When mixing existing dance tracks, your existing audio output may be enough, as long as you can connect and control your headphones or monitors as needed; you don’t automatically need an audio interface. For analogue stereo hardware, you need two suitable line inputs that can be used at the same time. An independent headphone mix, however, requires separately assignable stereo outputs – separate volume controls alone won’t create a second mix.
Which audio interface is right for you?
Producers with a single stereo monitoring path
You mix existing tracks and want to adjust your headphones and, if needed, monitors easily, without routing separate signals to different outputs. Focusrite user guides, MOTU and Audient document different ways to control volume and switch between monitoring paths.
Producers with limited desk space
You need controls that are easy to reach, and should allow room for connected cables as well as the unit itself. The manufacturers’ dimensions and connection details will help you check that it fits your setup.
Producers with stereo hardware
You want to record a synthesiser or drum machine in stereo from time to time, so you’ll need to check whether two line inputs can be used at the same time. MOTU and Arturia describe suitable connections for their respective models.
What should you look for when buying?
First, check whether your existing audio output is enough for monitoring. Then consider whether you need to record analogue sources or send different signals to your headphones and monitors. Details about the models mentioned come from the manufacturers’ documentation; Ableton explains the requirements for separate stereo outputs in Ableton Live.
| What you need |
What to look for |
Who is it important to? |
| Headphones and monitors |
Check the connections you need, the level controls and what happens when you plug in your headphones. On the Audient EVO 4, the monitor outputs are muted when you do. |
If I switch between headphones and monitors while mixing, I need a suitable monitoring setup that’s easy to control. Around 36% of consumers put a stereo monitoring path at the top of their list. |
| Space and controls |
Compare the space it takes up, including room for cables, with the manufacturer’s measurements. Dimensions are available for the EVO 4, Scarlett 2i2 4th Gen and MOTU M2; check the order in which the axes are listed for each. |
Anyone working at a small desk needs enough room for plugs and easy access to the controls they use every day. For around 29% of consumers, space is the main consideration. |
| Recording stereo hardware |
Check for two line inputs that can be used at the same time, the connection type and the right cables for your source. Don’t assume that mic or instrument inputs are also line inputs. |
If I want to record the left and right channels of a synthesiser or drum machine, I need to be able to connect both signals at once. Around 21% of consumers prioritise recording analogue stereo hardware. |
| Separate headphone mix |
Check whether a second pair of stereo outputs can actually be assigned to the headphone path. Having four line outputs alone doesn’t prove that independent headphone routing is possible. |
If I want to hear a different cue mix in my headphones from the one playing through the monitors, I need separately assignable outputs and suitable software routing. Around 14% of consumers prioritise independent routing. |
Avoid common buying mistakes
-
Don’t mistake two volume controls for two independent mixes
A dedicated headphone control may only change the volume, while the headphone signal still mirrors the monitor output. On the MOTU M2, the additional RCA outputs also mirror the main outputs.
Check the device specifications to confirm that a separate pair of stereo outputs can be assigned to the headphone path you want.
If you later need a dedicated cue mix, you may need an interface with outputs that can genuinely be assigned separately.
-
Don’t measure just the width of the unit
Plugs and cables need extra space beyond the unit itself. They can also affect whether you can reach the connections where you plan to position it.
Measure the space with cables connected, and check that the controls you use most often are within reach at your desk.
Depending on your setup, you may need different cables or to place the unit elsewhere.
-
Don’t confuse playback with recording requirements
Previously recorded tracks don’t need an analogue input for playback. But to record both the left and right sides of a stereo source at the same time, you need two suitable input channels.
Before buying, note down the signal paths you actually need and check whether you only need to monitor audio or also want to record external hardware.
Key brands at a glance
Audient
The EVO 4 is designed for a compact monitoring setup where you switch between headphones and monitors.
- Audient lists the EVO 4’s dimensions as 140 × 67 × 67 mm.
- Plugging in headphones mutes the monitor outputs. Headphones and monitors don’t get independent mixes or level controls.
Focusrite
The Scarlett 2i2 4th Gen has two inputs for a stereo monitoring path. The Scarlett 4i4 4th Gen is worth considering if you need extra line inputs or outputs.
- According to Focusrite user guides, the Scarlett 2i2 4th Gen has separate controls for the main and headphone outputs. The Scarlett 4i4 4th Gen is documented as having four line outputs.
- Four line outputs alone don’t show whether the headphone output can play an independent mix without additional routing.
MOTU
The M2 combines two combo inputs with level meters and separate controls for monitor and headphone volume.
- MOTU lists two balanced TRS line outputs and additional RCA outputs.
- According to MOTU, the RCA outputs mirror the main outputs, so they don’t provide an independent second pair of outputs.
Arturia
The MiniFuse 2 combines two inputs with MIDI connections and a USB hub for a compact production setup.
- Arturia specifies a dedicated headphone level control.
- The headphone output mirrors the monitor signal. Arturia also notes that a passive USB hub in the connection chain may not provide enough power.
Steinberg
The UR22C is a 2-in/2-out option if you need MIDI or an input/playback mix as well as stereo monitoring.
- Steinberg lists MIDI inputs and outputs, as well as a monitor mix.
- As a 2-in/2-out model, it isn’t a documented solution for two separate pairs of stereo outputs.
Suitable products at Joybuy
Suitable products coming soon.
Frequently asked questions
Do I definitely need an audio interface to mix existing dance tracks?
No, not just for mixing. Check whether your existing audio output lets you connect and control the headphones or speakers you need. Extra inputs or outputs are only relevant for the recording and routing tasks that call for them.
How do I set up a separate stereo headphone mix in Ableton Live?
You need two stereo output pairs that can be selected separately. Ableton explains how to enable them in Live’s audio settings and assign the main and headphone paths. First, check whether the headphone socket on your specific interface can be routed in this way.
What should I check when connecting headphones and active monitors?
Check that the connections match your cables and see what happens when you plug in your headphones. According to Audient, the EVO 4 automatically mutes the monitor outputs. The MiniFuse 2 has a dedicated headphone level control, according to Arturia, but its headphone output mirrors the monitor signal.
Who is responsible for the statutory guarantee if a new purchase is faulty in Germany?
If you buy from a business seller, they are responsible for the statutory guarantee; this is separate from any voluntary manufacturer’s or retailer’s guarantee. Your Europe states that faulty goods are generally covered by a minimum two-year guarantee from the date you receive them. The Verbraucherzentrale also explains the difference between the statutory guarantee and a commercial guarantee.