Vinyl listeners
If you want to connect your turntable, first check whether it outputs a phono or line signal. KEF says the Coda W has a built-in MM phono preamp.
Choose speakers to suit your music source first. A turntable needs a compatible phono or line connection, while digital albums can also be played through a compact Wi-Fi or Bluetooth speaker. If you want to enjoy stereo properly, consider two separate speakers, as long as you have enough space and can accommodate the wiring. Adapters, proximity to walls and consideration for your neighbours can also affect your choice.
If you want to connect your turntable, first check whether it outputs a phono or line signal. KEF says the Coda W has a built-in MM phono preamp.
If you mostly listen to albums on your smartphone or through a streaming service, decide whether one speaker is enough or whether you’d like to set up two for stereo. Sonos explains that you can add a second Era 100 SL to create a stereo pair.
If you want to use two separate speakers in a small living room, measure the space available and plan for the connection between the speakers. Proximity to walls and neighbours can also affect where you place them.
If you want to listen to soul albums in a small living room, the right solution depends mainly on your source, how you want to listen and how much space you have.
| Buying priority | What to check | Who should consider this? |
|---|---|---|
| Connecting a turntable and other sources | Check that your turntable’s output and cartridge are compatible with the speaker’s phono or line input, and factor in any cables you’ll need. | If I want to keep using my turntable, its output needs to match the speaker input. Around 31% of consumers are likely to consider the right connection their most important buying priority. |
| Playing digital albums | Check your music source and how you want to play it, such as via Bluetooth, Wi-Fi or a wired input. If you’re using Wi-Fi, bear the initial set-up in mind too. | If I mainly listen to digital albums, I want to use my preferred source without needing unnecessary extra devices. Around 31% of consumers are likely to prioritise digital playback. |
| Balancing stereo sound and space | Allow room for both speakers and plan for power and connection cables. Consider whether they’ll be positioned close to a wall. | If I want to listen to stereo from a fixed spot, I need room for two speakers without making the room feel cluttered. Around 23% of consumers are likely to prioritise stereo and speaker placement. |
| Enjoying your music while being considerate of neighbours | Check that the volume and sound settings are easy to access day to day, and take your living situation and any applicable house rules into account. | If I live somewhere where noise carries easily, I want to be able to control playback in everyday use. Around 15% of consumers are likely to put consideration for their neighbours first. |
A phono signal on its own is not the same as a line signal. You may therefore need an additional phono stage to connect to a standard line input.
Check your turntable’s output, cartridge and speaker input as parts of the same signal chain.
Depending on the connection, you may also need a compatible phono stage and cables.
The Sonos Era 100 SL needs Wi-Fi and the Sonos app for initial set-up. Some active stereo pairs also need a cable connecting the two speakers.
Before buying, check the set-up requirements, what’s included and the full cabling needed for the specific model.
Depending on the model, you may need an input adapter, connection cable or second speaker.
A review focused on film sound doesn’t necessarily tell you how a speaker will perform for dedicated music listening. The German Environment Agency notes that noise from neighbours can also be an issue at home.
Consider the type of music playback that matters to you, where you’ll place the speakers and how loud you’ll listen.
The Coda W is designed as an active stereo pair for MM phono or line sources. The LSX II LT is a compact Wi-Fi option if you don’t need a direct analogue connection for your turntable.
The M20 is an active stereo pair for line sources and Bluetooth, if you don’t need a built-in Wi-Fi streaming client.
The Ultima 25 Aktiv, as tested, is an active pair of bookshelf speakers for music and TV via HDMI ARC. Check the exact model generation when choosing.
The Era 100 SL is a compact Wi-Fi speaker for digital playback. If you like, you can pair it with a second unit for stereo sound.
The R1280DBs is a compact pair of active speakers with analogue and other digital connections.
This selection covers compact ways to play digital albums and vinyl, from portable or all-in-one systems to active and passive speaker pairs. Passive speakers need a compatible amplifier.
No image available
An option for digital albums if you’re looking for Bluetooth playback and a portable stereo system.
No image available
For a stereo pair you can position separately, with wired connections and Bluetooth.
The product title lists Bluetooth, HDMI ARC, optical, USB, AUX and RCA inputs. It also lists bass and treble controls, an LED display and a remote control.
No image available
An all-in-one option if you want to use different music sources with a single compact system.
The product title lists a turntable, CD and cassette players, radio, and USB and SD card playback. Two separate speakers are also listed.
No image available
For vinyl listeners looking for a unit with built-in speakers instead of a separate pair.
The product title lists four built-in speakers and a phono preamp.
No image available
For a compact speaker pair if you already have a compatible amplifier.
The product title lists a 4-inch woofer, a 20 mm dome tweeter, 60 Hz–20 kHz, 4 Ω and 10 W–50 W. As passive speakers, they need a compatible amplifier.
It depends on your turntable’s output and the speaker’s input. A phono signal on its own needs a compatible phono stage. According to KEF, the Coda W has a built-in MM phono input. A turntable with a line output is designed to connect to a suitable line input.
No. According to Sonos, you must first set up the Era 100 SL using the Sonos app on a Wi-Fi network. You can then use Bluetooth.
Measure the space for both speakers and plan for the connection between them. HIFI.DE lists a connection cable for the Q Acoustics M20; according to STEREO, the KEF Coda W also needs a cable connecting it to the second speaker.
Take volume, speaker placement and any rules that apply to your home into account. When discussing noise from neighbours, the German Environment Agency refers to regulations set by Germany’s states and local authorities, as well as house rules.