TV viewers with two speakers
You want to listen to film soundtracks and TV audio through two passive speakers. Make sure the amplifier’s connection and audio format match your TV settings.
If you want to listen to film soundtracks through two passive speakers, choose your amplifier based on the connections you need and whether it’s suitable for your speakers – not just its wattage. For TV sound, the right ARC or eARC connection and supported audio format are key. A compact streaming amplifier takes up little space, while a stereo receiver can accommodate additional HDMI sources. If you want a dedicated centre or surround speaker, a two-channel amplifier isn’t the right type of equipment.
You want to listen to film soundtracks and TV audio through two passive speakers. Make sure the amplifier’s connection and audio format match your TV settings.
You want to keep using your existing passive speakers. Check the connections and technical specifications for your particular pair. If you might add a subwoofer later, check what type it is and whether the amplifier has a suitable output.
You’re looking for a compact device for music streaming and occasional TV sound, rather than several separate components. Think about which sources you actually use and how much room you have for the amplifier and, if needed, a subwoofer.
A good fit if: you want to listen to film soundtracks through two speakers and stream music, without taking up much space.
Keep in mind: HDMI ARC or eARC and streaming don’t turn the device into a system for dedicated centre and surround speakers.
A good fit if: you genuinely want to use a centre speaker and rear surround speakers alongside your front speakers.
Keep in mind: you’ll need a different system plan, with additional speakers and space to position them.
| Criteria | What to look for when buying | Who it matters most to |
|---|---|---|
| TV connection and audio format | Check for an ARC or eARC connection on your TV, and the output format supported by the specific amplifier. The WiiM Amp uses Stereo PCM for TV sound. | If I want to listen to film soundtracks through my TV, I check the connection and output format first. Around 31% of consumers are likely to make TV sound their main buying priority. |
| Existing speakers | Check whether your speakers are passive, then compare the specifications of your speakers and amplifier for the specific pair. | If I want to keep my passive speakers, their technical compatibility with the amplifier matters most to me. Around 25% of consumers are likely to share this priority. |
| Space and bass | Take the device’s dimensions into account. If you’re planning to add a subwoofer, check whether it’s active and compatible with the amplifier’s output. | If space is limited, I want to keep my setup tidy and add a subwoofer only if needed. Around 19% of consumers are likely to prioritise space and bass balance. |
| Music streaming | Check that the built-in streaming features support the services you use and the ways you want to control them. | If I mainly listen to soundtrack albums through music services, built-in streaming and a convenient way to control it matter to me. Around 13% of consumers are likely to have this as their main priority. |
| System components and support | Think about which components you already have and which you still need. If something goes wrong, remember that your statutory rights are against the seller, while a guarantee is an additional voluntary promise. | If I want to plan the whole system and know who to contact if something goes wrong, I check the components and support terms. Around 12% of consumers are likely to share this priority. |
Having the right HDMI connection doesn’t guarantee that your TV will output a signal the amplifier supports. WiiM specifies Stereo PCM for the WiiM Amp. According to WiiM, the WiiM Amp Pro also supports Dolby Digital, but not DTS or Dolby Atmos.
Before buying, check that the audio format supported by the specific amplifier model matches your TV settings.
According to WiiM, the subwoofer outputs on the WiiM Amp and Amp Pro are designed for active subwoofers. A passive subwoofer needs an additional amplifier.
Check what type of subwoofer you have and the output specifications of the amplifier you choose.
A passive subwoofer may need an additional amplifier.
The Denon DRA-900H is a two-channel receiver. Its two subwoofer outputs don’t make it a system with dedicated centre and surround channels.
First decide whether you want to listen in stereo through two speakers or use a genuine multichannel speaker system.
Dedicated centre and surround channels require a different equipment and speaker setup.
The features listed relate to the specific product ranges and models mentioned. They don’t indicate whether a particular device is available.
Compact streaming amplifiers for passive speakers, with TV audio via HDMI ARC.
The MODEL M1 combines stereo amplification with HEOS streaming, HDMI eARC and a subwoofer output.
The DRA-900H is a two-channel network receiver with HDMI features and a range of input options.
The C 3030 is an integrated stereo amplifier with HDMI eARC, Bluetooth, phono and optical inputs.
First, check that the HDMI cable is plugged into the TV port marked ARC or eARC, that the external audio system is selected and that the output format is compatible with the amplifier. WiiM specifies Stereo PCM for the Amp. Cambridge Audio also notes that its Evo models may produce no sound if the TV is set to surround output instead of two-channel PCM. The setting you need depends on your specific TV and amplifier.
Not to the documented subwoofer output on the WiiM Amp or Amp Pro: WiiM specifies an active subwoofer, while a passive subwoofer needs an additional amplifier. Check the connection details separately for any other model.
No. A two-channel amplifier can be suitable for stereo through two speakers, but it doesn’t provide the connections and processing needed for dedicated centre and surround speakers.
If a product is faulty, your statutory consumer rights are against the seller. A guarantee is an additional voluntary promise and is subject to its own terms. The Verbraucherzentrale says the first options for putting things right are repair or replacement.
Electrical appliances covered by the relevant EU harmonisation legislation must carry the CE marking to be placed on the market in Germany. The Bundesnetzagentur describes it as part of the applicable conformity requirements. It is a manufacturer’s declaration, not an independent quality mark. Check the details for the specific appliance and version being offered.