Who is this comparison for?

Percussion editors short on space

If your desk is small, measure the space needed for both monitors, including their feet or stands, and check that you can angle them towards your listening position.

Editors assessing attacks and timing

When comparing edited passages, a consistent stereo setup and the conditions at your listening position matter. This alone doesn’t prove that one option offers superior transient response.

Editors focused on kick bass

If you need to assess low drum frequencies, check the dB reference used for the frequency figures and consider how the monitors are positioned at your listening spot.

What should you look for when buying?

Compact pair with USB-C

A good fit if: you have limited desk space and want to connect your computer directly.

Consider: USB-C and positioning options don’t replace checking the bass at your own listening position.

Compact pair with analogue inputs

A good fit if: your computer or audio interface has compatible analogue outputs.

Consider: check that your available outputs match the inputs on the specific model.

Two monitors sold individually

A good fit if: you can position both units and have suitable signal paths for stereo.

Consider: one monitor isn’t enough for a stereo system; the number of units and connections must match your needs.

Priority What to check before buying Who it matters most to
Desk space and stereo positioning Measure the width and depth, including the feet; plan for your listening position and symmetrical placement. If two monitors need to fit on a small desk and be angled towards your listening position, placement is a key consideration. Around 28% of consumers prioritise this.
Assessing attacks and stereo Angle both speakers towards your listening position; compare the original and edited section at the same volume. If you edit rhythmic passages, a consistent stereo setup helps when listening critically. Around 22% of consumers focus on attacks and stereo.
Kick and drum frequencies Compare frequency limits only when they use the same dB reference; check the bass at your own listening position. If low drum frequencies are crucial to your editing, both the measurement reference and the effect of the room matter. Around 22% of consumers focus on assessing kick bass.
Connecting to a computer or interface Match your available outputs to the inputs on the specific model. If you want to keep using your existing audio source, its signal path must be compatible with the monitors. Around 17% of consumers prioritise connection compatibility.
A complete stereo system Check what’s included in the sale, as well as the cables and signal paths you’ll need. If you want to set up a complete stereo system, check whether the product is sold as a pair or as an individual monitor. Around 11% of consumers pay particular attention to the number of units and the overall effort involved.

Common buying and positioning mistakes

  • Comparing frequency limits with different dB references directly

    A lower limit measured at −10 dB isn’t the same as a figure measured at −3 or −6 dB. The room also affects the bass at your listening position.

    Compare the measurement references and check the low kick frequencies in your actual setup.

  • Assuming one monitor makes a complete stereo system

    Genelec states that the 8010A is packaged individually, while other models are sold as a pair.

    Check what’s included and, for a stereo setup, allow for two compatible units and the connections you’ll need.

    A second unit also needs space and a suitable signal path.

  • Assuming positioning EQ can fix every bass cancellation

    Reflections and room modes are also affected by the position of the speakers and your listening spot. Model-specific switches don’t change this geometry.

    First check how you can position both monitors, then use the adjustments available on the specific model.

Key brands to consider

ADAM Audio

The D3V is designed as a compact desktop pair with USB-C and balanced analogue inputs.

  • ADAM Audio lists detachable feet and a 3/8-inch thread for mounting.
  • The manufacturer’s 45 Hz figure is measured at −6 dB and, on its own, doesn’t prove that you can reliably assess low bass in your room.

Kali Audio

The LP-UNF is a desktop system with USB-C and settings for different desk and wall positions.

  • Its connection and positioning options may be useful when planning a compact workspace.
  • The model-specific settings don’t replace checking the speaker positions and bass at your own listening spot.

Yamaha

The HS3 is a compact monitor with analogue connection options.

  • Yamaha lists Room Control and High Trim switches, as well as a frequency limit of 85 Hz at −3 dB.
  • If you need to assess low kick frequencies, take this frequency figure and its measurement reference into account.

Genelec

The 8010A is a slim nearfield monitor for a stereo setup using two individually positioned units.

  • Genelec lists a width of 121 mm including the Iso-Pod, an analogue XLR input and rear-panel room adjustment.
  • Genelec states that each pack contains one monitor. You’ll need two units for stereo; its stated limit of 67 Hz at −6 dB isn’t directly comparable with figures at −3 or −10 dB.

PreSonus

The Eris 3.5 2nd Gen is a compact pair with analogue connections and front-panel controls.

  • PreSonus lists analogue inputs and a headphone amplifier with a front-panel output.
  • A USB audio input isn’t listed for this model; a manufacturer’s claim about transient response isn’t an independent comparison with other models.

Suitable products on Joybuy

Relevant products coming soon.

Frequently asked questions

How should I position two monitors on a small desk?

Angle both monitors towards your listening position, starting with a stereo triangle that’s as symmetrical as possible. Genelec recommends a 60° angle between the monitors and placing your listening position at the point of an equilateral triangle. Then check how your desk and walls affect the sound at your actual listening spot.

Can a Room or Desk switch replace good positioning?

No. These switches offer adjustments that vary by model, but they don’t change the position of the monitors or the room’s geometry. ADAM Audio describes a Desk switch on the D3V for certain frequency ranges. Position the speakers correctly first, then check the available settings.

How can I tell whether I’m getting two speakers?

Check exactly what’s included in the specific offer. Yamaha sells the HS3 as a pair, while Genelec states that each 8010A pack contains one monitor. In the latter case, you’ll need two compatible units for a stereo setup.

What statutory rights apply when buying from a business seller?

According to the European Union, goods bought from a business seller in the EU come with a legal guarantee of at least two years from the date you receive them. This is different from a voluntary manufacturer’s warranty; if there’s a fault, the seller is generally your point of contact.

Can I put old studio monitors in household rubbish?

No. In Germany, waste electrical equipment must be collected separately. The Federal Environment Agency lists it as equipment that must be collected separately, so don’t dispose of old monitors with household rubbish.