Which option is right for you?

Photographing prints behind glass

If there’s glass or acrylic in front of the print, check the light position in a test shot so that reflections cover as little of the image as possible. The Smithsonian Institution Archives describe diffused light as one way to reduce glare; Nikon also highlights reflections on glass.

Sellers with lots of framed prints

For consistent full-frame shots against white, decide whether you need a complete two-light kit or want to add to the equipment you already own. BRESSER lists two lights, softboxes and stands in its BR-60S kit; Adobe explains how white balance affects colour appearance.

Photographers with an existing studio light

If you already have a suitable light, check the mount and what’s included before buying a single light modifier. NEEWER and Aputure specify Bowens mounts for the rectangular softboxes featured here.

What should you look for when buying?

Complete kit with two continuous lights

A good fit if: You don’t yet have studio lights and want to illuminate the print from both sides. BRESSER lists two 60 W lights, softboxes and stands in the BR-60S kit.

Consider: Lights and stands need space, and if the print is behind glass, you’ll need to experiment with their positions around the frame.

A single softbox for lights you already own

A good fit if: You already have a compatible light and stand and mainly want to add a light modifier. The NEEWER SB-BW6090 and Aputure Light Box 60x90 are rectangular Bowens models measuring 60 × 90 cm.

Consider: A single softbox isn’t a complete lighting kit, and it can’t guarantee reflection-free shots of prints behind glass.

Choose a light and modifier separately

A good fit if: You want to choose a light and softbox separately, or add to your setup over time. Godox lists a Bowens mount and 2,800–6,500 K for the SL60IIBi.

Consider: Check the mount, stand and what’s included for each component. According to the manufacturer, the Godox maximum of 25,100 Lux applies at 1 m with the standard reflector, not a softbox.

Priority What to check when buying Who is it important to?
Reflections on glass Try different light positions with the actual frame; diffused light alone won’t reliably prevent reflections. When photographing a print behind glass, I want to keep the image visible despite reflections and assess the light source in a test shot. Around 36% of consumers put reflection control first.
Even lighting and white Check the brightness across the entire print and adjust the white balance to suit the lighting you’re using. For repeat shots against white, I want the print, frame and background to look evenly lit. Around 29% of consumers prioritise consistent reproduction.
Mount and what’s included Check your light’s mount and whether the light head and stand are included. According to the manufacturer, they’re not included with the NEEWER SB-BW6090. When adding to my existing studio equipment, I want a compatible mount and all the parts I need to set up. Around 21% of consumers prioritise compatibility and what’s included.
Space required Allow for the setup depth and stand position, not just the width and height. Aputure lists a depth of 53 cm for the assembled Light Box 60x90. When space is limited, I want to be able to set up the camera, frame, background and lights together. Around 14% of consumers put available setup space first.

Common buying mistakes

  • Assuming a light modifier is a complete lighting kit

    A softbox shapes the light, but it doesn’t necessarily include a light or stand. According to the manufacturer, the NEEWER SB-BW6090 doesn’t include a light head or stand; the BRESSER BR-60S kit lists lights and stands.

    Compare what’s included with the specific version against the equipment you already own.

  • Assuming soft light means no reflections on glass

    Even a diffused light source can appear as a bright reflection on a reflective surface and obscure parts of the print.

    Test the lighting with the actual frame and adjust the light position before settling on your final setup.

  • Comparing Lux figures without checking the test conditions

    Godox’s stated maximum for the SL60IIBi was measured at a distance of 1 m with the standard reflector. It doesn’t describe the brightness with a softbox attached.

    Assess the lighting where you plan to shoot, and only compare readings taken under the same conditions.

  • Considering only width and height when planning your space

    According to the manufacturer, the assembled Aputure Light Box 60x90 is 53 cm deep. The light and stand also need space, and you’ll need to be able to adjust the light position around the frame.

    Plan the full setup, including the camera and background, before deciding how much space you have available.

Brands to consider

BRESSER

The BR-60S COB LED Daylight Set is aimed at beginners without existing studio lights; BRESSER lists two 60 W lights, softboxes and stands.

  • The listed kit contents can make it easier to plan a setup with two light sources.
  • The manufacturer’s specifications don’t confirm that a particular framed print behind glass can be photographed evenly or without reflections.

NEEWER

The rectangular 60 × 90 cm SB-BW6090 is a light modifier for a suitable Bowens light you already own.

  • The listed contents include inner and outer diffusers, plus a Bowens ring.
  • According to the manufacturer, the SB-BW6090 doesn’t include a light head or stand; this applies to this model.

Aputure

The Light Box 60x90 provides a rectangular light source for a suitable Bowens light, with two front diffusers and a grid.

  • Aputure lists 1.5 or 2.5 stops of diffusion for the front panel.
  • According to the manufacturer, the assembled softbox is 53 cm deep; the specifications don’t confirm that a light is included or that it will eliminate reflections in print photos.

Godox

Godox lists the SL60IIBi as a Bowens light and offers rectangular softboxes in the SB-FW range.

  • Godox lists a colour temperature range of 2,800–6,500 K for the SL60IIBi.
  • According to the manufacturer, the maximum of 25,100 Lux applies at 1 m with the standard reflector, not a separately selected softbox.

COLBOR

The BP65 is a 65 cm parabolic light modifier with a Bowens mount and grid, for use with suitable lights you already own.

  • COLBOR lists directional light control and a carry bag.
  • The round BP65 produces a different light shape from a rectangular 60 × 90 cm softbox; the listed specifications don’t state that a light is included.

Related products at Joybuy

This photo box is designed for product photography with soft light and a white background. It isn’t a separate softbox light for a setup around a framed print, so check whether your frame will fit in the intended shooting area.

Foldable portable photo box with soft-light cloths, coloured backgrounds and adjustable brightness

Foldable portable photo box with soft-light cloths, coloured backgrounds and adjustable brightness

The photo box may suit smaller product shots with soft lighting; check whether your framed print will fit in the intended shooting area.

The product name specifies soft-light cloths, coloured backgrounds and adjustable brightness.

View at Joybuy

Frequently asked questions

Is softbox lighting enough to prevent reflections on glass in front of a print?

No, there’s no guarantee. The Smithsonian Institution Archives describe diffused light boxes as one way to reduce glare, but the lighting still needs to suit the reflective subject. Check for reflections on your frame in a test shot and adjust the light position.

How can I keep the white background and print colours consistent in my photos?

Set the white balance to suit the lighting you’re using, then check the result in a test shot. Adobe explains that different light colours affect how colours appear, making white look bluish or yellowish, for example.

What should I check before buying a single softbox?

Check that the mount is compatible with your light and find out exactly what’s included. The listed contents of the NEEWER SB-BW6090 include inner and outer diffusers and a Bowens ring, but not a light head or stand. Follow the manufacturer’s instructions when setting it up and packing it away.