software on the computer you plan to use. If several people will take turns scanning, you’ll want to save and find files reliably without having to set up every step again each time. Around 14% of consumers prioritise a repeatable group workflow.

Avoiding common buying mistakes

  • Choosing a format without measuring the book when open

    An A4, A3 or A2 device offers a different capture area. If your open book doesn’t fit, it may not be possible to capture the whole page in a single scan.

    Measure the largest page or spread you want to capture and compare both dimensions with the stated capture area of the specific model.

  • Treating OCR, megapixels or interpolated dpi as proof of good drawing scans

    Text recognition and image output are different functions. A megapixel or software-interpolated dpi specification alone won’t show how the lines, colours and edges of your sketches will look in the saved image.

    Compare sample scans of the same page in the image files actually produced, paying attention to the lines, colours and paper you typically use.

  • Assuming group use means you’re allowed to publish your scans

    Rules on private copying don’t automatically tell you whether you can make scans publicly available.

    Before sharing, check which works and personal details are included, and what rights or legal grounds apply to your intended use.

Useful brands to consider

CZUR

The ET series is a range of overhead book scanners for bound originals, within the capture limits of each model.

  • CZUR says the ET series offers laser-assisted curve correction.
  • The German series page doesn’t state size limits consistently. Check the limit for the specific model against the dimensions of your books.

VIISAN

The S21 is an overhead option for bound and loose originals when you need an A2 capture area.

  • VIISAN specifies a 20,1-MP CMOS sensor and software-interpolated output up to 600 dpi for the S21.
  • The interpolated dpi figure isn’t an optical resolution and doesn’t show which details of your drawings will be retained in the scan.

Epson

The Perfection V39II is an A4 flatbed scanner for photos and documents, suited to smaller originals that can be laid flat.

  • Epson specifies 4.800 dpi and USB power for this model.
  • Its A4 design limits its ability to capture larger open books. The resolution specification isn’t a test of how faithfully your sketches’ colours will be reproduced.

Plustek

The OpticBook 4800 is a book-focused flatbed scanner for originals within its stated scanning area.

  • For the eBookScan version, Plustek specifies a 2-mm book edge and 600 dpi optical resolution.
  • These specifications come from a US product page. Check the version, what’s included and the support available for the specific offer in Germany.

IRIS

The IRIScan Desk 6 Pro is an A3 overhead option for groups that want searchable PDFs as well as image files.

  • IRIS specifies a 13 MP camera and A3 capture area; the manufacturer lists image PDF and searchable PDF as output formats.
  • OCR and advertised scanning speed don’t prove the quality of hand-drawn images. IRIS provides software installation instructions for Windows and macOS.

Joybuy products

Suitable products coming soon.

Frequently asked questions

Does a sketchbook need to be cut open or flattened to scan it?

No. A suitable overhead scanner can capture bound books without removing the binding. CZUR and VIISAN describe this type of capture for their respective devices; check your original to see how far it can be opened for turning the pages.

Why would we need OCR for drawings?

OCR is for recognising text, for example to create searchable PDFs or editable files. For the drawings themselves, you should also check the image file produced; the output formats alone don’t prove that colours will be reproduced faithfully.

What do we need to set up a shared scanning station?

Choose a computer, agree on a storage and file-naming process, and run some sample scans. For the IRIScan Desk 6 Pro, IRIS provides an online installer for Windows and macOS and notes that camera permissions are required.

What should we check about software, accessories and support before buying?

For the specific offer, check that the software, operating system support, accessories and service you need are all covered. A product page for a model in another country doesn’t tell you what’s included in a particular offer in Germany; Plustek publishes separate installation and support information.

Can our group publish scanned sketchbooks online afterwards?

You can’t determine this simply from owning the book or being able to make private copies. Under Section 19a of the German Copyright Act (UrhG), making a work publicly available is a separate area of rights; Section 53 of the UrhG covers reproductions for private and other personal purposes under certain conditions. Check which rights you need for your specific publishing plans. If scans contain personal data, processing them also requires a legal basis under Article 6 of the GDPR; the Federal Commissioner for Data Protection and Freedom of Information explains that consent is one possible legal basis, but not the only one.