If you have passive speakers and want to start playlists without a separate network player, a streaming amplifier could be a good choice. If you already have source devices, a traditional integrated amplifier with the right inputs may be all you need. First check speaker compatibility and connections, then consider placement and volume control. Wattage figures alone don’t show whether sound will be evenly distributed across an open-plan space or whether the volume will be considerate to your neighbours.
Who needs to consider their choice
Playlist listeners with passive speakers
If you want to start festive playlists without a separate network player, check which music services and playback methods the amplifier supports. WiiM describes its streaming amplifiers as playing music through network services, but the available protocols vary by model.
People living in open-plan spaces
In a combined living and dining area, speaker placement, listening position and consideration for your neighbours all matter. The German Environment Agency notes that rules on noise from neighbours can be set out in state law, local regulations and building rules.
People using several music sources
If you switch between a TV, turntable and digital source devices, check that the amplifier’s inputs match the outputs on your equipment. Yamaha Deutschland, Denon Deutschland, Marantz Deutschland and Cambridge Audio list different inputs and features for the models covered here.
What to look for when buying
First, decide how you’ll play your music and which speakers you want to connect. Then check whether you need extra inputs for a TV or turntable, and whether easy-to-reach volume controls would be useful in your living space.
| Buying consideration |
What to check |
Who should pay particular attention? |
| Streaming playlists |
Check that the specific model supports your music service and the streaming protocol you need. |
If I want to play festive playlists directly over my network, support for my preferred playback method is essential. Around 36 % of consumers put streaming first. |
| Speakers and room |
Check whether your speakers are passive or active, their impedance rating and where they’ll go in your open-plan space. |
If I want to use passive speakers in an open-plan living and dining area, the amplifier must be compatible with them, and I need to consider the listening position when setting them up. Around 29 % of consumers prioritise matching speakers to their room. |
| Source connections |
Match the outputs on your TV or turntable to the appropriate HDMI ARC, optical, coaxial, line or phono inputs. |
If I want to connect my existing music and TV equipment without choosing an incompatible signal path, I compare their outputs with the amplifier’s inputs. Around 21 % of consumers put source connections first. |
| Volume in your home |
Check how easy the volume controls are to use and whether the model has a volume limit function; follow your building rules and local regulations. |
If I’m playing music at a party, I want to be able to control the volume easily and be considerate to my neighbours. Around 14 % of consumers prioritise volume control. |
Common selection mistakes
-
Using wattage figures to rank amplifiers for open-plan spaces
Power ratings only make sense when considered alongside their respective impedance and measurement conditions. On their own, they don’t tell you how evenly sound will fill an open-plan living space.
First check speaker compatibility and connections. Only compare power ratings when the impedance and measurement conditions match.
-
Assuming every model from a brand has the same streaming features
WiiM’s technical overview lists AirPlay 2 for the Amp, but not for the Amp Pro. So you can’t assume that every model variant supports your preferred playback method.
Check the music service and streaming protocol against the full model name. If your preferred method isn’t supported, you may need an additional source device.
-
Using any analogue input for a turntable
A line input isn’t automatically a phono input. According to the manufacturer, the Cambridge Audio AXA35 has a built-in MM phono stage; you shouldn’t assume other amplifiers have the same feature.
Check that the phono input is compatible with your turntable and any preamp you may have. If there’s no suitable preamp, you may need a separate phono stage.
Key brands at a glance
WiiM
Streaming amplifiers for passive speakers; according to the manufacturer, the Amp Pro also includes HDMI ARC.
- WiiM lists room correction and 60 W per channel into 8 Ohm for the Amp Pro.
- According to WiiM Help Center, AirPlay 2 is listed for the Amp, but not the Amp Pro, in the model table. Check features for your specific model.
Yamaha
The A-S501 is a traditional integrated amplifier for connecting separate analogue and digital sources.
- Yamaha Deutschland lists optical and coaxial inputs, along with a minimum RMS output of 85 W + 85 W into 8 Ohm at 20 Hz–20 kHz and 0.019 % THD.
- You may need a separate source device to play network playlists.
Denon
According to Denon, the PMA-900HNE combines HEOS streaming with phono and digital inputs.
- This combination could suit you if you want to connect analogue or digital sources as well as play network playlists.
- Whether a particular streaming service and your speakers are compatible depends on the specific device and set-up.
Marantz
The STEREO 70s is designed for stereo listeners who want to connect a TV and several HDMI devices.
- Marantz lists six HDMI inputs, ARC and HEOS for this model.
- If you only have one music source, extra TV connections may not be useful for your needs. They don’t guarantee better sound in every room.
Cambridge Audio
The AXA35 is an analogue option with a built-in MM phono stage.
- Cambridge Audio lists 35 W per channel and an integrated MM phono stage.
- According to the manufacturer’s manual, the AXA35 is designed exclusively for 8-Ohm speakers. You may need a separate source device for network playlists.
Joybuy products
Products to suit you coming soon.
Frequently asked questions
Can I connect both active and passive speakers to speaker outputs?
The amplifier outputs covered here are intended for compatible passive speakers. Before connecting anything, check the speaker type and ratings for both devices. The manufacturer recommends using only 8-Ohm speakers with the Cambridge Audio AXA35.
How do I connect a TV to my music system?
Choose a signal path that matches the connections on both devices: the WiiM Amp Pro and Marantz STEREO 70s offer HDMI ARC, while Yamaha lists an optical digital input for the A-S501. For HDMI ARC, WiiM recommends stereo PCM or Dolby Digital audio formats with the Amp Pro; DTS and Dolby Atmos aren’t supported.
What should I know about a faulty product and disposing of an old device?
In Germany, statutory consumer rights against the seller are distinct from a voluntary guarantee. Waste electrical equipment must be collected separately; according to the German Environment Agency, local collection points generally accept it free of charge.
Is there a single nationwide cut-off time for playing loud music at a party at home?
There isn’t a single nationwide cut-off time that applies to every party at home. For noise from neighbours, the German Environment Agency points to state law, local rules and building regulations. Check the requirements that apply where you live.