First, check whether your VoIP phone needs PoE in accordance with IEEE 802.3af/at or uses its own power supply. A switch without PoE will not power the phone over the network cable. A compact switch may be enough for a simple setup. If your office IT requires a configurable Voice VLAN or LLDP-MED, make sure the specific model supports the features you need and is compatible with your network configuration.
Which switch is right for you?
Desk with a PoE phone
If you want to power a compatible VoIP phone through the same network cable, check the phone’s PoE standard and the power available from the switch port. D-Link Germany documents these specifications for the DGS-1005P Revision B.
Desk with phone network requirements
If your IT team requires a Voice VLAN or an automatically assigned network policy, the specific switch model’s features and their configuration must meet those requirements. NETGEAR lists VLAN and QoS features for the GS305EP; Cisco describes LLDP-MED as a way to communicate a VLAN ID to a phone.
Desk with a separate phone power supply
If your phone already has a suitable power supply and you need extra wired connections, a compact switch with no stated PoE output may be enough. TP-Link Germany lists five Gigabit ports for the TL-SG105.
What to look for when buying
Unmanaged switch without PoE
A good fit if: Your phone uses its own power supply and you don’t need a configurable Voice VLAN.
Keep in mind: The switch won’t power your phone over the network cable.
Unmanaged PoE+ switch
A good fit if: You want to power a compatible phone over Ethernet and don’t need to configure a Voice VLAN locally.
Keep in mind: The power available at each port and the total PoE budget limit what the switch can power. This doesn’t confirm support for a configurable Voice VLAN.
Managed PoE+ switch
A good fit if: You need PoE and VLAN settings at your desk, and someone is responsible for managing the network configuration.
Keep in mind: VLAN and QoS features alone don’t confirm that the specific model supports LLDP-MED.
For a small office VoIP setup, your choice mainly depends on whether your phone needs PoE, what network requirements apply and how many devices you need to connect.
| What you need |
What to check before buying |
Who it matters most to |
| Power over PoE |
Check that the phone’s PoE standard matches the power available per port and the switch’s total budget. |
If I want to avoid a separate power supply for my phone and power it over the network cable, PoE compatibility is essential. Around 36% of consumers prioritise PoE. |
| Phone network configuration |
Ask your IT team about VLAN, tagging and LLDP-MED requirements, then check these against the manual for the exact model. |
If your office IT team requires a particular Voice VLAN or network policy for your phone, the switch must support it. Around 29% of consumers prioritise phone network requirements. |
| Number of ports |
Count the connection to the office network and all your devices; the uplink also uses a port. |
If you want to connect your phone and other devices at your desk by cable, every available port counts. Around 21% of consumers prioritise extra LAN ports. |
| Space and noise |
Check the dimensions, mounting options and the stated fan configuration. |
If the switch is right next to your phone, make sure it fits your available space and has a suitable fan configuration. Around 14% of consumers prioritise saving space and keeping things quiet. |
Common buying mistakes
-
Buying PoE+ without checking the total budget
The power available per port and the shared PoE budget are two different limits. For the D-Link DGS-1005P Revision B, the manufacturer specifies up to 30 W per PoE port and 60 W in total.
Add up the power requirements of all devices that will be powered at the same time, and check the limit for each individual port too.
-
Confusing general QoS with a Voice VLAN policy
QoS specifications don’t automatically confirm that a Voice VLAN or LLDP-MED is configured. Cisco describes LLDP-MED as a way to communicate a VLAN ID to a phone using a configured network policy.
Ask your office IT team about the specific requirements, then check that the exact switch model supports them.
-
Counting all five ports as device connections
The connection to your existing network also uses a port. With a five-port switch, you’ll have a maximum of four direct connections left for other devices after the uplink.
Before buying, count the uplink, phone and any other wired devices individually.
Key brands at a glance
D-Link
The DGS-1005P Revision B is a compact, fanless, unmanaged PoE+ option for a desk with an IP phone.
- D-Link Germany lists five Gigabit ports, including four PoE+ ports, a total budget of 60 W and up to 30 W per port.
- The documented specifications don’t confirm support for a configurable Voice VLAN.
NETGEAR
The GS305EP is designed for small workspaces that need VLAN and QoS settings as well as PoE.
- The NETGEAR datasheet lists five Gigabit ports, four PoE+ ports and a total budget of 63 W.
- The listed VLAN and QoS features don’t automatically confirm LLDP-MED support for this model.
TP-Link
TP-Link Germany documents both the TL-SG105, which has no stated PoE output, and the TL-SG1005P V5 PoE+ switch.
- TP-Link lists five Gigabit ports and a fanless case for the TL-SG105. The TL-SG1005P V5 is listed with four PoE+ ports.
- The stated total PoE budget for the TL-SG1005P varies between the German product pages. Check the hardware version and the specifications for the specific device on offer.
Zyxel
The GS1200-5HP v2 is part of a five-port, web-managed PoE range. Check that its management features meet your specific needs.
- Zyxel’s manual covers several models and notes that not every model supports all firmware features. So don’t assume the series supports a phone feature you need based only on a general menu illustration.
Joybuy products for your office desk
These switches suit different small office setups, from a phone with a separate power supply to PoE and managed VLAN features.
No image available
Ubiquiti UniFi Switch Flex Mini USW-FLEX-MINI-EU
For a desk where the phone has a separate power supply and VLAN management is required.
Five Gigabit network ports. PoE powers the switch; this model does not provide PoE output to connected devices. VLAN support and UniFi Network Management are listed.
View at Joybuy
No image available
D-Link DGS-1005P/E
For a compatible VoIP phone that needs power over Ethernet, provided the available power meets the phone’s requirements.
Five Gigabit ports, including four PoE+ ports; up to 30 W per port and a stated total budget of 60 W. Described as a fanless desktop switch. Check the exact hardware version if the revision matters for your network requirements.
View at Joybuy
No image available
D-Link DGS-1210-10/E
For desks that need several wired devices and a Voice VLAN. Check that the management features and number of ports suit your setup.
Eight Gigabit RJ45 ports and two SFP slots. Voice VLAN, VLAN management and QoS features are listed in the product description. PoE output is not specified for this product.
View at Joybuy
No image available
TP-Link TL-SG1005D
For a phone with its own power supply and extra wired connections, when you don’t need to configure the switch.
Five Gigabit RJ45 ports. Plug-and-play operation is listed, and the model is described as a fanless desktop switch. PoE output is not specified in the product details.
View at Joybuy
No image available
TP-Link TL-SG105PE
For a compatible PoE phone when you also need VLAN or QoS settings at your desk.
Five Gigabit ports, including four PoE+ ports; up to 30 W per port and a stated total budget of 65 W. VLAN and QoS settings via the web interface are described. Listed as a fanless switch with desktop or wall mounting options.
View at Joybuy
Frequently asked questions
Can I connect a VoIP phone to a switch without PoE?
Yes, for a data connection, as long as the phone has a suitable separate power supply. If you want to power it over the network cable, the connected port must provide the required PoE standard and power.
How do I connect a small switch?
Connect one port to your existing office network and another to your phone. If you’re using PoE, the phone must be connected to a PoE port. Also take your phone system’s network requirements into account.
Do I automatically need a managed switch for a Voice VLAN?
If your IT team requires you to configure the switch at your desk, you’ll need a model with the specific features they require. The NETGEAR datasheet lists VLAN and QoS for the GS305EP. Check separately whether your setup needs LLDP-MED and whether the model supports it.
What power supply and service should I check before buying?
Check which power supply comes with the switch and whether your phone needs its own. Compare the warranty terms and the service provider for the specific offer, rather than relying on details for a different model.