Who are the different scanners suitable for?

Project group with a few slides

If you want to choose images for a presentation and save them without a complicated computer setup, look for compatible slide holders and an easy way to transfer files. reflecta and Kodak Photo Plus describe standalone devices with SD card storage for this purpose.

Group with a large slide collection

If you have lots of mounted slides to scan, compare a small-capacity holder with a magazine scanner whose magazine is genuinely compatible with your collection. Plustek says the OpticFilm 135i can scan up to four mounted slides per pass; reflecta lists specific compatible magazine types for the DigitDia 8000.

Group that needs to edit images

If you want to check or edit selected images on a computer, the scan and file output workflow matters just as much as the resolution figure. The Plustek OpticFilm 135i is a PC-connected film scanner for 35mm slides and negatives.

What should you look for when buying?

Standalone slide scanner with SD card

A good fit if: you want to view compatible slides at the scanning station without a computer and save them as JPEGs for your presentation.

The trade-off: output and editing options depend on the model. The reflecta x66-Scan’s 22 MP output is interpolated from a sensor specified at 14 MP.

PC-connected 35mm film scanner

A good fit if: your slides are in 35mm format and you want to check and edit selected scans on a computer.

The trade-off: According to Plustek, the OpticFilm 135i takes a maximum of four mounted slides per holder pass. The independent F.A.Z. Kaufkompass test praised its scan quality, but noted its limited throughput and that scans can look a little flat.

Magazine scanner

A good fit if: you have lots of mounted slides already stored in a magazine confirmed as compatible and want to scan whole magazines repeatedly.

The trade-off: The reflecta DigitDia 8000 requires a computer and supports the magazine types listed by the manufacturer. reflecta quotes a scan time of around 100 seconds at 5000 dpi.

Flatbed scanner with transparency unit

A good fit if: you want to scan printed photos or compatible film strips as well as slides.

The trade-off: You’ll need a transparency unit and compatible film holders. Epson Germany lists the Perfection V600 Photo as discontinued.

Buying priority What to look for when buying Who is this particularly important to?
Slide format and holder Check the film format and mounts on your originals; check the holders and, for magazine scanners, the exact magazine type. If I have mounted slides, I want to be sure the mounts and format will fit the scanner. Around 36% of consumers have this as their main concern.
Simple storage Check whether a computer is required, whether the scanner outputs JPEGs and what type of card it needs. Kodak Photo Plus points out that the SD card required for the SLIDE N SCAN is not included. If I want to choose images quickly for a presentation, I need a straightforward process without unnecessary setup. Around 29% of consumers prioritise this simple storage method.
Image files and editing Distinguish between sensor and output figures: reflecta specifies a 14 MP sensor and 22 MP interpolated output for the x66-Scan; Rollei lists 13 MP effective resolution and up to 25 MP upscaled output for the DF-S 1300 SE. If I want to check or edit selected images on a computer, I focus on the file and scanning workflow rather than just a high MP figure. Around 21% of consumers make editing their main priority.
Throughput for large numbers of slides Check the number of slides, holder capacity and magazine compatibility separately. Plustek says the OpticFilm 135i can scan up to four mounted slides per pass; reflecta quotes around 100 seconds per scan at 5000 dpi for the DigitDia 8000. If I have a large collection to scan, I want to be able to estimate the time needed to change individual holders and transport magazines. Around 14% of consumers prioritise throughput.

Common misconceptions when buying a scanner

  • Confusing a high output MP figure with the sensor resolution

    The reflecta x66-Scan’s 22 MP output is interpolated from a sensor specified at 14 MP. Rollei lists an effective resolution of 13 MP for the DF-S 1300 SE, with output of up to 25 MP through upscaling.

    For the model you’re considering, compare the sensor and output figures separately. Choose based on the result you need, not the biggest number.

  • Assuming a small-capacity holder works like a magazine feeder

    The Plustek OpticFilm 135i takes a maximum of four mounted slides per pass; the reflecta DigitDia 8000, by contrast, only handles the compatible magazines listed by the manufacturer.

    Count your slides and check whether they’re stored individually or in a specific type of magazine.

  • Assuming a memory card or compatible holder is included

    Holders and supported formats vary between devices. According to Kodak Photo Plus, the SD card required for the SLIDE N SCAN is not included.

    Before choosing a model, check that the supplied accessories and card requirements suit your slides and intended storage method.

Scanner brands at a glance

Plustek

The OpticFilm 135i is a PC-connected scanner for 35mm slides and negatives, with a small-capacity holder.

  • Plustek says it can scan up to four slides per pass and has an infrared channel.
  • The F.A.Z. Kaufkompass test of the 135i praised its scan quality, but noted its limited throughput and that scans can look a little flat. This verdict applies to this model.

reflecta

The x66-Scan and DigitDia 8000 offer different workflows: standalone JPEG output or magazine scanning on a computer.

  • According to reflecta, the x66-Scan supports the roll-film formats specified by the manufacturer as well as 35mm film.
  • The x66-Scan’s 22 MP output is interpolated. The DigitDia 8000 requires a computer and only supports the magazine types listed.

KODAK Photo Plus

The SLIDE N SCAN has a display and saves images directly to an SD card for the film types listed on the product page.

  • According to Kodak Photo Plus, the intended workflow includes holders for 135, 110 and 126 film.
  • An SD card is required for use; according to the supplier, it is not included.

Rollei

The DF-S 1300 SE is described as a standalone scanner with a display and memory card slot for compatible slides and negatives.

  • Rollei specifies an effective sensor resolution of 13 MP and output of up to 25 MP through upscaling.
  • Upscaled output is not the same as effective sensor resolution.

Epson

The Perfection V600 Photo is a documented flatbed option for groups who want to scan other originals as well as film.

  • Epson lists holders for 35mm slides, film strips and 120/220 film, as well as a transparency unit.
  • Epson Germany lists this specific model as discontinued; its technical suitability does not mean it is currently available to buy.

Suitable products at Joybuy

Related products will be available soon.

Frequently asked questions

Can any flatbed scanner scan mounted slides?

No. To scan film, a flatbed scanner needs a suitable transparency unit and compatible holders. Epson documents this feature for the Perfection V600 Photo, but lists the model as discontinued in Germany.

What should you do after scanning to an SD card?

Check the requirements for your specific device, transfer the files to the device you’ll use for your project and make an additional backup. The Federal Office for Information Security recommends regularly backing up files you have created to external storage media; an SD card alone is not a substitute.

What extra costs and service details should you check before buying?

Check whether the required memory cards and compatible holders are included, and whether the drivers and software work with your computer. According to Kodak Photo Plus, the SD card required for the KODAK SLIDE N SCAN is not included. The terms of the seller you actually choose will apply to warranty cover and repairs.

Can you publish digitised slides showing identifiable people on a school website?

Not simply because the images were scanned for a school project. Under § 22 KunstUrhG, portraits may generally only be distributed or displayed publicly with the consent of the person shown; any legal exceptions must be considered on a case-by-case basis. The Rhineland-Palatinate Education Server explains that consent is particularly important for school publications featuring identifiable people, and that parents’ consent is needed for minors.

Can you copy other people’s slides without restriction for lessons and a public project page?

No. § 60a UrhG allows certain non-commercial uses of published works for teaching and education, but only under the conditions set out there. A public project page is not automatically permitted just because it relates to a school topic. Check the rights to the specific images and the intended audience with your school.