Families without a computer to hand
You want to view your negatives as you pack and save them to a card, rather than set up a PC workstation. reflecta documents JPEG saving to an SD card for the x33-Scan.
A standalone scanner is a good fit if you want to browse your negatives during the move without a computer to hand and save them straight to an SD card. A computer-connected film scanner may suit you better if you have a computer and compatible software ready, and want control over the scanning and file-handling process. First, check which film formats are in your collection, then consider the quantity: the holders need to fit, and the strip capacity determines how often you’ll need to reload. For a family archive, the Library of Congress recommends keeping copies on at least two different storage media in separate locations.
You want to view your negatives as you pack and save them to a card, rather than set up a PC workstation. reflecta documents JPEG saving to an SD card for the x33-Scan.
You’ll need to weigh up repeated loading and the number of frames captured per pass against scanning control and image checking. F.A.Z. Kaufkompass reports that the Plustek OpticFilm 135i can scan a maximum of six strip frames per pass.
Alongside 35mm film, you may have 110, 126 or 120/220 negatives, so you’ll need holders that are confirmed to fit these formats. reflecta documents a separate adapter set for 110 and 126 for the x33-Scan; Epson lists film holders for 120/220 with the Perfection V600 Photo.
| Buying priority | What to check | Who it matters most to |
|---|---|---|
| Working without a computer | Check whether the device works without a computer and which file format it saves in. Also check whether an SD card is required and included. | If I can’t set up a computer while packing, I want to view my negatives and save them straight to a card. Around 33% of consumers prioritise working without a computer. |
| Scanning lots of strips | Compare the number of frames per pass, or the supported strip length, and how often you’ll need to reload. | When I have a large pile to get through, how often I need to reload the strips matters more than scan time alone. Around 27% of consumers prioritise throughput. |
| Scanning different formats | Check each negative format against the formats explicitly supported and the holders included or available separately. | If my family’s collection includes 110, 126 or medium-format negatives, I need holders that fit them exactly. Around 20% of consumers prioritise mixed film formats. |
| Creating editable files | Check the output format and whether the resolution is native or interpolated. Also consider the software you’ll need. | If I want to edit the images later, I need a suitable file format and a workflow that works with my computer and software. Around 20% of consumers prioritise archive files they can edit flexibly. |
reflecta describes the x33-Scan’s higher maximum output as interpolated. The Library of Congress notes that choosing the right resolution is not the only consideration when digitising.
Compare the native capture and output format with how you plan to use the files. If possible, test a typical strip of negatives.
F.A.Z. Kaufkompass reports that the Plustek OpticFilm 135i can scan a maximum of six strip frames per pass. With a large collection, sorting, reloading and checking can all add time. For your files, the Library of Congress recommends organised storage and keeping separate backups.
Estimate how long the process will take based on the number and formats of your strips, not just the scan time.
Allow time to sort, name, check and back up your files too.
A separate adapter set is listed for 110 and 126 film with the reflecta x33-Scan. The EU product page for the KODAK SLIDE N SCAN lists adapters for 135, 110 and 126; the SD card needed to use it is not included.
Check your collection’s formats against what’s included with the specific model and kit.
The x33-Scan and RPS 10S offer different workflows: viewing without a computer or scanning film strips with a computer.
The OpticFilm 135i is a computer-connected scanner for 35mm film, with motorised film transport, as documented by Plustek for this model.
According to its EU product page, the KODAK SLIDE N SCAN is a standalone option for 135, 110 and 126 negatives.
According to Rollei, the DF-S 310 SE is a computer-free option for slides and negative strips.
The Perfection V600 Photo is a flatbed alternative for photographs on paper, as well as 35mm and 120/220 film.
No, it shouldn’t be your only backup. The Library of Congress recommends keeping copies on at least two different storage media in separate locations. This is also practical when moving, in case a piece of luggage goes missing.
Where possible, handle negatives by the edges or by their sleeves, and work on a clean, dry surface. The Library of Congress recommends removing loose dust with a blower rather than canned compressed air. This is a conservation recommendation, not a legal requirement in Germany.
Check that the holders fit your film formats and that any required SD card is included. A separate adapter set is listed for 110 and 126 film with the reflecta x33-Scan; the required SD card is not included with the KODAK SLIDE N SCAN, according to its EU product page.
Under the conditions set out in § 53(1) UrhG, individuals may make individual copies for private, non-commercial use. This includes the requirement that the source was not obviously made or made publicly available unlawfully. This private-copying exception does not automatically allow you to publish the images publicly: § 53(6) UrhG excludes the distribution and public communication of copies. If you want to share images online, you’ll need to check the rights to the specific image separately. The relevant text of the law is available on Gesetze im Internet, provided by the Federal Ministry of Justice and the Federal Office of Justice.