Who listens while working from home?

Owners of passive speakers

You want to use your existing pair of speakers at your desk and start by checking that the amplifier and connections are a good match. Yamaha’s FAQ and the WiiM Help Center also cover speaker connections and compatible combinations.

Streamers short on space

You mainly listen to folk through music services and would like to fit the amplifier and network player into a single device, if possible. The WiiM Help Center explains how streaming amplifiers work with passive speakers.

Listeners with several sources

You might want to connect a computer, CD player or turntable, so you compare the inputs on the specific models you’re considering.

What to consider before buying

First, check whether your speakers are passive or active. Then make sure the outputs on your sources, the space available at your desk and the connections you actually need are all compatible with the model you’re considering.

What matters to you What to check before buying Who should pay particular attention
Speaker compatibility Check whether your speakers are active or passive. For passive speakers, compare the impedance rating and connections with the amplifier’s manual. If you want to keep using your existing passive speakers, the combination must match their specifications. Around 36% of consumers put speaker compatibility first.
Sources and streaming Match the outputs on your source devices to the amplifier’s inputs and check which streaming methods it supports. If you want to connect a computer, CD player or music service without needing extra devices you hadn’t planned for, the right connection method matters. Around 29% of consumers prioritise connections for their music sources.
Space and controls Check the dimensions of the casing and allow room for cables. Also make sure you can operate the amplifier without a smartphone, if needed, and consider where your speakers will go. If the amplifier is going on a small desk, its casing, cables and speaker placement all need to fit your workspace. Around 21% of consumers focus mainly on space and ease of use.
Headphones and turntables Check for a headphone socket and the right plug type. For a turntable, make sure the cartridge and any built-in phono stage are compatible with the amplifier input. If you sometimes listen through headphones or want to connect a record player, these specific connections are important. Around 14% of consumers prioritise headphone or vinyl connections.

Common selection mistakes

  • Comparing wattage without checking the test conditions

    Power ratings can be based on different impedance levels and test conditions. So a single wattage figure doesn’t tell you whether an amplifier is right for your speakers.

    Only compare power ratings on the same basis, and check your speakers’ specifications against the manual for the specific amplifier.

  • Confusing Bluetooth with network streaming or AirPlay 2

    Bluetooth and network services use different connection methods. WiiM also lists model-specific differences for AirPlay 2: the Amp supports it, while the Amp Pro does not.

    Decide which connection method you need and check that it’s supported by the full model name before making your choice.

  • Only allowing space for the amplifier on your desk

    Cables and speakers need space too. Genelec points out that speaker placement and room acoustics both affect the sound you hear at your listening position.

    Measure the space available and the cable runs, and plan where your speakers will go. Don’t judge the sound from an amplifier specification alone.

Brands worth considering

Yamaha

The A-S301 is a traditional integrated amplifier for separate analogue sources and compatible digital sources.

  • Yamaha Germany lists optical and coaxial digital inputs, as well as 60 W per channel into 8 Ohms across 20 Hz to 20 kHz.
  • At 435 × 151 × 387 mm, the A-S301 needs space in your workspace. The listed connections alone don’t confirm that it has a built-in network player.

Denon

The PMA-600NE combines traditional amplifier connections with Bluetooth and an MM phono input.

  • Denon Germany lists digital inputs, Bluetooth and an MM phono input; the manufacturer specifies 45 W per channel into 8 Ohms.
  • Bluetooth isn’t the same as built-in network streaming. Check that the connections and playback methods suit your devices.

WiiM

The Amp and Amp Pro are streaming amplifiers for passive speakers. The playback method you need is an important factor when choosing between them.

  • WiiM’s documentation covers streaming, inputs and room correction for both models. AirPlay 2 is listed for the Amp, but not the Amp Pro. STEREO rated the Amp’s app and features positively.
  • STEREO’s review of the original Amp criticised how little could be controlled directly on the device. This finding applies to the Amp and shouldn’t automatically be taken to apply to the Amp Pro.

Cambridge Audio

The AXA35 is worth considering for analogue sources, a turntable and wired headphones.

  • The manual specifies a phono stage, a front-mounted AUX input and a headphone socket. It also states that plugging in headphones mutes the speaker outputs.
  • According to the manual, whether a suitable EU mains connection is included depends on the country of purchase. Check what’s included with the specific offer.

Rotel

The A8 is an alternative designed for analogue sources.

  • Likehifi describes the A8 as having a headphone socket and controls for balance, bass and treble.
  • The review doesn’t mention modern digital inputs. Its analogue connections will therefore only suit you if your sources are compatible.

Joybuy product options

This product option is designed for a compact stereo set-up with a compatible pair of speakers and Bluetooth or wired playback.

Nobsound 200 W Mini Bluetooth Digital Amplifier

Nobsound 200 W Mini Bluetooth Digital Amplifier

For a compatible pair of speakers on your desk, if you want to use Bluetooth or a stereo RCA input.

2.0 channels; stated speaker range: 4–8 Ω.

Bluetooth 5.0 and stereo RCA inputs are listed.

Dimensions: 92 × 108 × 30 mm.

Only use it with a compatible power supply: according to the product description, an incompatible adapter could cause overheating and fire.

View at Joybuy

Frequently asked questions

Do I need a stereo amplifier for active speakers?

Not for amplification alone. First check the inputs and built-in amplification of your specific active speakers. The speaker outputs on the integrated amplifiers covered here are intended for compatible passive speakers.

What’s the best way to connect a hi-fi system at my desk?

Match the outputs on your music source to the amplifier’s inputs. If you have passive speakers, check their specifications against the relevant manual too. Make room for your speakers as well, since their positioning and the room affect the sound you hear at your listening position.

Can I connect a turntable directly?

Only if the cartridge, any built-in phono stage and the amplifier input are compatible. The Denon PMA-600NE has an MM phono input; the WiiM Amp tested by STEREO doesn’t have a phono input.

What rules apply to online purchases and disposal in Germany?

For consumer distance contracts, § 312g BGB generally provides a right of withdrawal; § 355 BGB specifies a period of 14 days. Exceptions and the exact start of the period should be checked on a case-by-case basis. According to the German Environment Agency, old electrical appliances must not be put in household waste and should instead be collected separately.

What safety information should I check in a product listing?

Check the specific listing for information about CE marking, the manufacturer, instructions and warnings in German, and the declaration of conformity. The German Federal Network Agency includes these points in its market surveillance requirements; this doesn’t confirm that any individual listing is compliant.