Choose open-back studio headphones if you listen critically in a quiet space, and a closed-back model if you need more isolation while recording or in a noisy environment. Match the levels of your reference and recording in your audio software. For numerical loudness and True Peak readings, you’ll need a metering function, not a particular pair of headphones. Also check the fit, audio output and cable routing at your workstation.
Who listens and compares?
A/B comparison listeners
If you’re comparing several recordings or a mix with a reference, you’ll need a fair listening level and a separate metering function for numerical loudness readings. iZotope explains how to match the levels of reference tracks, while the International Telecommunication Union describes algorithms for measuring programme loudness and True Peak.
Recording in a shared space
If you monitor while recording or there’s background noise at your workstation, the headphone design and fit are important factors to consider. beyerdynamic and Sennheiser specify closed-back models for recording and monitoring.
Long listening sessions at a desk
If you have long sessions or switch between audio outputs, check the plug, cable routing, fit and availability of replacement ear pads. beyerdynamic and Sennheiser list detachable cables or replaceable ear pads for certain models.
What matters when buying?
Two screens can display a recording and a meter side by side, but you’ll still need audio software for fair listening comparisons and numerical measurements.
| Buying priority |
What to check before buying |
Who is it important to? |
| Fair level comparison |
Check whether your workflow lets you compare the reference and recording through the same listening setup, and match their levels in your software. You’ll need a metering function for loudness and True Peak readings; the International Telecommunication Union describes the relevant measurement algorithms. |
If I want to compare a mix and reference fairly, I first need to match their listening levels. Around 36% of consumers put fair level comparison first. |
| Assessing tonal balance |
Compare your own level-matched recordings on the specific model. HIFI.DE describes the DT 900 PRO X as having a comparatively neutral sound, while the DT 700 PRO X and ATH-M50x have a bass emphasis. |
If I want to assess differences in tonal balance and detail between recordings, the tuning of the specific headphones matters to me. Around 29% of consumers prioritise assessing sound quality. |
| Isolation while recording |
Check how the ear pads fit and whether your recording microphone picks up sound from the headphones. Closed-back models are available from brands including beyerdynamic and Sennheiser for recording and monitoring. |
If I’m recording in the same space or can hear background noise, I need a design that suits my situation. Around 21% of consumers prioritise isolation. |
| Fit, cables and connections |
Check that your devices’ sockets are compatible with the headphone plug and adapter, and check the cable routing and fit. Replaceable ear pads may be useful for longer listening sessions; make sure you check the exact model version. |
If I listen at my desk for long periods or switch between devices, the fit and connection need to suit my workstation. Around 14% of consumers put comfort and connectivity first. |
Buying and usage pitfalls
-
Using headphones as a level meter
Listening alone won’t give you numerical LUFS or True Peak readings. A louder reference can also make an A/B comparison unfair, as iZotope explains when working with reference tracks.
First match the levels of the reference and recording for your listening comparison, and only apply target values to the output medium they’re intended for.
Set aside time for A/B level matching and, if needed, set up a suitable metering function in your audio software.
-
Assuming “studio” means a neutral sound
Tuning varies from model to model. HIFI.DE criticises the bass emphasis of the DT 700 PRO X and ATH-M50x, so you can’t judge a model by its product category alone.
Compare familiar recordings at a similar listening level on the specific model, rather than choosing based only on the “studio” label.
-
Choosing open- or closed-back headphones without considering your workspace
Open-back models aren’t the obvious choice if you need isolation while recording or if sound leakage could disturb others. Closed-back models are available from brands including beyerdynamic and Sennheiser for recording and monitoring.
Before choosing a model, consider whether you’ll be recording at your workstation, whether there’s distracting background noise and whether other people might hear your audio.
Key brands at a glance
beyerdynamic
The manufacturer positions the open-back DT 900 PRO X for listening and mixing, and the closed-back DT 700 PRO X for recording and monitoring.
- The manufacturer specifies 48 Ohm for both models, along with detachable cables with a 3.5-mm plug and 6.35-mm adapter.
- HIFI.DE notes the bass emphasis of the DT 700 PRO X. This assessment applies to that specific model.
Austrian Audio
Austrian Audio describes the open-back Hi-X65 as a model for mixing, mastering and critical listening.
- The manufacturer lists replaceable key components. HIFI.DE describes this model’s frequency response as balanced and highlights its detail.
- HIFI.DE points out that no hard case is included.
Audio-Technica
Audio-Technica positions the closed-back ATH-M50x as monitor headphones for studio and everyday use.
- The manufacturer specifies a detachable cable.
- HIFI.DE notes the bass emphasis and high clamping force of the ATH-M50x, as well as ear cups that may feel too small for some users.
Sennheiser
The closed-back HD 280 PRO is available for recording and monitoring; the product details listed apply to item 506845.
- The manufacturer’s website lists a foldable design, replaceable ear pads, a 3.5-mm plug with a 6.3-mm adapter and 64 Ohm.
- Check that the connection and model version match the details for your audio output and the specific product.
Sony
Sony lists the MDR-7506 for studio and broadcast environments.
- Sony specifies a 3-m cable and a plug adapter.
- The German technical specifications page lists 24 Ohm at 1 kHz. Don’t assume this value applies to another market version without checking.
Suitable products at Joybuy
Related products will be available soon.
Frequently asked questions
Can two screens or studio headphones replace a loudness meter?
No. Two screens can display a recording and a meter separately, but you’ll need a metering function for numerical programme loudness and True Peak readings. The International Telecommunication Union describes the relevant algorithms in BS.1770-5; iZotope recommends matching a louder reference to the mix level before A/B listening.
Should I choose open- or closed-back studio headphones for comparing recordings?
Open-back models are a better option if you’re listening critically in a quiet space and don’t need isolation. Closed-back models are more suitable if there’s background noise or you’re monitoring while recording. beyerdynamic and Austrian Audio list open-back models for mixing or critical listening; beyerdynamic and Sennheiser offer closed-back models for recording and monitoring. Also check how they fit your head.
How can I check whether studio headphones will work with my devices?
First, check that the socket on your audio output matches the plug and adapter supplied. beyerdynamic lists detachable cables for the DT 900 PRO X and DT 700 PRO X, while Sennheiser lists replaceable ear pads for the HD 280 PRO. Check the exact model version when buying cables and spare parts.
What are the rules in Germany on faults and cancellation rights when buying online?
For eligible consumer purchases from business sellers, the seller is legally responsible for faults for at least two years; an additional manufacturer’s guarantee doesn’t replace this. Online consumer contracts generally come with a 14-day right to cancel. Check any exceptions and the requirements for your specific contract separately. Verbraucherzentrale explains the right to cancel, while Your Europe describes the EU-wide minimum period for the legal guarantee.
Is it safe to listen at high volume for long periods?
No. The World Health Organization gives an average of 80 dB for up to 40 hours a week as an example of safe listening; at higher levels, the safe listening time drops considerably. This guidance relates to sound exposure and isn’t a LUFS target for an audio file.