Which approach is right for you?

Vinyl listeners with a turntable without a built-in phono stage

If your turntable outputs an unamplified MM signal and you use passive speakers, check whether the amplifier has a compatible phono stage. Cambridge Audio and Denon list an MM phono input on the models in question.

Listeners with an existing stereo system

If you’re keeping your speakers and turntable, check their connections and specifications against the amplifier. Yamaha and Sony also publish the dimensions of their units, so you can compare them with the space you have available before buying.

Vinyl and digital listeners

If you regularly use other sources as well as records, check the connections on the specific model: Denon lists Bluetooth and digital inputs for the PMA-600NE, while Yamaha lists optical and coaxial digital inputs for the A-S301.

What should you look for when buying?

Start by checking the phono signal path and matching the amplifier to your speakers. Then measure the space available and only choose extra connections if your other devices need them.

Buying priority What to check Who it matters most to
Phono signal path Check the cartridge type and whether you already have a phono stage. For a compatible, unamplified MM signal, use the phono input; for an amplified signal, use a suitable line input. If my turntable outputs an unamplified MM signal, I want to connect it properly without a separate phono unit. Around 36% of consumers put the phono signal path first.
Passive speakers Compare the impedance ratings of your speakers and amplifier, as well as the conditions under which their power ratings were measured. If I’m keeping my passive speakers, I want to choose a compatible amplifier rather than relying on a single wattage figure. Around 29% of consumers prioritise matching their speakers and amplifier.
Space and controls Check the unit’s dimensions, allowing room for connections, and consider only the controls you need. If my living room has limited space, I want to know in advance whether the unit and cables will fit where I plan to put them. Around 21% of consumers put space and controls first.
Additional sources Check the outputs on your other devices against the inputs specifically listed for the amplifier. If I use digital or wireless sources as well as soul records, I want the connections I need to be built into the amplifier. Around 14% of consumers prioritise additional sources.

Common connection and selection mistakes

  • Connecting an amplified signal to a phono input again

    Cambridge Audio warns that connecting an already amplified turntable signal to the AXA35’s phono input may cause distortion.

    Check whether your turntable has a built-in phono stage or uses an external one. An already amplified signal should go to a suitable analogue input.

  • Comparing wattage without checking the measurement conditions

    Power ratings may be measured under different conditions. For example, Sony specifies 100 W + 100 W for the STR-DH190 at 8 Ohm, 1 kHz and 1% THD; Yamaha specifies 60 W + 60 W RMS for the A-S301 at 8 Ohm across 20 Hz to 20 kHz.

    Compare power alongside impedance, frequency range and distortion, and check what your speakers require.

  • Confusing a line input with a phono input

    WiiM says that the Amp and Amp Pro do not have a built-in phono input. So you can’t connect an unamplified turntable output directly as you would an amplified line-level signal without a suitable phono stage.

    Before choosing, check whether your turntable already has a phono stage or whether you want to add a separate option that’s compatible with your cartridge.

Notable brands to consider

Cambridge Audio

The AXA35 is an analogue-focused integrated amplifier with a built-in MM phono stage and tone controls.

  • Cambridge Audio lists 35 watts per channel for the AXA35, along with a phono stage and a headphone socket.
  • Cambridge Audio says an already amplified signal should go to a different analogue input. Low-output MC cartridges need an additional compatible solution.

Denon

According to Denon, the PMA-600NE combines MM phono with Bluetooth and digital inputs.

  • Denon specifies 45 watts per channel at 8 Ohm, and lists Bluetooth and digital inputs.
  • If you only use analogue sources, check whether you really need the extra features.

Yamaha

According to Yamaha, the A-S301 has MM phono as well as optical and coaxial digital inputs.

  • Yamaha Germany specifies 60 W + 60 W RMS at 8 Ohm across 20 Hz to 20 kHz.
  • Check the stated dimensions of 435 × 151 × 387 mm against the space available in your living room. The power rating is the manufacturer’s specification, not the result of a listening test.

Sony

According to Sony, the STR-DH190 stereo receiver combines a phono input with Bluetooth and radio reception.

  • Sony specifies a speaker impedance of 6–16 Ohm for this model.
  • Sony’s 100 W + 100 W power rating applies at 8 Ohm, 1 kHz and 1% THD. It therefore can’t be compared directly with full-range figures for other models without considering the measurement conditions.

WiiM

The Amp and Amp Pro are options for a line input when you already have a phono stage or plan to add one separately.

  • WiiM explains that a turntable with a built-in phono stage can be connected to the RCA input.
  • According to WiiM, the Amp and Amp Pro do not have a built-in phono input. An external phono stage is needed for an unamplified turntable signal.

Joybuy product selection

This Joybuy selection covers compact amplifiers for a line-level signal path with a phono stage already in place or planned separately. Before buying, check that the connections on the specific model are compatible with your turntable and passive speakers.

Nobsound mini digital amplifier with Bluetooth

Nobsound 200 W Mini Digital Amplifier with Bluetooth

For a turntable with an already amplified signal or a separate phono stage. Check first that the unit’s connections are compatible with your speakers.

The product description lists 200 W, Bluetooth, and bass and treble controls. Compare the power rating with its measurement conditions and your speakers’ requirements.

Joybuy

Frequently asked questions

Can I connect a turntable directly to the phono input?

Only if the output signal and phono stage are compatible. Cambridge Audio specifies that the AXA35’s phono input is suitable for an unamplified MM cartridge; if your turntable has a built-in phono stage or uses an external one, the signal should go to a different analogue input. Low-output MC cartridges need additional compatible amplification with the AXA35.

What should I check before positioning and connecting the amplifier?

Measure the space available, including room for the connections, and check your speakers’ specifications against the amplifier’s manual. For the AXA35, Cambridge Audio recommends connecting the earth terminals on your turntable and amplifier if available, and keeping the turntable away from sources of magnetic interference.

Is a manufacturer’s warranty the same as your statutory rights?

No. According to consumer information from the European Union, consumer purchases are generally covered by a minimum two-year legal guarantee from the date the goods are received. An additional voluntary guarantee does not replace this; check its specific terms separately.

Which compliance details are important for an electrical appliance?

The German Federal Network Agency lists a correct CE mark, an identifiable product with manufacturer details, and German instructions with the required warnings among the points it checks during market surveillance. This does not mean that a specific model or listing has been individually checked.