Which amplifier is right for you?

Listeners with existing passive speakers

If you want to keep using your speakers, their impedance and connections must be compatible with the specific amplifier.

Electronic music fans who care about bass

If you might add an active subwoofer later, check that the amplifier has a suitable connection and find out what settings are available to integrate it with your main speakers.

Streamers with limited space

A compact amplifier with built-in network playback could be a good option if you want to stream without having to make space for a separate network music player.

What should you look for when buying?

First, check your speakers’ impedance and the connections you need. Then decide whether streaming or the option to add more bass later matters to you. Finally, measure the available space, including room for cables.

Priority What to check before buying Who is it important to?
Speaker compatibility Check the impedance of your passive speakers against the manual for the specific amplifier. If I want to keep using my existing passive speakers, their impedance must be compatible with the amplifier. This is a key priority for around 31% of consumers.
Controlled deep bass Check whether there’s a suitable output for an active subwoofer and what settings are available. If you want to add an active subwoofer later, you’ll need a suitable connection and should check the available settings. Around 31% of consumers prioritise adding more bass.
Music sources and controls Check that the outputs on your existing sources match the inputs and streaming features on the specific model. If I want to listen to music from my existing devices, their connections must be compatible with the amplifier. Around 23% of consumers prioritise connecting their music sources.
Space and room to expand Consider the amplifier’s dimensions, space for cables and room for any additions you might make later. In a small living room, I want to find a suitable place for the amplifier and any music players I need. Around 15% of consumers say available space is their main buying priority.

Common buying misconceptions

  • Comparing wattage without checking the test conditions

    Yamaha rates the A-S301 at 2 × 60 W into 8 Ω at 20 Hz–20 kHz and 0.019% THD. Denon specifies a supported speaker impedance of 4–16 Ω for the PMA-600NE. These figures describe different features and don’t replace checking compatibility with your own speakers.

    Yamaha Germany and Denon publish the specifications for their respective models. Check the supported speaker load in the manual, and only compare power ratings when the test conditions are similar.

  • Assuming a recording output is a volume-controlled subwoofer output

    According to the manufacturer’s manual, the recording output on the Cambridge Audio AXA35 isn’t controlled by the main volume. This means it can’t be used as a standard volume-controlled subwoofer output.

    If you’re planning to use a subwoofer, check the connection options in the manual for the specific amplifier.

    You may need a different connection method or another amplifier.

  • Assuming Bluetooth, network streaming and HDMI ARC are the same thing

    The Denon PMA-600NE has Bluetooth and digital inputs. The manufacturer also lists network streaming and HDMI ARC for the WiiM Amp Pro; these are different ways to connect and play audio.

    Check that the outputs on your music sources are compatible with the features of the exact amplifier model.

    If it doesn’t support a connection you need, you may have to buy an additional device.

Key brands to consider

WiiM

The WiiM Amp Pro is a compact streaming amplifier for passive speakers, with the option to connect an active subwoofer.

  • WiiM lists streaming, HDMI ARC and an adjustable subwoofer output.
  • Before buying, check that it supports the services and sources you want to use, and that the setup suits your needs.

Yamaha

The A-S301 and A-S701 are traditional integrated amplifiers with optical and coaxial digital inputs, as well as a subwoofer output.

  • Yamaha Germany rates the A-S301 at 2 × 60 W and the A-S701 at 2 × 100 W into 8 Ω, both at 20 Hz–20 kHz and 0.019% THD.
  • The A-S701’s higher rated power alone isn’t enough to make it the right choice for everyone; your speakers and listening environment also matter.

Denon

The PMA-600NE combines traditional stereo connections with Bluetooth, digital inputs and an MM phono input.

  • Denon specifies a supported speaker impedance of 4–16 Ω for this model.
  • Bluetooth doesn’t automatically mean that the amplifier has built-in Wi-Fi streaming.

Marantz

The PM6007 is a wired integrated stereo amplifier with analogue and digital inputs, plus an MM phono input.

  • Marantz lists a subwoofer connection.
  • According to the manual, the subwoofer connection only outputs a signal when playback is through SPEAKERS A. Marantz says the model has neither HDMI nor HEOS.

Cambridge Audio

The AXA35 is an analogue alternative if you already have a compatible source.

  • The manufacturer’s manual lists a front-mounted AUX input.
  • According to the manual, the recording output can’t be used as a volume-controlled preamp or subwoofer output.

Joybuy picks for compact stereo setups

This selection is aimed at space-saving stereo setups with passive speakers and Bluetooth or RCA sources.

Nobsound 200 W Mini Bluetooth digital amplifier

Nobsound 200 W Mini Bluetooth digital amplifier

Could suit a compact stereo setup with passive speakers and Bluetooth or RCA sources, provided the speakers are within the specified impedance range.

Bluetooth and stereo RCA inputs; speaker outputs for 4–8 Ω.

Bass and treble controls with ±10 dB adjustment, plus Tone Bypass.

Dimensions: 92 × 108 × 30 mm.

Use only the supplied compatible 19-V power adapter. According to the product information, an incompatible adapter may cause overheating or fire.

View at Joybuy

Frequently asked questions

Do I need a subwoofer for electronic music?

No, a subwoofer isn’t essential if you’re happy with your existing speakers. If you’d like to connect an active subwoofer later, check whether the amplifier has a suitable output. The manufacturer also lists adjustable subwoofer features for the WiiM Amp Pro.

Can I connect any passive speakers?

No, the speaker impedance must be compatible with the supported load of the specific amplifier. Denon specifies 4–16 Ω for the PMA-600NE. Before connecting the speakers, unplug the amplifier from the mains as instructed in the Denon manual.

What should I know about CE marking and disposal?

Electrical products covered by relevant harmonised EU legislation must carry the CE marking required by that legislation. Your Europe points out that the CE mark isn’t an independent quality certification, so check the information provided with the specific product. In Germany, old electrical equipment must be disposed of separately from household waste, as explained by the Federal Environment Agency.

Who is responsible if something goes wrong after purchase?

For consumer purchases in the EU, the seller is responsible for the statutory two-year legal guarantee. Your Europe makes clear that an additional manufacturer’s guarantee doesn’t replace this statutory protection.