Who should consider these options?

Owners of passive speakers

If you want to keep using your existing passive speakers, check that their connections and requirements match the specific amplifier model. Power ratings from different manufacturers are only comparable under the same conditions; Yamaha Deutschland, for example, specifies impedance and measurement conditions.

Listeners with a regular listening spot

If you usually listen to sonatas from the same seat, you can plan your speaker positions and listening spot together. KEF recommends considering the physical set-up and listening position first, before assessing any room feature.

Listeners with a preferred music service

If you play recordings through a particular service or connection method, check that the exact model supports it. WiiM and Eversolo note that support for AirPlay 2 and built-in music services varies by model.

What should you look for when buying?

Start by matching the amplifier to your speakers, then plan your set-up around your listening spot and check how you’ll access your music, along with any potential extra costs.

Buying criterion What to check Who should pay particular attention?
Speakers and power Compare connections, nominal impedance and power ratings using the same load and measurement conditions. If I want to keep using my existing passive speakers, matching the amplifier to that specific pair matters more than a single wattage figure. Around 36% of consumers are likely to make this their top priority.
Listening position and set-up Plan the position of both speakers in relation to your seat; only then consider a room feature as an additional option. If you usually listen from the same spot in a large living room, you’ll want to be able to adjust the speakers and seating position together. Around 29% of consumers are likely to focus first on their listening position and set-up.
Access to recordings Check that your preferred music service and the connection method you actually use are supported, using the full model name. If I want to play piano sonatas through a particular app or via AirPlay 2, the specific amplifier must support that connection method. Around 21% of consumers are likely to make access to music their first consideration.
Additional features and ongoing costs For any features you want, check what’s included, what accessories are needed and whether you’ll need to make any extra purchases. If you plan to use optional room calibration, check whether you’ll need to buy anything else. Around 14% of consumers are likely to see potential additional costs as their main buying priority.

Common selection mistakes

  • Comparing wattage figures measured under different conditions

    Without details of impedance and measurement conditions, a power rating can only tell you so much. On its own, it doesn’t show whether an amplifier is a good match for your speakers.

    Start by checking your speaker specifications and only compare power ratings where the load and measurement conditions match.

  • Prioritising room correction over speaker placement

    Speaker positioning in relation to your listening spot affects the sound before any electronic adjustment. KEF recommends considering the physical set-up and listening position first.

    Try different speaker positions from your usual listening spot first, then assess any available room feature as an extra.

  • Assuming “Dirac Live Ready” means calibration is included

    For Dirac Live, NAD states that the NAD C 700 V2 requires a separately purchased licence and calibration microphone.

    Before buying, decide whether you want to use Dirac Live, then check what’s included with the specific offer.

    Using the feature may require you to buy a licence and calibration microphone separately.

  • Assuming streaming features are the same across an entire brand

    WiiM’s model list shows that AirPlay 2 support varies across its Amp models. Eversolo notes that built-in music services depend on the certification status of each model.

    Check that the specific model, using its full name, supports your preferred service and connection method.

Key brands at a glance

Yamaha

The R-N800A is a network stereo receiver for passive speakers and other audio sources. The German specification sheet lists YPAO, along with a phono input and headphone output.

  • Yamaha Deutschland specifies 100 W per channel into 8 Ω at 20 Hz–20 kHz and 0.07% THD for the R-N800A.
  • The specification sheet does not list HDMI ARC for this model. Its power rating alone does not show whether it is suitable for a particular pair of speakers.

WiiM

According to WiiM, the Amp Ultra is a compact streaming amplifier for passive speakers, with RoomFit and HDMI ARC.

  • WiiM specifies 100 W per channel into 8 Ω and lists RoomFit as a built-in feature.
  • According to WiiM’s model list, the Amp Ultra does not support AirPlay 2, so check that the exact model supports the connection method you need.

NAD

The C 700 V2 combines BluOS with a range of connections, including phono and HDMI eARC.

  • NAD specifies 80 W per channel for the C 700 V2.
  • According to NAD, Dirac Live requires a separately purchased licence and calibration microphone.

Nubert

The nuConnect ampXL is an alternative to consider for passive speakers and a range of connection methods, including AirPlay 2 and Chromecast.

  • Nubert lists X-Room Calibration as a feature of this model.
  • The advertised rating of up to 340 watts per channel cannot be directly compared with other models without matching measurement conditions.

Eversolo

According to the manufacturer, the Play has a display and built-in music services, including IDAGIO and Qobuz.

  • Direct control via the display is a listed feature of the device.
  • Eversolo notes that the built-in services available depend on certification status. Check that the specific model supports the service you want.

Joybuy products

Related products coming soon.

Frequently asked questions

Is wattage enough to choose an amplifier for my large living room?

No. First, consider the requirements of your specific speakers and your listening distance. Compare wattage figures alongside impedance and measurement conditions. For example, Yamaha Deutschland specifies 100 W per channel into 8 Ω at 20 Hz–20 kHz and 0.07% THD for the R-N800A. This rating does not guarantee that it will suit every speaker and room combination.

What should I position before calibrating the room?

First, decide where to place both speakers and where you usually sit. KEF recommends starting with the physical set-up and trying different distances; you can then assess any available room feature.

Can every WiiM Amp receive music via AirPlay 2?

No. According to WiiM’s model list, the WiiM Amp supports AirPlay 2, but the Amp Pro and Amp Ultra do not. So check the full model name and make sure it supports your preferred connection method.

Are a licence and calibration microphone for Dirac Live included with the NAD C 700 V2?

No. According to NAD, you need to buy the licence and calibration microphone separately if you want to use Dirac Live. Check what’s included with the specific offer if you plan to use this feature.

Can I assume my music service is built into the Eversolo Play?

Not without checking the specific service. Eversolo lists services including IDAGIO and Qobuz, but notes that the number of built-in services depends on the certification status of each platform. Before buying, check that your preferred service is supported.