Which scanning method is right for you?

Collectors with lots of magazines

If your mounted slides are stored in compatible magazines, a magazine scanner can reduce the need to reload them during a magazine run. First, check that the magazine type and mounts work with the specific model. For the DigitDia evolution, reflecta lists Universal, CS and LKM magazines with suitable 35mm mounts.

Careful image selectors

If you want to check or edit individual holiday shots on your computer, a PC-connected film scanner may suit you for smaller batches. The F.A.Z. Kaufkompass rates the Plustek OpticFilm 135i positively for its scan quality and software, but notes that it can scan no more than four mounted slides at a time.

Those who want to view slides without a scanning PC

If you want to view and save compatible slides directly on the device, a stand-alone scanner with a display and memory card slot could be a good fit. These models won’t save you from repeatedly loading slides if you’re processing lots of small batches in holders.

What should you look for when buying?

First, check the format, mounts and magazine used for your slides. Then choose a scanning workflow based on what matters most to you: minimising handling, editing on a computer or viewing slides without a PC.

Priority What to check before buying Who is it important to?
Throughput and reloading Check which magazine types are supported or how many slides fit in each holder: reflecta lists Universal, CS and LKM magazines for the DigitDia evolution; Plustek says the OpticFilm 135i can take up to four slides. If I have lots of magazines full of mounted slides, I want to reload as infrequently as possible. Around 40% of consumers put throughput first.
Image checking and editing Check the software and output formats; assess standard image capture and interpolated output separately. If I want to check and edit selected holiday shots on my computer, I’m happy to scan smaller batches. Around 30% of consumers prioritise image checking and post-processing.
Format and mount compatibility Check the film format, mount thickness and magazine type against the specifications for the specific model. For the supplied x33 scan holder, reflecta lists a maximum mount thickness of 3.2 mm. If I’m unsure about the format, mount thickness or magazine used for my collection, I want to check compatibility before buying. Around 20% of consumers put compatibility first.
Viewing slides without a scanning PC Check the display, compatible card type and storage capacity. Rollei says the DF-S 310 SE supports SD/SDHC cards up to 32 GB. If I want to view and save scans directly on the device without a scanning PC, a straightforward way to manage files is important to me. Around 10% of consumers prioritise viewing slides without a PC.

Avoid common misconceptions

  • ‘Automatic’ doesn’t mean unlimited batch scanning

    According to the manufacturer, the Plustek OpticFilm 135i can take up to four slides per scan. That’s why the F.A.Z. Kaufkompass considers it less suitable for larger collections.

    Compare the capacity per scan and the compatible magazines with the number of slides you have and how they’re stored.

    With small batches, you’ll need to reload the holder repeatedly and check your scans.

  • Interpolated pixels don’t mean extra image detail has been captured

    Both reflecta and Rollei describe a higher output resolution as interpolated. A higher pixel count alone is therefore no proof that more detail has been captured.

    Compare image capture and interpolated output separately, and check important images against suitable scan results.

  • Choosing magazine feed without checking compatibility

    The stated benefit of the reflecta DigitDia evolution applies to the magazine types listed by the manufacturer and suitable 35mm mounts.

    Make a note of the magazine type and mounts in your collection, then check both against the specifications for the specific model.

    Depending on your collection, you may need to sort or load your slides beforehand.

  • Using an SD card as your only photo archive

    Stand-alone models can save scans directly to an SD card. The Federal Office for Information Security explains why important files should also be backed up elsewhere.

    Plan how you’ll transfer, store and regularly back up your files from the outset.

    You’ll need another storage option to create an additional backup.

Brands and models to consider

reflecta

The models mentioned here suit different workflows: a magazine scanner and a compact stand-alone scanner with a holder.

  • According to reflecta, the DigitDia evolution handles compatible magazines and saves scans to an SD card.
  • According to reflecta, the x33 scan holder takes four mounted slides up to 3.2 mm thick. Its higher advertised pixel count is interpolated.

Plustek

The OpticFilm 135i is a PC-connected film scanner for compatible 35mm slides and film strips, best suited to smaller batches.

  • Plustek lists an infrared channel and a hardware resolution of up to 7200 dpi. The F.A.Z. Kaufkompass praises the scan quality and software of the model it tested.
  • The hardware resolution alone doesn’t prove that the scanner delivers a corresponding level of independently measured detail. The F.A.Z. Kaufkompass also notes that it can scan no more than four mounted slides at a time.

Rollei

The DF-S 310 SE is an example of a stand-alone model for viewing and saving compatible slides and negatives on the device.

  • Rollei lists a display, internal storage and support for SD/SDHC cards up to 32 GB.
  • The output of up to 24 MP listed by Rollei is interpolated from image capture at 14 MP. The advertised scan speed is a manufacturer’s claim.

Epson

The Perfection V600 Photo is an example of a flatbed scanner for slides and other film originals.

  • For this model, Epson lists holders for four 35mm slides and medium-format film, as well as TIFF output.
  • Epson Germany lists the Perfection V600 Photo as no longer available. These details apply to this specific model and don’t confirm that it can currently be bought new.

Kodak

The SLIDE N SCAN, sold under the Kodak brand, is a stand-alone example for the slide and negative formats listed on the product page.

  • The Kodak product page lists 135, 110 and 126 format slides.
  • According to the product page, C+A Global is responsible for manufacturing and sales, and the product isn’t available in every country. This doesn’t confirm availability in Germany or magazine handling.

Suitable products on Joybuy

Suitable products coming soon.

Frequently asked questions

How can I tell whether my slides will fit in a scanner?

Check the film format, outer dimensions and thickness of the mounts, as well as the magazine type, using a few representative slides. For the supplied x33 scan holder, reflecta lists four mounted slides up to 3.2 mm thick; for the DigitDia evolution, it lists specific magazine types. These details don’t apply to other models as a rule.

How should I store scans from an SD card?

Transfer the files to a dedicated archive medium and create an additional backup. The Federal Office for Information Security recommends backing up data; the SD card itself isn’t an additional copy.

What else should I plan for when setting up my scanning workflow?

Allow time for loading and checking your slides, and decide how you want to store the files. With a PC-connected scanner, also check that your computer and software suit the workflow you have in mind. With a stand-alone model, check that the card type and storage capacity meet your needs.

Can I put an old slide scanner in my household rubbish?

No. According to the Federal Environment Agency, old electrical equipment must be collected separately from mixed municipal waste.