Which design is right for you?

Mixing piano in a quiet space

If you usually work alone with existing recordings and want to assess the piano’s attack, tonal balance and stereo image, an open-back model may suit you – provided that room noise and sound leaking out aren’t an issue.

Recording in a shared room

If you record with a microphone in the same space or everyday noise distracts you, a well-fitting closed-back design may matter more than an open-back one. How much sound it blocks also depends on the fit.

Mixing for long sessions and switching between devices

If you work for long stretches or switch between a laptop and an audio interface, check the fit over a typical session. Also make sure the socket, plug, adapter and cable length suit the device you actually use.

What should you look for when buying?

Open-back studio headphones

A good fit if: you mix in a quiet space and won’t disturb others with sound leaking out.

Bear in mind: this design doesn’t block room noise; the fit and position of your ears can also affect how the sound comes across.

Closed-back studio headphones

A good fit if: you work in a shared room, room noise distracts you, or you record with a microphone in the same space.

Bear in mind: the design alone doesn’t guarantee neutral sound or enough noise isolation for your needs; check the fit and sound with recordings you know well.

Semi-open studio headphones

A good fit if: you’d like to try this design and don’t need strong isolation or minimal sound leakage.

Bear in mind: ‘semi-open’ doesn’t guarantee enough isolation in a noisy or shared room.

Buying priority What to look for Who is it important to?
Assessing piano sound and the mix Compare recordings of piano you know well and check the sound of the specific model, rather than relying on the word ‘studio’ alone. If I want to assess the attack, tonal balance and stereo image of my recording with confidence, comparing what I hear matters to me. Around 36% of consumers put sound quality first.
Room noise and sound leakage Check how the headphones fit and how well the ear pads seal in your usual listening position; if you’re recording with a microphone, also listen for sound leaking from the headphones. If I share my room or record with a microphone there, I want less noise to distract me and less sound to leak out while monitoring. Around 29% of consumers prioritise isolation.
Fit during long sessions Try the ear pads and headband with your usual glasses for a typical work session; if needed, check whether suitable replacement ear pads are available. If I’m working on a mix for a long time, I want a fit that stays comfortable throughout a typical session. Around 21% of consumers put long-term comfort first.
Connections and replacement parts Check that the socket, plug, adapter and cable length of the specific model work with your laptop or audio interface; start at a low volume and increase it carefully. If I switch between devices or work at a small desk, I want to check the connection and cable routing in advance. Around 14% of consumers prioritise connectivity and maintenance.

Common buying mistakes

  • Assuming ‘studio’ or ‘flat’ guarantees a good piano mix

    Manufacturer descriptions are no substitute for listening to your own material. The fit and position of your ears can also affect how the sound comes across.

    Compare recordings of piano you know well and, if possible, check your mix on another playback system too.

  • Choosing open-back or semi-open models for uninterrupted microphone recording

    An open-back or semi-open design won’t solve problems with room noise or sound leaking from the headphones. ‘Semi-open’ doesn’t automatically mean enough isolation.

    Consider recording and mixing separately when choosing. If isolation matters, try a closed-back model in your usual listening position.

  • Focusing only on the impedance

    For everyday use, the headphone output, volume level, plug and cable routing all matter too.

    Check the connection on your device and what’s included with the specific model. Only buy accessories if you find you actually need them.

    Depending on the socket, you may need a suitable adapter; a replacement cable is only worth considering if the one supplied isn’t suitable or needs replacing.

Key brands at a glance

beyerdynamic

beyerdynamic describes the open-back DT 900 PRO X as a model for mixing and mastering, and the closed-back DT 700 PRO X as suitable for recording and monitoring too.

  • The manufacturer lists 48 ohms and detachable cables for both models; replacement parts are available.
  • The different designs can help you choose headphones for your listening space, but they don’t establish a ranking for sound accuracy.

Sennheiser

Sennheiser describes the open-back HD 560S as reference headphones for quiet listening spaces and comparing mixes.

  • The manufacturer lists a 120-ohm driver and a detachable cable. Sennheiser Support says an amplifier isn’t always necessary, although it may help with tracks that have a wide dynamic range.
  • An independent test by Headphones.com describes the tested pair as offering little isolation, with the sound affected by how the headphones sit on your ears.

Audio-Technica

Audio-Technica offers the closed-back ATH-M40x for tracking, monitoring and mixing.

  • The manufacturer lists a foldable design and two detachable cables.
  • Manufacturer claims about flat sound or isolation are no substitute for checking the sound and fit in your own room.

AKG

AKG describes the semi-open K240 Studio as suitable for mixing and playback.

  • AKG lists a detachable cable and replaceable ear pads.
  • The semi-open design doesn’t guarantee enough isolation for microphone recording or use in a shared room.

Suitable products on Joybuy

Related products will be available soon.

Frequently asked questions

Are open-back headphones suitable for my student room?

If you mix in a quiet space without disturbing anyone with sound leakage, an open-back model is worth considering. If there’s room noise, you share your room, or you’re recording with a microphone at the same time, try a well-fitting closed-back model first: open-back headphones don’t block out noise.

Do I definitely need a separate headphone amplifier for the Sennheiser HD 560S?

No. Sennheiser Support says a separate amplifier isn’t always necessary. The 120-ohm headphones may benefit from one when you’re listening to tracks with a wide dynamic range; what matters is whether your existing output can deliver enough volume without distortion.

What should I check before connecting my headphones and when looking after them?

Before buying accessories, check that the socket, plug and supplied adapter for the specific model work with your device. For models with a detachable cable or replaceable ear pads, check that suitable replacement parts are available. Start listening at a low volume and take breaks during longer sessions.

What rights do I have if I buy a faulty product online from a trader?

For a consumer purchase in the EU, you’re generally entitled to a statutory guarantee of at least two years from the date you receive the goods; a voluntary manufacturer’s warranty doesn’t replace it. Distance purchases generally come with a 14-day right to cancel, subject to statutory exceptions. These consumer rights aren’t special approval or usage requirements for studio headphones.