Listeners with existing passive speakers
If you want to keep using your speakers, choose an amplifier with compatible connections and a suitable supported load.
Choose a stereo amplifier with speaker outputs and a supported impedance that match your existing speakers. Then decide between the connections offered by a traditional integrated amplifier and the built-in streaming of a streaming amplifier. In an open-plan living space, speaker and listening-position placement matter too: room-correction features can help, but they’re no substitute for positioning your speakers properly.
If you want to keep using your speakers, choose an amplifier with compatible connections and a suitable supported load.
In an open-plan room, speaker placement, listening position and reflections all affect the sound. A room-correction feature, if available, can help with speaker placement.
The right amplifier depends on whether you mainly listen to music through supported streaming services or from a properly connected turntable.
A good choice if: you use passive speakers and sources such as a CD player or turntable that can connect directly. Yamaha Germany lists optical and coaxial inputs for the A-S501; Denon Germany lists Bluetooth and MM phono for the PMA-600NE.
Bear in mind: if the model doesn’t have built-in network features, you’ll need a suitable player to access streaming services.
A good choice if: you mainly listen to folk through supported streaming services and want to use passive speakers without a separate network player. WiiM lists network playback and RoomFit for the Amp Pro.
Bear in mind: features vary by model. According to WiiM, the Amp supports AirPlay 2, while the Amp Pro and Amp Ultra do not. To connect a turntable without its own phono preamp to the Amp Pro, you’ll need an external preamp.
Choose according to your main priority and check the connections and requirements for the specific model you’re considering.
| Buying priority | What to check before buying | Who is this important to? |
|---|---|---|
| Finding the right amplifier for your speakers | Check whether your speakers are active or passive, their rated impedance and the manufacturer’s guidance against the amplifier’s connection and load specifications. | If I want to keep my passive speakers, I first need to make sure their load and connections are compatible with the amplifier. Around 36% of consumers put speaker compatibility first. |
| Listening position in an open-plan living space | Check whether you can place and angle the speakers as symmetrically as possible. If the specific model has room-correction features, consider these as an additional aid. | In an open-plan living space, I want balanced stereo imaging at my listening position, rather than relying on room correction alone. Around 29% of consumers say room and listening position are their top priority. |
| Connecting your music sources | Match the outputs on the sources you actually use to the amplifier’s inputs. If your phono signal isn’t amplified, make sure you have a suitable phono preamp. | If I listen to folk on a turntable, CD player, TV or over a network, I want to find the right signal path for my main source. Around 21% of consumers put source connections first. |
| Controlling playback easily | Check that your preferred streaming service is supported and, if needed, that AirPlay 2 is available on the exact model you’re considering. | For everyday listening, I want to use my preferred service or connection without needing an unsuitable extra device. Around 14% of consumers prioritise easy playback. |
A power rating at 4 Ω isn’t directly comparable with an RMS figure at 8 Ω.
Only compare figures measured at the same impedance and under the same conditions. First, check that your speakers are compatible with the specific amplifier.
Your listening position, speaker placement and reflective surfaces can all affect stereo imaging. Genelec notes that similar reflections on both sides are important for stereo imaging; room correction won’t solve every room problem.
Factor speaker placement into your plans, and treat room correction as an additional option.
WiiM lists AirPlay 2 for the Amp, but not for the Amp Pro or Amp Ultra.
Check the full model name against the connection you want to use.
An unamplified phono signal needs a suitable phono preamp before it can be connected to a standard line input. WiiM explicitly states that this is required for the WiiM Amp and Amp Pro.
Check whether your turntable has a built-in preamp or your amplifier has a suitable phono input.
Traditional stereo integrated amplifiers for separately connected sources. Yamaha Germany lists optical and coaxial inputs for the A-S501.
The PMA-600NE combines traditional connections with Bluetooth and MM phono, as listed on the Denon Germany product page.
Compact streaming amplifiers for passive speakers. WiiM lists network playback and RoomFit for the Amp Pro.
According to Marantz Germany, the MODEL M1 is a compact streaming amplifier with HEOS and HDMI eARC for music and, if needed, TV sound.
There’s no one-size-fits-all wattage requirement for a particular genre. First, check the load your speakers present, and only compare power ratings measured at the same impedance and under the same conditions. For example, Yamaha Germany gives the A-S501 an RMS rating of 85 W per channel into 8 Ω across 20 Hz–20 kHz; a separately stated maximum power output into 4 Ω is based on different test conditions.
Angle both speakers towards your listening position as evenly as possible, and try to keep their distances from nearby surfaces similar. Genelec’s guidance on monitor placement explains how reflections and symmetry can affect the sound; specific studio recommendations aren’t universal measurements for every living room.
It depends on the turntable and amplifier. WiiM explains that, for the Amp and Amp Pro, a turntable with a built-in phono preamp can connect to the line input. If the turntable has an unamplified phono output, you’ll need an external phono preamp.
For a standard online purchase by a consumer, you generally have a 14-day right to cancel, starting from the day you receive the goods; exceptions may apply in certain cases. The Verbraucherzentrale explains this time limit in an article published in August 2026. Your statutory rights if goods are faulty are claims against the seller and are not the same as a voluntary guarantee.
No. According to the European Union’s guidance, CE marking is required only for products covered by harmonised EU rules that explicitly require it. By applying the mark, the manufacturer declares that the product complies with those rules; it isn’t an independent official approval of the individual device.