Who this guide is for

Editors sharing a room

If you listen back to sections repeatedly, background noise can get in the way. Closed-back headphones can also help reduce sound leakage, although how well they do so depends on the model and the fit.

Guitarists recording with a microphone

If you monitor through your headphones while recording, low sound leakage is important to help prevent the microphone picking up the headphone signal. RTINGS.com and Audio-Technica both cite low sound leakage as a relevant factor when recording.

Editors working in a quiet room

In a quiet room, you can also consider more open designs when making editing and sound decisions. Bear in mind that more sound from your surroundings may get in, and more sound from your headphones may leak out.

What to look for when buying

Closed-back

A good fit if: You edit alongside other people, have distracting background noise or monitor through your headphones while recording guitar.

Trade-off: This design can reduce sound leakage and background noise, but the actual level of isolation also depends on the fit and model. RTINGS.com describes closed-back headphones as more suitable for recording than open-back models.

Open-back

A good fit if: You mostly work on your recordings alone in a quiet setting, and sound leakage won’t bother anyone.

Trade-off: You may hear more sound from your surroundings, and sound from your headphones may leak out more easily. This design is therefore less suited to monitoring right next to a recording microphone.

Semi-open

A good fit if: You work in a quiet listening space and can judge for yourself whether the sound leakage and background noise are acceptable.

Trade-off: “Semi-open” doesn’t automatically mean enough isolation for a shared room or microphone recording. Don’t treat this design as equivalent to closed-back headphones.

Criteria What to look for when buying Who should pay particular attention
Isolation and sound leakage Check the design and fit on your own head; when recording with a microphone, consider how much headphone sound reaches the mic. If I’m recording in a shared room, I want to reduce distracting background noise and keep as much headphone sound as possible out of the microphone. Around 36 % of consumers would make isolation and low sound leakage their top buying priority.
Judging edits and guitar tone Compare familiar sections of your own recording at the same, moderate volume; assess the sound of the specific model rather than relying on its design category alone. When I need to judge small changes to an edit or guitar tone, I want playback that makes it easy to compare my own sections. Around 29 % of consumers would put this ability to assess edits first.
Comfort during longer sessions Try the fit and clamping force over a realistic listening period if possible; consider whether suitable replacement ear pads are available. When listening back repeatedly or for longer periods, I want headphones that fit my head and have comfortable ear pads. About 21 % of consumers would make long-term comfort their top buying priority.
Connection, cable and care Check that the impedance and plug match your headphone output; consider cable length, routing and any adaptors you’ll need. If I want to use my headphones with my existing laptop or audio interface, I want to choose a connection and cable length that work with my desk setup. Approximately 14 % of consumers would consider device connectivity and care first.

Common misconceptions

  • “Studio” or “semi-open” means enough isolation

    If you share a room or use a recording microphone, background noise and sound leaking from your headphones may still be an issue.

    Choose based on your listening space and recording setup. Test how much sound leaks from the specific headphones at your workstation.

  • A higher impedance rating automatically means better sound

    Impedance alone doesn’t tell you how loud a pair of headphones will be with your existing device. Focusrite points out that higher-impedance headphones generally need more power from the headphone output.

    Check the exact model variant against the output on your laptop or audio interface before planning to buy any extra accessories.

    An unsuitable headphone output may make your intended setup harder to use, but extra hardware isn’t always necessary.

  • A top spot in a list proves that a model sounds neutral for your guitar edits

    WELT.de placed the Yamaha HPH-MT5 at the top of its comparison list. HIFI.DE described the Audio-Technica ATH-M50x as having a pronounced bass emphasis. These model-specific comments are no substitute for assessing your own recordings.

    Use comparison lists as a starting point for potential options, then listen to familiar sections yourself at a moderate volume.

Brands to consider

beyerdynamic

The closed-back DT 770 PRO and open-back DT 990 PRO represent two different designs. Both models are available in several impedance variants.

  • The manufacturer lists replaceable ear pads and other spare parts. Its comparison positions the DT 770 PRO for recording and monitoring; this is the manufacturer’s claim.
  • The 32, 80 and 250 Ohm variants each need to be checked against your existing headphone output. An open-back model doesn’t provide the isolation of a closed-back pair when recording.

Audio-Technica

The closed-back ATH-M40x may be worth considering if a detachable cable and different cable options suit your workspace.

  • Audio-Technica lists the ATH-M40x at 35 Ohm, with a foldable design and two cables included: a straight 3-m cable and a coiled cable measuring 1.2 to 3 m.
  • The sound profile described by the manufacturer isn’t independent evidence of how you’ll perceive your own guitar edits.

AKG

The semi-open K240 Studio and closed-back K271 MKII are different options for quiet listening spaces and for monitoring and mixing.

  • AKG lists a mini XLR connection and a 3-m cable for the K240 Studio. The K271 MKII is described as having a closed-back design and comes with two cables, among other features.
  • Semi-open and closed-back designs aren’t interchangeable when sound leakage or isolation matters.

Sony

The MDR-7506 is a wired pair of headphones in Sony’s studio range.

  • Sony Deutschland lists a 40-mm driver, a 3-m cable and a weight of 230 g for the MDR-7506, among other specifications.
  • These manufacturer specifications don’t prove that the headphones will fit you well or perform better when editing guitar recordings.

Yamaha

The closed-back HPH-MT5 is a monitoring option if you’re looking for isolation and a foldable design.

  • Yamaha Deutschland specifies 51 Ohm, a 3-m cable, a 3.5-mm plug and a 6.3-mm adaptor for the HPH-MT5.
  • Manufacturer claims about playback are no substitute for comparing the headphones with your own recordings and existing device.

Joybuy products

Matching products coming soon.

Frequently asked questions

Can I record my acoustic guitar with a microphone while wearing open-back headphones?

If you monitor through your headphones while recording, closed-back headphones are the more obvious place to start because they leak less sound. Check your microphone setup to see whether headphone sound is being picked up in the recording; open-back models provide less isolation.

Do I always need a separate headphone amplifier for a 250-Ohm variant?

Not necessarily. Higher impedance can require more power from the output, but the volume you can achieve also depends on the headphones and the specific output. Check the exact variant against the specifications for your laptop or audio interface.

How can I keep an eye on the volume during long editing sessions?

Listen at a moderate volume and take your total listening time into account. The World Health Organization gives an average of 80 dB for up to 40 hours per week as an example; at higher levels, the corresponding safe listening time is considerably shorter. This is general listening advice, not a product feature.

What can I do if the ear pads are worn or there’s a defect?

Look for replacement ear pads for the exact model variant. If there’s a defect, statutory consumer rights are separate from a voluntary guarantee; the Verbraucherzentrale explains this distinction for consumers in Germany.