Which lighting setup is right for you?

Soldering videos in a small filming space

If you want to keep your hands and workpiece in shot, but can’t leave several stands set up in a shared room, directional, dimmable lighting and a setup that’s easy to put away are important things to consider.

Soldering videos with live audio

If you’re talking through your process at your workbench, consider possible fan noise and stray light. The manufacturer’s noise specifications are no substitute for a test recording with your microphone.

Adding to a light you already own

If you already have a video light, check the mount and what’s included before buying a separate modifier. According to SmallRig’s instructions, the SmallRig RA-D60 mini is designed for RC-60 and RC-100 lights.

What should you look for when choosing?

Complete kit with two panel lights

A good choice if: You need lights, modifiers and stands, and can fit two lighting positions into your space. According to NEEWER EU, the NEEWER 660 kit includes these components.

The trade-off: Two stands take up more space and mean dealing with extra cables.

Single COB light with softbox

A good choice if: You want to use just one lighting position and adjust the output or direction as needed. According to their respective manufacturers, the Godox SL60IIBi and amaran COB 60x S are dimmable lights with Bowens mounts.

The trade-off: You may need to choose the light, a compatible modifier and a sturdy stand separately. Brightness figures measured with a standard reflector don’t necessarily reflect the results you’ll get with a softbox.

Separate modifier for a light you already own

A good choice if: You already own a light that’s explicitly listed as compatible. According to the instructions, the SmallRig RA-D60 mini is designed for RC-60/100 lights.

The trade-off: A softbox doesn’t produce light by itself. The model, mount and what’s included all need to suit your existing equipment.

Priority What to check before buying Who is this especially important to?
Visible solder joint Dimming and diffuser; check for reflections from your own camera angle. If I want to show the soldering iron tip, my hands and small components at the same time, the details need to remain visible without reflections distracting from the picture. That’s why around 36% of consumers put a clearly visible solder joint first.
Space and sharing the room Stand footprint and cable routing; check whether you can put the setup away after filming. If I share the room, I want to position the lights and cables so that walkways stay clear and I can pack everything away again. Around 29% of consumers place the greatest importance on space and sharing the room.
Audio recording Check the specifications for the exact model and make a test recording with your microphone. If I record explanations at my workbench, I want to check for possible operating noise with my microphone first. Around 21% of consumers prioritise clear spoken audio with as little disruption as possible.
Compatible add-on Check the approved models and mount; make sure the light and any necessary accessories are included. If I already own a light, I want to choose a modifier that genuinely fits it. Around 14% of consumers prioritise compatibility when adding to their setup.

Common buying mistakes

  • Buying just a softbox when you need a complete light

    A separate modifier doesn’t produce light by itself. According to NEEWER, its panel softbox doesn’t come with a light; the documented two-light 660 kit, on the other hand, includes lights and stands.

    Check the full model name, mount and what’s included against the equipment you already own.

  • Assuming lux figures with a standard reflector apply to a softbox

    Godox gives figures for the SL60IIBi at a distance of one metre with a standard reflector. This test condition doesn’t necessarily reflect a setup with a softbox attached.

    Only compare figures measured at the same distance and with the same modifier, and use a test recording to assess how the solder joint is lit.

  • Overlooking soldering safety when planning your lighting

    Video lighting doesn’t reduce soldering fumes or the risk of burns or cable-related accidents.

    The DGUV recommends avoiding inhalation of soldering fumes, keeping your distance and ensuring good ventilation. Plan the soldering stand and cable routing separately from your lighting setup, and keep walkways clear.

Relevant brands and product ranges

NEEWER

The documented Bi-Color 660 two-light kit combines panel lights, softboxes and stands. It’s worth considering if you’re looking for a complete setup and have room for two lighting positions.

  • NEEWER EU describes the panels as dimmable and fanless; this isn’t an independent test of sound or performance.
  • Batteries aren’t included in the kit described; two stands also need space.

Godox

The SL60IIBi is a dimmable Bi-Color COB light with a Bowens mount, designed for a setup using a separately selected modifier.

  • Godox gives the SL60IIBi a colour temperature range of 2800–6500 K.
  • The stated lux figure is measured at one metre with a standard reflector, not a softbox. Check whether the specific listing includes a softbox and stand, and consider the noise level where you’ll be filming.

amaran

The COB 60x S is a Bi-Color light with a Bowens mount, for a single-light setup put together with compatible accessories.

  • The mount lets you choose compatible modifiers from the Bowens system.
  • According to the amaran Help Center, accessories fitted to this model must be no more than 85 cm and 2.5 kg. Check that your chosen modifier meets these limits.

SmallRig

The RA-D60 mini is a separate, foldable modifier for the RC-60/100 lights listed in the instructions.

  • SmallRig’s instructions describe an inner and outer diffuser, as well as a grid.
  • The instructions don’t list a light source as part of the product; compatibility with other mounts or lights isn’t automatic.

Suitable products on Joybuy

Related products coming soon.

Frequently asked questions

How should I set up the lighting for a soldering video?

Position a dimmable light with a diffuser to illuminate your hands and workpiece, then check for reflections from the camera angle you’ll actually use. A grid can help control stray light, if one is available for your chosen modifier.

Is a softbox enough to solder safely in a shared bedroom?

No. The DGUV recommends avoiding inhalation of soldering fumes, keeping your distance and ensuring good ventilation. A soldering stand and safe cable routing are important too; a video light doesn’t provide any of these safety measures.

What extra costs and legal rights should I bear in mind when buying?

Check whether the listing includes a softbox, stand and the required power supply; batteries aren’t included with the NEEWER kit described. When you buy goods from a business seller in the EU, you’re generally entitled to a legal guarantee of at least two years from the date you receive them. This is separate from any additional manufacturer’s warranty. The information on legal guarantees and warranties comes from Your Europe, the European Union’s portal.

What marking should I look for on an electric video light?

CE marking is only required for products covered by harmonised EU rules that specifically require it. The German Federal Network Agency also lists a German-language instruction manual with the necessary usage and warning information as something to check. A passive softbox can’t be classified as requiring CE marking simply on the basis of its name.