Start with a test recording at the table where you’ll be filming, then choose between the window light you already have, a complete continuous-light kit or a light modifier for a suitable lamp. If you don’t have a lamp or stand, a kit that includes both could be a good option; if you have a compatible lamp, a standalone light modifier may be all you need. For example, Rollei specifies a Bowens mount for its Quick-Fold Softbox. Allow space for the stands and camera, too, and bear in mind that the direction and quality of daylight can change, as Canon Europe notes.
Which lighting is right for you?
Origami teachers without video lighting
If you regularly film folding steps, you’ll need a suitable light and a secure setup as well as a softbox. NEEWER lists two LED bulbs and two stands as included with the NK103; a test recording will show you how the light looks on your folding surface.
Filming in a small space
If you need to put the lights and stands away after filming, make sure you allow space for the whole setup alongside your table and camera. Rollei describes its 45 cm Quick-Fold Softbox as foldable, but still check how much room the compatible stand will need.
Filming with a light you already own
If you already have a continuous light, a compatible modifier can diffuse the light across the paper. Before buying, check the mount and what’s included with the specific model. Rollei and amaran both specify Bowens mounts for the modifiers described here.
What should you look for when buying?
Don’t choose based on softbox diameter alone. Check how your hands, paper and fold lines look on camera, and whether the whole setup will fit in your room.
| What to consider |
What to check before buying |
Who should consider it? |
| Shadows on the folding surface |
Make a test recording with your hands in typical folding positions; check the light’s position and whether you may need to add fill light. |
If my hands cast shadows on the surface, I still want to be able to see the paper and fold lines. For around 33% of consumers, this is the most important thing to consider when buying. |
| Space for the setup |
Check where the light, stand and camera will go and how much floor space they need, as well as where you’ll store them after filming. |
If I need to keep the table and walkways clear, the space the whole setup takes up matters. For around 27% of consumers, available space is the main consideration. |
| Colours and video |
Film the paper under the final lighting; check the white balance and for flicker using your planned camera settings. |
If I want the paper colours to look consistent in teaching videos, I test the lighting and camera together. For around 20% of consumers, video and colour consistency are the main concerns. |
| What’s included and the mount |
Check whether a light and stand are included; if you’re buying individual components, make sure the mount is compatible with your existing equipment. |
If I’m still missing a light or stand, I want to know whether the offer gives me everything I need for a complete setup. For around 20% of consumers, missing equipment is the most important thing to consider when buying. |
Common buying mistakes
-
Assuming a standalone light modifier is a complete video light
A softbox without a light source won’t illuminate the paper. A kit and a standalone modifier may include different components.
Compare the contents of the specific offer with the equipment you already have.
-
Choosing based on softbox diameter alone
The NEEWER NK103 reviewed here includes two stands. In a student room, you’ll also need space for your table, camera and walkways.
Before buying, plan where you’ll put every part of the setup and where you’ll store it after filming.
-
Confusing a Bowens mount with a lamp holder
The Rollei Softbox reviewed here uses a Bowens mount, while NEEWER specifies an E27 fitting for the bulbs in its German NK103 model. These refer to different types of connection.
Check the full model and mount details rather than relying on the word ‘softbox’ alone.
Brands to consider
NEEWER
The NK103 reviewed here is a kit for anyone who doesn’t yet have suitable video lighting.
- NEEWER says the NK103 includes two 60 × 60 cm softboxes, two bi-colour LED bulbs and two stands.
- Two lighting positions need floor space, so check they’ll fit alongside your table and camera.
Rollei
The 45 cm Quick-Fold Softbox is a light modifier for a compatible lamp you already own.
- Rollei specifies a Bowens mount, a honeycomb grid and a foldable design.
- The modifier doesn’t produce light on its own. Check that it suits your table and existing equipment before buying.
amaran
According to the manufacturer, the Light Dome Mini SE is a Bowens light modifier for a compatible lamp you already own.
- Aputure specifies a Bowens mount, quick assembly and included diffusion fabrics.
- The optional control grid is sold separately, and the Light Dome Mini SE isn’t a complete lighting kit.
Godox
The SL60IIBi is a dimmable bi-colour continuous light with a Bowens mount, designed for a modular setup.
- Godox specifies a colour temperature range of 2800–6500 K and Bowens compatibility for the SL60IIBi.
- The stated maximum illuminance was measured at a distance of 1 m with the standard reflector, so it doesn’t indicate brightness with a softbox. You’ll need to choose a modifier and plan a secure setup separately.
Joybuy products
Related products will be available soon.
Frequently asked questions
Do I need a light as well as a standalone softbox?
Yes, if the offer only includes the light modifier. NEEWER lists LED bulbs and stands as included with the NK103, while Rollei describes the Quick-Fold Softbox as a standalone modifier. Check the details of the specific offer.
How should I set up the light for an overhead shot?
Start by filming the whole folding surface, moving your hands as you would while teaching. If one side looks too dark and there’s enough light coming in through the window, a white card can reflect light back onto that side. Canon Europe describes this technique for product photography. Otherwise, try adding another light in a suitable position.
What can I do if white paper looks yellowish or the video flickers?
Set the white balance to suit your final lighting and test the light with your camera settings. Using certain lights and the Z 30 as an example, Nikon explains that flicker can be affected by the shutter speed, frame rate and frequency of the light.
What should I bear in mind when using a mains-powered light in a small room?
Follow the instructions for your specific device and route the cable so it won’t be in a walkway or at risk of damage. Godox warns that poorly routed power cables and contact with hot parts can be hazardous when using its LED lights; for other models, follow their own instructions.
Does a video light need to carry a CE mark?
Whether a particular light needs a CE mark depends on the EU product rules that apply to it. The EU explains that the CE mark is the manufacturer’s declaration that a product complies with the applicable rules; it isn’t an independent endorsement of light quality. Check the specific product and its electrical components.