Who are the different designs suited to?

For comparing recordings in a quiet listening environment

If you’re assessing several recordings one after another and won’t disturb anyone, open-back headphones may be an option. Keeping playback settings consistent and measuring loudness separately helps you distinguish the level comparison from how loud the headphones themselves can play. Focusrite Support describes open-back models as suitable for the control room and longer listening sessions; EBU R 128 covers loudness measurement for broadcast programmes.

For comparing recordings in a shared room

If conversations make it harder to assess recordings, or there’s a microphone nearby, closed-back headphones may be more practical. Focusrite Support notes that closed-back headphones can reduce sound leakage during microphone recording; how well they fit your head still matters.

What should you look for when buying?

Open-back, wired models

Best suited to: A quiet listening space where sound escaping from the headphones won’t disturb anyone.

Things to consider: This design offers less isolation; if you’re comparing recordings with different ear pads, keep the same pad configuration throughout.

Closed-back, wired models

Best suited to: Situations where conversations or a nearby microphone could affect your work.

Things to consider: Isolation also depends on the fit; the closed-back design alone doesn’t tell you whether the sound or listening level will suit your needs.

What matters What to check before buying Who should consider it?
Consistent playback Keep your monitoring settings constant and measure the loudness of the files separately. If you want to assess several recordings on a like-for-like basis, a louder playback level shouldn’t influence your impression. Around 33% of consumers in this buying scenario put level comparison first.
Isolation in your workspace If there are conversations or you’re using a microphone, check a closed-back model and how it fits. If you work near conversations or a microphone, it’s especially important to account for distractions and sound escaping from your headphones. Around 27% of consumers prioritise isolation.
Cable routing at a standing desk Check the cable length and which side it connects to at your desk; route it so it won’t get caught when you adjust the desk. If you regularly switch between sitting and standing, the cable should move freely around your desk without getting caught. Around 20% of consumers prioritise ease of use when changing desk height.
Connections and replacement parts Check that the audio output, plug and any adapters you need are compatible; look for replacement parts for the exact model. If you want to keep using your existing audio output and replace worn parts, compatibility and parts availability are particularly important. Around 20% of consumers put these considerations first.

Which mistakes should you avoid?

  • Confusing headphones that play loudly with a loudness meter

    The playback volume at the output isn’t a measurement of the loudness of the recording file.

    Keep your monitoring settings constant when comparing recordings, and measure the files separately. EBU R 128 describes loudness measurement for broadcast programmes; its target value isn’t a blanket recommendation for every recording.

  • Choosing open-back headphones without considering your surroundings

    Open-back models offer less isolation and can let sound escape. This may matter if there are conversations nearby or a microphone close at hand.

    If you work in a shared or noisy space, first check whether a well-fitting closed-back model would be better for your situation.

  • Focusing only on impedance or cable length

    Whether headphones play loudly enough from your existing output doesn’t depend on impedance alone. Adjusting your desk also changes the cable’s distance and direction of pull.

    Check the whole equipment set-up and measure the cable route with the desk raised as well. Make sure the cable won’t get caught when you adjust the desk.

Key brands at a glance

beyerdynamic

The DT 900 PRO X is an open-back option, while the DT 700 PRO X is closed-back, making them suitable for different listening environments.

  • According to the manufacturer, both models are wired, have a nominal impedance of 48 ohms and feature detachable cables; replacement parts are available for both.
  • These specifications don’t prove that both models are equally suitable in terms of sound, or that they’ll play loudly enough from every audio output.

Sennheiser

The open-back HD 490 PRO comes with two types of ear pads, designed for producing and mixing respectively.

  • The manufacturer says the ear pads are washable and replaceable; the cable can be connected on either the left or right side.
  • The open-back design offers less isolation. For consistent comparisons, don’t switch between ear pad configurations from one recording to another.

Audio-Technica

The closed-back ATH-M40x is a wired monitoring option for workspaces where isolation matters.

  • Audio-Technica describes the model as over-ear, with sound-isolating properties.
  • The manufacturer’s description is no substitute for trying the fit and listening with recordings you know well.

Neumann

The manufacturer recommends the open-back NDH 30 for editing, mixing and mastering.

  • The open-back design may be an option in a quiet listening environment.
  • In a shared or noisy workspace, bear in mind that it offers less isolation.

AKG

The open-back K702 is another over-ear option for your listening space.

  • AKG lists a nominal impedance of 62 ohms, a detachable cable, replaceable ear pads and a 3.5 mm plug with a 6.3 mm adapter.
  • These specifications don’t confirm whether your particular audio output can drive the headphones sufficiently.

Joybuy products on this topic

Products to suit your needs will be available soon.

Frequently asked questions

Can studio headphones alone equalise the loudness of different recordings?

No. Keep your playback settings constant when listening for comparison, and also measure the files with a loudness tool. EBU R 128 applies to broadcast programmes; its target value of −23 LUFS isn’t a blanket recommendation for all recordings.

Which connection do I need for a standing desk?

Check your audio device’s output against the supplied plug and adapter, and measure the cable route with the desk raised as well. An impedance rating alone doesn’t confirm whether the combination will play loudly enough for you.

How can I keep comparisons consistent during longer listening sessions?

Use the same headphones, ear pads and playback settings for all the recordings you’re comparing. Also make sure you listen at a sensible volume: the German Federal Institute for Occupational Safety and Health warns that loud music through headphones can damage your hearing.

What happens if there’s a fault in Germany?

You should generally direct claims under the statutory guarantee to the seller; any additional manufacturer’s warranty is separate. The German Federal Government describes a two-year statutory guarantee against the retailer. Check separately which repair or replacement-part options are available for the specific headphones.

Is a CE mark required for every studio headphone sold?

You can’t tell from the term “studio headphones” alone. According to the European Commission, CE marking is required only for products covered by the relevant harmonised EU rules; where it isn’t required, it must not be used. For a specific product, check the version and applicable requirements separately.