Who’s listening, and where?

Detail-checking in quiet spaces

When comparing the original with the restored version in a quiet setting, you’ll want to assess any remaining clicks or hiss, as well as new processing artefacts. Beyerdynamic describes the DT 990 PRO as open-back headphones for critical listening and editing; iZotope lists clicks and background noise among the issues that audio restoration can address.

Checking archives in a shared office

If conversations or other workplace noise drown out quiet passages, closed-back headphones may be a suitable choice. The actual level of isolation also depends on the fit. The World Health Organization notes that volume, listening duration and repeated exposure to loud sounds all contribute to the risk of hearing damage.

Checking recordings during long desktop sessions

If you often switch between views on two screens, look for a comfortable fit, a connection that works with your playback device and a practical cable route. Switching between screens alone doesn’t tell you which audio output or connection you need.

What should you look for?

Open-back design

A good fit if: You’re in a quiet, undisturbed space and want to assess spatial changes and processing details. Beyerdynamic lists the DT 990 PRO as an example for critical listening and editing.

The trade-off: Open-back ear cups don’t fully block out surrounding noise, and sound can escape. Beyerdynamic also notes that the DT 990 PRO has emphasised treble.

Closed-back design

A good fit if: Conversations or other noise make it harder to assess quiet passages, or you want to minimise the sound others can hear in the workplace.

The trade-off: Isolation also depends on the fit. Manufacturers’ claims about attenuation or sound don’t prove that every restoration can be assessed reliably with these headphones.

Semi-open design

A good fit if: You’re considering a middle ground for a relatively quiet workspace and are happy with less isolation. AKG describes the K240 MKII as semi-open.

The trade-off: Don’t expect semi-open headphones to perform like closed-back headphones in a noisy workspace.

For consumers choosing headphones to check restored archival recordings, each row focuses on the most important purchase consideration.

Purchase consideration What to check Who is this important for?
Assessing processing details Listen to the original and restored versions through the same headphones at a comparable volume, and take the sound profile of the specific model into account. If I want to assess the differences between the original and the restoration, a reliable comparison matters to me. Around 33% of consumers put assessing processing details first.
Limiting background noise Check the closed-back design and ear pad fit in your own workspace. Don’t interpret claims such as ‘up to 32 dB’ as guaranteed attenuation for every type of noise. If conversations drown out quiet archival passages, I don’t want to have to turn the volume up. Around 27% of consumers prioritise isolation from background noise.
Fit during long sessions Check the fit over a realistic listening period and, if necessary, try them with glasses. Make sure replacement ear pads and parts are available for the exact model variant. For frequent or lengthy checking sessions, I want headphones that feel comfortable and can be maintained as parts wear out. Around 20% of consumers put wearing comfort and replaceable parts first.
Connection and cable routing Check the audio output on your computer or interface, the connector you need and how the cable will run across your desk, based on the equipment you actually use. If I work at a desktop between two screens, I want to connect my headphones to the audio output I actually use and route the cable sensibly. Around 20% of consumers prioritise the connection and cable routing.

Common misconceptions

  • Open-back doesn’t automatically mean more accurate, and closed-back doesn’t automatically mean unsuitable

    Room noise and sound leaking out affect how suitable headphones are in practice. Beyerdynamic also notes that the open-back DT 990 PRO has emphasised treble; this doesn’t support a general claim about its accuracy with restored archival material.

    Choose a design that suits your listening environment and check any areas of concern with your own material, rather than assuming that the design alone guarantees a reliable assessment.

  • Frequency range and marketing claims don’t prove that sound is neutral

    Technical specifications and manufacturers’ descriptions don’t tell you how a particular pair of headphones will sound on your head, or whether its sound profile will affect your judgement.

    Use technical specifications to distinguish between model variants, and factor fit and listening comparisons with suitable material into your decision.

  • Check the connector and cable routing before you buy

    The models mentioned differ in their connectors, adapters and cable configurations. Having two screens doesn’t determine which audio output you use or mean you’ll need a connection to two audio sources.

    Check that the connection works with your actual playback device and that the cable can be routed sensibly across your desk, using the specifications for the exact model variant.

    Depending on your device and model, you may need a suitable adapter or replacement cable.

Key brands at a glance

beyerdynamic

The DT 770 PRO and DT 990 PRO ranges represent different designs: closed-back and open-back respectively.

  • For the DT 770 PRO 80 Ohm, beyerdynamic lists replaceable ear pads, available spare parts and a 3.5 mm connector with a 6.35 mm adapter.
  • For the open-back DT 990 PRO, the manufacturer describes spacious sound reproduction, but also notes its emphasised treble and lack of full isolation. These are manufacturer claims, not independent audio tests using archival recordings.

Sennheiser

The HD 280 PRO is a wired, closed-back option where isolation and a foldable design may be useful.

  • Sennheiser lists replaceable ear pads and a 3.5 mm connector with a 6.3 mm adapter.
  • The manufacturer’s claim of up to 32 dB of ambient noise attenuation isn’t a guarantee for every fit or noise situation.

Audio-Technica

The established ATH-M40x and ATH-M50x ranges offer options for different monitoring requirements.

  • Audio-Technica describes the ATH-M40x as having isolation properties and swivelling ear cups; for the ATH-M50x, the manufacturer lists a detachable cable.
  • Manufacturers’ claims about neutrality or sound quality aren’t independent measurements, and don’t by themselves prove suitability for checking archival recordings.

AKG

The K240 MKII is a semi-open option for a relatively quiet listening space.

  • AKG lists an over-ear design, a mini XLR connection and two included cables for the K240 MKII.
  • These model features don’t confirm a purchase price in Germany or availability at Joybuy.

Sony

Sony lists the MDR-7506 for broadcasting and studio environments.

  • Sony lists a 40 mm driver and a 3 m cable for this model.
  • Sony’s stated weights differ, so they can’t be used to make a reliable comparison of comfort.

Suitable products at Joybuy

Suitable products coming soon.

Frequently asked questions

Do I need headphones with two audio inputs because I have two screens?

No, not just because you have two displays. What matters is which device outputs the audio and which headphone output it has; a jack plug with an adapter won’t automatically connect to two audio sources.

How should I manage the volume when checking quiet archival passages?

Don’t turn the volume up just because there’s background noise. The World Health Organization recommends listening at a moderate volume, wearing well-fitting headphones and taking regular breaks. Volume and listening duration both affect the risk of hearing damage. This is general advice, not proof that a particular studio model is suitable for your needs.

What should I check before buying when it comes to ear pads and cables?

Check the spare parts available for the exact model variant. beyerdynamic lists ear pads and cables among the spare parts for the DT 770 PRO 80 Ohm; Sennheiser describes the HD 280 PRO as having replaceable ear pads. This doesn’t mean that the same spare parts are available for other models.

What are my rights when shopping online, and who pays any return costs?

When you buy online from a business seller in the EU, you generally have a 14-day right to cancel from the date of delivery, although exceptions may apply. If you cancel, you may have to pay the return costs if the seller has informed you of this and doesn’t choose to cover them. Faulty goods are also generally covered by a legal guarantee of at least two years; this is different from a voluntary manufacturer’s warranty. EU rules on the legal guarantee don’t apply to purchases from private individuals.

What should I look out for when it comes to product safety, and where should I take faulty headphones?

For market surveillance, Germany’s Federal Network Agency lists criteria including the CE marking, whether the product can be identified, manufacturer details and any required information in German. The German Environment Agency advises against putting waste electrical and electronic equipment in household rubbish, and recommends using appropriate collection or return points instead.