Making your first videos without studio lighting
For your first talking-head setup, you’ll need a light source. Check whether the lamp, softbox and stand are all included. The documented NEEWER 660 two-light kit lists each of these components twice.
If you don’t already have video lighting, a complete continuous-light kit with a matching softbox and stand is a sensible place to start. A standalone softbox only shapes the light from a compatible lamp you already own. If space is tight, pay particular attention to the footprint of the assembled light and the room needed for the stand. Test the lighting and sound with a short clip at the spot where you’ll actually be filming.
For your first talking-head setup, you’ll need a light source. Check whether the lamp, softbox and stand are all included. The documented NEEWER 660 two-light kit lists each of these components twice.
If your desk and floor space are already in use, compare the dimensions of the assembled softbox and stand with the space where you’ll be filming. According to amaran, the Light Box is available in sizes including 45 × 45 cm; this measurement alone doesn’t show the full footprint when used with a stand.
If you want to soften the light from your existing continuous light, the modifier must fit its exact mount or panel model. The amaran Light Box uses a Bowens mount, while the separate NEEWER diffuser is designed for the specified 660 panel.
A good fit if: you want to get started with a lamp, softbox and stand, and don’t already have studio lighting.
The trade-off: The documented NEEWER kit includes two lamps and two stands, which take up space.
A good fit if: you already have a compatible lamp and want to add a matching light modifier.
The trade-off: A lamp and, in some cases, a stand aren’t automatically included; make sure the mount and model are compatible.
A good fit if: you want to put together your own lamp and modifier setup or swap components later.
The trade-off: A compatible mount doesn’t guarantee that the stand, load capacity and included items will suit your setup.
A good fit if: there’s hardly any room for an open softbox and stand where you film, and you’re happy with the look of a panel.
The trade-off: A small diffuser isn’t the same as a larger softbox; check shadows and reflections in the camera image.
| Criterion | What to check before buying | Who it matters most to |
|---|---|---|
| Soft, controllable light on your face | Check the size, diffusers and any grid, as well as the space needed to position a light to the side and slightly above you. Rollei describes a medium-sized rectangular softbox as one way to create soft light on the face. | If I want to avoid harsh facial shadows and control spill light in talking-head videos, the quality of the light comes first for me. Around 28% of consumers would make soft, controllable light on the face their top priority. |
| Footprint and storage | Compare the assembled dimensions and the stand’s footprint with the actual space where you’ll be filming. Rollei lists one version as 60 × 90 cm; the stand needs extra room. | If I want to use the setup in a small room and put it away afterwards, every bit of free space where I film matters. Around 22% of consumers would prioritise the available floor space. |
| Complete set of included items | Check the parts list for a lamp, softbox, stand and power supply. NEEWER lists these components for its documented 660 two-light kit; a separate diffuser isn’t a light. | If I don’t want to buy essential components separately for my first lighting setup, what’s included is crucial. Around 22% of consumers would prioritise a setup they can use without having to buy extra essential components unexpectedly. |
| Adjusting to daylight and room lighting | Compare the colour temperature specifications for the exact lamp model and check how it looks with your camera and room lighting. NEEWER lists 3200–5600 K for the lamps in its 660 kit; Godox lists 2800–6500 K for the SL60IIBi. | If daylight and room lighting change while I’m filming, I want to be able to adjust the lighting to suit. Around 17% of consumers would make adapting to changing light their top priority. |
| Sound when recording speech | Check the cooling specifications for the exact lamp and record a sound test clip from your planned filming position, with your microphone in place. Manufacturer descriptions can’t replace testing the setup in your own room. | If I’m recording speech, I want to avoid the lighting interfering with the sound. Around 11% of consumers would make quiet operation their top priority. |
A standalone softbox or diffuser doesn’t produce light by itself. The parts list for the documented NEEWER 660 two-light kit, by contrast, includes lamps and stands.
Before buying, check the full parts list rather than relying on the product image or title alone.
With a standalone light modifier, you’ll need to budget separately for a compatible lamp and, if necessary, a stand.
The Bowens softboxes researched and the NEEWER diffuser designed for the 660 panel use different types of fitting.
Check the mount against the full model name of the light you already own.
An incompatible modifier may mean you need a suitable adapter or a different product.
Godox gives the illuminance figures for the SL60II models measured at 1 m with a standard reflector. This doesn’t show how bright the light will be with a separately chosen softbox.
Don’t assume manufacturer figures will apply to your setup; check the light and shadows in a test shot.
The documented Rollei version measures 60 × 90 cm when assembled, and its stand takes up extra space.
Measure the available space where you’ll be filming and allow room for the stand to be positioned safely.
Documented 660 LED products range from kits with lamps, softboxes and stands to a separate diffuser for a specific panel.
The Light Box range includes separate Bowens light modifiers, including a 45 × 45 cm version.
The SL60II continuous lights are designed for a setup assembled separately, using a Bowens mount.
The range includes click-open softboxes with a Bowens S-Type mount, including a documented 60 × 90 cm version.
KE-Quickly-Open softboxes are light modifiers with a Bowens S-Type mount, designed for compatible LED continuous lights.
Not if the listing is for the passive light modifier alone. Check whether a lamp, compatible mount, power supply and stand are included; the separately described NEEWER 660 diffuser doesn’t include a lamp.
As a starting point, position the softbox to the side and slightly above the person’s face, then check the camera image. Rollei describes positioning it about 45 degrees to the side as one option for portrait lighting, not a mandatory angle for every room. Secure the setup with a suitable stand.
Record a short clip with speech from the spot where you’ll be filming, then check the shadows, colour temperature and any noise from the lamp. Position the light and microphone to suit your setup, and follow the device instructions when assembling and cleaning it.
In general, statutory consumer rights claims are made against the seller and cover faults that were present when the goods were handed over. The Verbraucherzentrale says the period is two years from delivery; a voluntary manufacturer’s guarantee is separate and is subject to its own terms.
CE marking is required for products when the relevant EU rules for that product group say it is. The European Union explains that CE marking isn’t a general requirement for every product; the Bundesnetzagentur also says that the required accompanying information must be in German. A passive softbox shouldn’t automatically be assessed in the same way as an electric light.
No. The Umweltbundesamt says that electrical and electronic waste in Germany must be collected separately, including through local authority collection points. This disposal requirement applies to the electric light, not automatically to every passive fabric light modifier.