For a short recipe introduction filmed in one place, a single continuous light with a suitable softbox is a sensible starting point, as long as you can see both your face and the food clearly in a test shot. A second light gives you more options for filling in shadows, but needs another safe spot to stand. If the room and window light change, adjustable colour temperature makes it easier to adapt, but it doesn’t replace setting the camera’s white balance correctly.
Which solution is right for you?
Recipe videos in a tight space
If you’re filming at a small table, allow room for the softbox, stand and cables, and think about where you’ll store everything after filming. BRESSER highlights the importance of mounting light modifiers safely, so measure the space where you plan to set everything up.
Your face and food in the same shot
If you switch between speaking to camera and filming ingredients, check your face, the food and any shadows together in a test shot. Adobe explains that the camera’s white balance affects the colours in your video.
Filming in changing room light
If you film at different times of day, adjustable colour temperature can help you adapt the light. NEEWER and Godox both list adjustable colour temperature ranges for the Bi-Colour models described here. You’ll still need to set your camera’s white balance to suit the scene.
What should you look for when buying?
First, check that the light, softbox and stand will fit safely in your room and suit the shot you have in mind. Then compare colour control, what’s included and any potential noise to make sure they suit your filming needs.
| What you need |
What to check before buying |
Who should pay particular attention |
| Soft light for your face and food |
Check the softbox’s diffusion surface and mount; assess the light position and shadows in a test shot. |
If I want to show myself and the ingredients together, I want to avoid harsh shadows in the shot. Around 28% of consumers are primarily looking for soft, even lighting on both. |
| Space to set up and store your kit |
Consider how many stands you’ll need and the softbox’s assembled dimensions. |
With little space beside the table and camera, I need a setup that I can position safely and put away after filming. Around 22% of consumers prioritise space for setup and storage. |
| Colour control in changing light |
Check whether the colour temperature is adjustable; check the white balance and a test clip under your planned lighting. |
If the window and room lighting change depending on when I film, I want to match the light colour and camera white balance to the scene. For around 22% of consumers, colour control is the top priority. |
| Everything you need included |
Check that the light, compatible modifier, stand and power supply are included; if you plan to use a battery, check whether that’s included too. |
If you want to get started with as few separate parts as possible, check in advance that everything you need for your setup is included. Having a complete starter setup is the main priority for around 17% of consumers. |
| Audio while recording speech |
Check the fan noise information for the specific model and listen to a test clip at the light level you plan to use. |
If I’m speaking during the introduction, I want to identify any fan noise in the recording before committing to the setup. Quiet operation is a priority for around 11% of consumers. |
Common buying mistakes
-
Assuming a softbox is a complete lighting kit
A light modifier such as the Aputure Light Box 45x45 isn’t a light. For a ready-to-use setup, you’ll also need to consider the light itself, a compatible mount and a stand.
Check the components you need against the contents of the exact listing, and make sure the softbox is compatible with the light.
-
Comparing only the light’s output
A kit with two 65-cm octaboxes needs a different amount of space from a 45 × 45 cm softbox. Even a compact softbox can extend quite a way out when assembled.
Measure the space available and the distance to your subject with the softbox set up. Also plan safe positions for your kit and routes for the cables.
-
Assuming adjustable Kelvin settings will automatically give you true-to-life food colours
Adjustable colour temperature alone won’t determine how white and other colours appear in the finished video. The camera’s white balance affects colour too.
Set the white balance for the actual scene and check a test clip with the light sources you’ll have switched on while filming.
-
Taking claims about battery power or quiet operation at face value
Batteries aren’t included with the described NEEWER 660 kit, despite battery power being listed as an alternative. Godox describes the SL60IIBi as quieter than its predecessor, but that doesn’t mean it will be silent where you’re filming.
Check the power supply you’ll need and listen to a speech recording made with the specific model in the conditions you plan to use it in.
Key brands and product ranges
BRESSER
The BR-2860 is a documented two-light set with LED lights, stands and 65-cm octaboxes.
- BRESSER says the set includes two stands and light modifiers; the stated colour temperature is 5400 K.
- No adjustable colour temperature range is listed. Two lights set up at once will need space.
NEEWER
The documented 660 Bi-Colour two-light kit combines lights, softboxes, stands and power supplies.
- NEEWER says you can adjust the colour temperature from 3200 to 5600 K and the brightness from 0 to 100%.
- Batteries for the alternative battery-powered operation mentioned aren’t included.
Godox
The SL60IIBi is a modular Bi-Colour COB continuous light with a Bowens mount for separately selected light modifiers.
- Godox lists an adjustable colour temperature range of 2800 to 6500 K and a Bowens mount.
- The manufacturer’s claim of reduced fan noise isn’t an independent test of how quiet it will be in your room. The listed light specifications don’t confirm that a softbox and stand are included.
Aputure
The Light Box 45x45 is a compact Bowens softbox for use with a compatible light you already own.
- Aputure lists a 45 × 45 cm lighting surface, a depth of 30 cm, diffusion cloths and a grid.
- The softbox is described as a light modifier, not a light. Check that its mount is compatible with the specific light you choose.
SmallRig
According to its user manual, the RA-R4545 mini is designed for compatible SmallRig RC-60 and RC-100 lights.
- SmallRig lists dimensions of 45 × 45 cm and includes diffusion.
- The manual doesn’t describe a complete light. If space is tight, check the exact product dimensions and compatibility before buying.
Joybuy products
Products to suit you will be available soon.
Frequently asked questions
How should I position the light for my face and food?
Start with a continuous light set up securely to one side, then check your face, ingredients and shadows together in a short recording. If the opposite side looks too dark and you have another safe place for a stand, you could add a second light to fill in the shadows.
Can I attach any softbox to any video light?
No, the mount must be compatible with the specific model. The Aputure Light Box 45x45 uses a Bowens mount; the separately available NEEWER softbox is designed for the 660 LED panel. Also check that it can be attached securely and what’s included.
What should I do if the window and room light have different colour temperatures?
Set the camera’s white balance to suit the light sources that will actually be on while you’re filming. If the lighting conditions change often, a Bi-Colour model gives you extra settings; a light with a fixed daylight colour temperature doesn’t offer this adjustment.
How can I protect my light and stand when filming with food?
Set the stand up securely and keep electrical parts and cables away from splashes and wet work surfaces. BRESSER specifically warns against unstable mounting and moisture for one of its light modifiers; follow the instructions for the specific model you’re using.
What compliance should I check for an electric video light?
For the specific electric LED light, check which EU regulations apply and whether they require CE marking. The European Union explains that CE marking is only compulsory for products where the relevant EU rules require it. Germany’s Federal Network Agency checks lighting products for details including product identification and manufacturer information. A passive softbox with no electrical components doesn’t need to be labelled simply because it’s a softbox.